233 lines
7.8 KiB
YAML
233 lines
7.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MediaTek MT8188 Pin Controller
|
|
|
|
maintainers:
|
|
- Hui Liu <hui.liu@mediatek.com>
|
|
|
|
description:
|
|
The MediaTek's MT8188 Pin controller is used to control SoC pins.
|
|
|
|
properties:
|
|
compatible:
|
|
const: mediatek,mt8188-pinctrl
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
description:
|
|
Number of cells in GPIO specifier, should be two. The first cell is the
|
|
pin number, the second cell is used to specify optional parameters which
|
|
are defined in <dt-bindings/gpio/gpio.h>.
|
|
const: 2
|
|
|
|
gpio-ranges:
|
|
maxItems: 1
|
|
|
|
gpio-line-names: true
|
|
|
|
reg:
|
|
items:
|
|
- description: gpio registers base address
|
|
- description: rm group io configuration registers base address
|
|
- description: lt group io configuration registers base address
|
|
- description: lm group io configuration registers base address
|
|
- description: rt group io configuration registers base address
|
|
- description: eint registers base address
|
|
|
|
reg-names:
|
|
items:
|
|
- const: iocfg0
|
|
- const: iocfg_rm
|
|
- const: iocfg_lt
|
|
- const: iocfg_lm
|
|
- const: iocfg_rt
|
|
- const: eint
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
interrupts:
|
|
description: The interrupt outputs to sysirq.
|
|
maxItems: 1
|
|
|
|
mediatek,rsel-resistance-in-si-unit:
|
|
type: boolean
|
|
description:
|
|
We provide two methods to select the resistance for I2C when pull up or
|
|
pull down. The first is by RSEL definition value, another one is by
|
|
resistance value(ohm). This flag is used to identify if the method is
|
|
resistance(si unit) value.
|
|
|
|
# PIN CONFIGURATION NODES
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
'^pins':
|
|
type: object
|
|
$ref: /schemas/pinctrl/pincfg-node.yaml
|
|
additionalProperties: false
|
|
description:
|
|
A pinctrl node should contain at least one subnode representing the
|
|
pinctrl groups available on the machine. Each subnode will list the
|
|
pins it needs, and how they should be configured, with regard to muxer
|
|
configuration, pullups, drive strength, input enable/disable and input
|
|
schmitt.
|
|
|
|
properties:
|
|
pinmux:
|
|
description:
|
|
Integer array, represents gpio pin number and mux setting.
|
|
Supported pin number and mux varies for different SoCs, and are
|
|
defined as macros in dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h
|
|
directly, for this SoC.
|
|
|
|
drive-strength:
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
|
|
|
drive-strength-microamp:
|
|
enum: [125, 250, 500, 1000]
|
|
|
|
bias-pull-down:
|
|
oneOf:
|
|
- type: boolean
|
|
- enum: [100, 101, 102, 103]
|
|
description: mt8188 pull down PUPD/R0/R1 type define value.
|
|
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
|
|
description: mt8188 pull down RSEL type define value.
|
|
- enum: [75000, 5000]
|
|
description: mt8188 pull down RSEL type si unit value(ohm).
|
|
description: |
|
|
For pull down type is normal, it doesn't need add RSEL & R1R0
|
|
define and resistance value.
|
|
For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
|
|
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
|
|
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
|
|
"MTK_PUPD_SET_R1R0_11" define in mt8188.
|
|
For pull down type is RSEL, it can add RSEL define & resistance
|
|
value(ohm) to set different resistance by identifying property
|
|
"mediatek,rsel-resistance-in-si-unit". It can support
|
|
"MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
|
|
"MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
|
|
"MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
|
|
"MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
|
|
mt8188. It can also support resistance value(ohm) "75000" & "5000"
|
|
in mt8188.
|
|
|
|
bias-pull-up:
|
|
oneOf:
|
|
- type: boolean
|
|
- enum: [100, 101, 102, 103]
|
|
description: mt8188 pull up PUPD/R0/R1 type define value.
|
|
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
|
|
description: mt8188 pull up RSEL type define value.
|
|
- enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
|
|
description: mt8188 pull up RSEL type si unit value(ohm).
|
|
description: |
|
|
For pull up type is normal, it don't need add RSEL & R1R0 define
|
|
and resistance value.
|
|
For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set
|
|
different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
|
|
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
|
|
"MTK_PUPD_SET_R1R0_11" define in mt8188.
|
|
For pull up type is RSEL, it can add RSEL define & resistance
|
|
value(ohm) to set different resistance by identifying property
|
|
"mediatek,rsel-resistance-in-si-unit". It can support
|
|
"MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
|
|
"MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
|
|
"MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
|
|
"MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
|
|
mt8188. It can also support resistance value(ohm) "1000" & "1500"
|
|
& "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
|
|
|
|
bias-disable: true
|
|
|
|
output-high: true
|
|
|
|
output-low: true
|
|
|
|
input-enable: true
|
|
|
|
input-disable: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
required:
|
|
- pinmux
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- gpio-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
pio: pinctrl@10005000 {
|
|
compatible = "mediatek,mt8188-pinctrl";
|
|
reg = <0x10005000 0x1000>,
|
|
<0x11c00000 0x1000>,
|
|
<0x11e10000 0x1000>,
|
|
<0x11e20000 0x1000>,
|
|
<0x11ea0000 0x1000>,
|
|
<0x1000b000 0x1000>;
|
|
reg-names = "iocfg0", "iocfg_rm",
|
|
"iocfg_lt", "iocfg_lm", "iocfg_rt",
|
|
"eint";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pio 0 0 176>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#interrupt-cells = <2>;
|
|
|
|
pio-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
spi0-pins {
|
|
pins-spi {
|
|
pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
|
|
<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
|
|
<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
|
|
drive-strength = <6>;
|
|
};
|
|
pins-spi-mi {
|
|
pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
};
|
|
|
|
i2c0-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
|
|
<PINMUX_GPIO56__FUNC_B1_SDA0>;
|
|
bias-disable;
|
|
drive-strength-microamp = <1000>;
|
|
};
|
|
};
|
|
};
|