82 lines
1.9 KiB
YAML
82 lines
1.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Lattice Slave SPI sysCONFIG FPGA manager
|
|
|
|
maintainers:
|
|
- Vladimir Georgiev <v.georgiev@metrotek.ru>
|
|
|
|
description: |
|
|
Lattice sysCONFIG port, which is used for FPGA configuration, among others,
|
|
have Slave Serial Peripheral Interface. Only full reconfiguration is
|
|
supported.
|
|
|
|
Programming of ECP5 is done by writing uncompressed bitstream image in .bit
|
|
format into FPGA's SRAM configuration memory.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- lattice,sysconfig-ecp5
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
program-gpios:
|
|
description:
|
|
A GPIO line connected to PROGRAMN (active low) pin of the device.
|
|
Initiates configuration sequence.
|
|
maxItems: 1
|
|
|
|
init-gpios:
|
|
description:
|
|
A GPIO line connected to INITN (active low) pin of the device.
|
|
Indicates that the FPGA is ready to be configured.
|
|
maxItems: 1
|
|
|
|
done-gpios:
|
|
description:
|
|
A GPIO line connected to DONE (active high) pin of the device.
|
|
Indicates that the configuration sequence is complete.
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: lattice,sysconfig-ecp5
|
|
then:
|
|
properties:
|
|
spi-max-frequency:
|
|
maximum: 60000000
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
fpga-mgr@0 {
|
|
compatible = "lattice,sysconfig-ecp5";
|
|
reg = <0>;
|
|
spi-max-frequency = <20000000>;
|
|
program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
|
|
init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
|
|
done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|