107 lines
3.3 KiB
YAML
107 lines
3.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics STM32 MDMA Controller
|
|
|
|
description: |
|
|
The STM32 MDMA is a general-purpose direct memory access controller capable of
|
|
supporting 64 independent DMA channels with 256 HW requests.
|
|
DMA clients connected to the STM32 MDMA controller must use the format
|
|
described in the dma.txt file, using a five-cell specifier for each channel:
|
|
a phandle to the MDMA controller plus the following five integer cells:
|
|
1. The request line number
|
|
2. The priority level
|
|
0x0: Low
|
|
0x1: Medium
|
|
0x2: High
|
|
0x3: Very high
|
|
3. A 32bit mask specifying the DMA channel configuration
|
|
-bit 0-1: Source increment mode
|
|
0x0: Source address pointer is fixed
|
|
0x2: Source address pointer is incremented after each data transfer
|
|
0x3: Source address pointer is decremented after each data transfer
|
|
-bit 2-3: Destination increment mode
|
|
0x0: Destination address pointer is fixed
|
|
0x2: Destination address pointer is incremented after each data transfer
|
|
0x3: Destination address pointer is decremented after each data transfer
|
|
-bit 8-9: Source increment offset size
|
|
0x0: byte (8bit)
|
|
0x1: half-word (16bit)
|
|
0x2: word (32bit)
|
|
0x3: double-word (64bit)
|
|
-bit 10-11: Destination increment offset size
|
|
0x0: byte (8bit)
|
|
0x1: half-word (16bit)
|
|
0x2: word (32bit)
|
|
0x3: double-word (64bit)
|
|
-bit 25-18: The number of bytes to be transferred in a single transfer
|
|
(min = 1 byte, max = 128 bytes)
|
|
-bit 29:28: Trigger Mode
|
|
0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
|
|
0x1: Each MDMA request triggers a block transfer (max 64K bytes)
|
|
0x2: Each MDMA request triggers a repeated block transfer
|
|
0x3: Each MDMA request triggers a linked list transfer
|
|
4. A 32bit value specifying the register to be used to acknowledge the request
|
|
if no HW ack signal is used by the MDMA client
|
|
5. A 32bit mask specifying the value to be written to acknowledge the request
|
|
if no HW ack signal is used by the MDMA client
|
|
|
|
maintainers:
|
|
- Amelie Delaunay <amelie.delaunay@foss.st.com>
|
|
|
|
allOf:
|
|
- $ref: dma-controller.yaml#
|
|
|
|
properties:
|
|
"#dma-cells":
|
|
const: 5
|
|
|
|
compatible:
|
|
const: st,stm32h7-mdma
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
st,ahb-addr-masks:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description: Array of u32 mask to list memory devices addressed via AHB bus.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- interrupts
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
dma-controller@52000000 {
|
|
compatible = "st,stm32h7-mdma";
|
|
reg = <0x52000000 0x1000>;
|
|
interrupts = <122>;
|
|
clocks = <&timer_clk>;
|
|
resets = <&rcc 992>;
|
|
#dma-cells = <5>;
|
|
dma-channels = <16>;
|
|
dma-requests = <32>;
|
|
st,ahb-addr-masks = <0x20000000>, <0x00000000>;
|
|
};
|
|
|
|
...
|