45 lines
1.3 KiB
Plaintext
45 lines
1.3 KiB
Plaintext
* Spreadtrum DMA controller
|
|
|
|
This binding follows the generic DMA bindings defined in dma.txt.
|
|
|
|
Required properties:
|
|
- compatible: Should be "sprd,sc9860-dma".
|
|
- reg: Should contain DMA registers location and length.
|
|
- interrupts: Should contain one interrupt shared by all channel.
|
|
- #dma-cells: must be <1>. Used to represent the number of integer
|
|
cells in the dmas property of client device.
|
|
- dma-channels : Number of DMA channels supported. Should be 32.
|
|
- clock-names: Should contain the clock of the DMA controller.
|
|
- clocks: Should contain a clock specifier for each entry in clock-names.
|
|
|
|
Deprecated properties:
|
|
- #dma-channels : Number of DMA channels supported. Should be 32.
|
|
|
|
Example:
|
|
|
|
Controller:
|
|
apdma: dma-controller@20100000 {
|
|
compatible = "sprd,sc9860-dma";
|
|
reg = <0x20100000 0x4000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <32>;
|
|
clock-names = "enable";
|
|
clocks = <&clk_ap_ahb_gates 5>;
|
|
};
|
|
|
|
|
|
Client:
|
|
DMA clients connected to the Spreadtrum DMA controller must use the format
|
|
described in the dma.txt file, using a two-cell specifier for each channel.
|
|
The two cells in order are:
|
|
1. A phandle pointing to the DMA controller.
|
|
2. The slave id.
|
|
|
|
spi0: spi@70a00000{
|
|
...
|
|
dma-names = "rx_chn", "tx_chn";
|
|
dmas = <&apdma 11>, <&apdma 12>;
|
|
...
|
|
};
|