971 lines
25 KiB
C
971 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// TAS2781 HDA I2C driver
|
|
//
|
|
// Copyright 2023 Texas Instruments, Inc.
|
|
//
|
|
// Author: Shenghao Ding <shenghao-ding@ti.com>
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/crc8.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/efi.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <sound/hda_codec.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/tas2781.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/tas2781-tlv.h>
|
|
|
|
#include "hda_local.h"
|
|
#include "hda_auto_parser.h"
|
|
#include "hda_component.h"
|
|
#include "hda_jack.h"
|
|
#include "hda_generic.h"
|
|
|
|
#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20
|
|
|
|
/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD
|
|
* Define two controls, one is Volume control callbacks, the other is
|
|
* flag setting control callbacks.
|
|
*/
|
|
|
|
/* Volume control callbacks for tas2781 */
|
|
#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \
|
|
xhandler_get, xhandler_put, tlv_array) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\
|
|
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
|
|
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
|
|
.tlv.p = (tlv_array), \
|
|
.info = snd_soc_info_volsw_range, \
|
|
.get = xhandler_get, .put = xhandler_put, \
|
|
.private_value = (unsigned long)&(struct soc_mixer_control) \
|
|
{.reg = xreg, .rreg = xreg, .shift = xshift, \
|
|
.rshift = xshift, .min = xmin, .max = xmax, \
|
|
.invert = xinvert} }
|
|
|
|
/* Flag control callbacks for tas2781 */
|
|
#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \
|
|
.info = snd_ctl_boolean_mono_info, \
|
|
.get = xhandler_get, .put = xhandler_put, \
|
|
.private_value = xdata }
|
|
|
|
enum calib_data {
|
|
R0_VAL = 0,
|
|
INV_R0,
|
|
R0LOW,
|
|
POWER,
|
|
TLIM,
|
|
CALIB_MAX
|
|
};
|
|
|
|
#define TAS2563_MAX_CHANNELS 4
|
|
|
|
#define TAS2563_CAL_POWER TASDEVICE_REG(0, 0x0d, 0x3c)
|
|
#define TAS2563_CAL_R0 TASDEVICE_REG(0, 0x0f, 0x34)
|
|
#define TAS2563_CAL_INVR0 TASDEVICE_REG(0, 0x0f, 0x40)
|
|
#define TAS2563_CAL_R0_LOW TASDEVICE_REG(0, 0x0f, 0x48)
|
|
#define TAS2563_CAL_TLIM TASDEVICE_REG(0, 0x10, 0x14)
|
|
#define TAS2563_CAL_N 5
|
|
#define TAS2563_CAL_DATA_SIZE 4
|
|
#define TAS2563_CAL_CH_SIZE 20
|
|
#define TAS2563_CAL_ARRAY_SIZE 80
|
|
|
|
static unsigned int cal_regs[TAS2563_CAL_N] = {
|
|
TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0,
|
|
TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM,
|
|
};
|
|
|
|
|
|
struct tas2781_hda {
|
|
struct device *dev;
|
|
struct tasdevice_priv *priv;
|
|
struct snd_kcontrol *dsp_prog_ctl;
|
|
struct snd_kcontrol *dsp_conf_ctl;
|
|
struct snd_kcontrol *prof_ctl;
|
|
struct snd_kcontrol *snd_ctls[2];
|
|
};
|
|
|
|
static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
|
|
{
|
|
struct tasdevice_priv *tas_priv = data;
|
|
struct acpi_resource_i2c_serialbus *sb;
|
|
|
|
if (i2c_acpi_get_i2c_resource(ares, &sb)) {
|
|
if (tas_priv->ndev < TASDEVICE_MAX_CHANNELS &&
|
|
sb->slave_address != tas_priv->global_addr) {
|
|
tas_priv->tasdevice[tas_priv->ndev].dev_addr =
|
|
(unsigned int)sb->slave_address;
|
|
tas_priv->ndev++;
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid)
|
|
{
|
|
struct acpi_device *adev;
|
|
struct device *physdev;
|
|
LIST_HEAD(resources);
|
|
const char *sub;
|
|
int ret;
|
|
|
|
adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
|
|
if (!adev) {
|
|
dev_err(p->dev,
|
|
"Failed to find an ACPI device for %s\n", hid);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = acpi_dev_get_resources(adev, &resources, tas2781_get_i2c_res, p);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
acpi_dev_free_resource_list(&resources);
|
|
strscpy(p->dev_name, hid, sizeof(p->dev_name));
|
|
physdev = get_device(acpi_get_first_physical_node(adev));
|
|
acpi_dev_put(adev);
|
|
|
|
/* No side-effect to the playback even if subsystem_id is NULL*/
|
|
sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev));
|
|
if (IS_ERR(sub))
|
|
sub = NULL;
|
|
|
|
p->acpi_subsystem_id = sub;
|
|
|
|
put_device(physdev);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(p->dev, "read acpi error, ret: %d\n", ret);
|
|
acpi_dev_put(adev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tas2781_hda_playback_hook(struct device *dev, int action)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(tas_hda->dev, "%s: action = %d\n", __func__, action);
|
|
switch (action) {
|
|
case HDA_GEN_PCM_ACT_OPEN:
|
|
pm_runtime_get_sync(dev);
|
|
mutex_lock(&tas_hda->priv->codec_lock);
|
|
tasdevice_tuning_switch(tas_hda->priv, 0);
|
|
tas_hda->priv->playback_started = true;
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
break;
|
|
case HDA_GEN_PCM_ACT_CLOSE:
|
|
mutex_lock(&tas_hda->priv->codec_lock);
|
|
tasdevice_tuning_switch(tas_hda->priv, 1);
|
|
tas_hda->priv->playback_started = false;
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
break;
|
|
default:
|
|
dev_dbg(tas_hda->dev, "Playback action not supported: %d\n",
|
|
action);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int tasdevice_info_profile(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id;
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
int nr_profile = ucontrol->value.integer.value[0];
|
|
int max = tas_priv->rcabin.ncfgs - 1;
|
|
int val, ret = 0;
|
|
|
|
val = clamp(nr_profile, 0, max);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
if (tas_priv->rcabin.profile_cfg_id != val) {
|
|
tas_priv->rcabin.profile_cfg_id = val;
|
|
ret = 1;
|
|
}
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tasdevice_info_programs(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
struct tasdevice_fw *tas_fw = tas_priv->fmw;
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = tas_fw->nr_programs - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tasdevice_info_config(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
struct tasdevice_fw *tas_fw = tas_priv->fmw;
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = tas_fw->nr_configurations - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tasdevice_program_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
ucontrol->value.integer.value[0] = tas_priv->cur_prog;
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tasdevice_program_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
struct tasdevice_fw *tas_fw = tas_priv->fmw;
|
|
int nr_program = ucontrol->value.integer.value[0];
|
|
int max = tas_fw->nr_programs - 1;
|
|
int val, ret = 0;
|
|
|
|
val = clamp(nr_program, 0, max);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
if (tas_priv->cur_prog != val) {
|
|
tas_priv->cur_prog = val;
|
|
ret = 1;
|
|
}
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tasdevice_config_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
ucontrol->value.integer.value[0] = tas_priv->cur_conf;
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tasdevice_config_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
struct tasdevice_fw *tas_fw = tas_priv->fmw;
|
|
int nr_config = ucontrol->value.integer.value[0];
|
|
int max = tas_fw->nr_configurations - 1;
|
|
int val, ret = 0;
|
|
|
|
val = clamp(nr_config, 0, max);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
if (tas_priv->cur_conf != val) {
|
|
tas_priv->cur_conf = val;
|
|
ret = 1;
|
|
}
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
int ret;
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
ret = tasdevice_amp_getvol(tas_priv, ucontrol, mc);
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
int ret;
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
/* The check of the given value is in tasdevice_amp_putvol. */
|
|
ret = tasdevice_amp_putvol(tas_priv, ucontrol, mc);
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status;
|
|
dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
|
|
tas_priv->force_fwload_status ? "ON" : "OFF");
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
|
|
bool change, val = (bool)ucontrol->value.integer.value[0];
|
|
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
if (tas_priv->force_fwload_status == val)
|
|
change = false;
|
|
else {
|
|
change = true;
|
|
tas_priv->force_fwload_status = val;
|
|
}
|
|
dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
|
|
tas_priv->force_fwload_status ? "ON" : "OFF");
|
|
|
|
mutex_unlock(&tas_priv->codec_lock);
|
|
|
|
return change;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new tas2781_snd_controls[] = {
|
|
ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL,
|
|
1, 0, 20, 0, tas2781_amp_getvol,
|
|
tas2781_amp_putvol, amp_vol_tlv),
|
|
ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0,
|
|
tas2781_force_fwload_get, tas2781_force_fwload_put),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new tas2781_prof_ctrl = {
|
|
.name = "Speaker Profile Id",
|
|
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
|
|
.info = tasdevice_info_profile,
|
|
.get = tasdevice_get_profile_id,
|
|
.put = tasdevice_set_profile_id,
|
|
};
|
|
|
|
static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl = {
|
|
.name = "Speaker Program Id",
|
|
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
|
|
.info = tasdevice_info_programs,
|
|
.get = tasdevice_program_get,
|
|
.put = tasdevice_program_put,
|
|
};
|
|
|
|
static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl = {
|
|
.name = "Speaker Config Id",
|
|
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
|
|
.info = tasdevice_info_config,
|
|
.get = tasdevice_config_get,
|
|
.put = tasdevice_config_put,
|
|
};
|
|
|
|
static void tas2563_apply_calib(struct tasdevice_priv *tas_priv)
|
|
{
|
|
int offset = 0;
|
|
__be32 data;
|
|
int ret;
|
|
|
|
for (int i = 0; i < tas_priv->ndev; i++) {
|
|
for (int j = 0; j < TAS2563_CAL_N; ++j) {
|
|
data = cpu_to_be32(
|
|
*(uint32_t *)&tas_priv->cali_data.data[offset]);
|
|
ret = tasdevice_dev_bulk_write(tas_priv, i, cal_regs[j],
|
|
(unsigned char *)&data, TAS2563_CAL_DATA_SIZE);
|
|
if (ret)
|
|
dev_err(tas_priv->dev,
|
|
"Error writing calib regs\n");
|
|
offset += TAS2563_CAL_DATA_SIZE;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int tas2563_save_calibration(struct tasdevice_priv *tas_priv)
|
|
{
|
|
static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
|
|
0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
|
|
|
|
static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = {
|
|
{ L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" },
|
|
{ L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" },
|
|
{ L"Power_3", L"R0_3", L"InvR0_3", L"R0_Low_3", L"TLim_3" },
|
|
{ L"Power_4", L"R0_4", L"InvR0_4", L"R0_Low_4", L"TLim_4" },
|
|
};
|
|
|
|
unsigned long max_size = TAS2563_CAL_DATA_SIZE;
|
|
unsigned int offset = 0;
|
|
efi_status_t status;
|
|
unsigned int attr;
|
|
|
|
tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev,
|
|
TAS2563_CAL_ARRAY_SIZE, GFP_KERNEL);
|
|
if (!tas_priv->cali_data.data)
|
|
return -ENOMEM;
|
|
|
|
for (int i = 0; i < tas_priv->ndev; ++i) {
|
|
for (int j = 0; j < TAS2563_CAL_N; ++j) {
|
|
status = efi.get_variable(efi_vars[i][j],
|
|
&efi_guid, &attr, &max_size,
|
|
&tas_priv->cali_data.data[offset]);
|
|
if (status != EFI_SUCCESS ||
|
|
max_size != TAS2563_CAL_DATA_SIZE) {
|
|
dev_warn(tas_priv->dev,
|
|
"Calibration data read failed %ld\n", status);
|
|
return -EINVAL;
|
|
}
|
|
offset += TAS2563_CAL_DATA_SIZE;
|
|
}
|
|
}
|
|
|
|
tas_priv->cali_data.total_sz = offset;
|
|
tasdevice_apply_calibration(tas_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
|
|
{
|
|
static const unsigned char page_array[CALIB_MAX] = {
|
|
0x17, 0x18, 0x18, 0x13, 0x18,
|
|
};
|
|
static const unsigned char rgno_array[CALIB_MAX] = {
|
|
0x74, 0x0c, 0x14, 0x70, 0x7c,
|
|
};
|
|
unsigned char *data;
|
|
int i, j, rc;
|
|
|
|
for (i = 0; i < tas_priv->ndev; i++) {
|
|
data = tas_priv->cali_data.data +
|
|
i * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
|
|
for (j = 0; j < CALIB_MAX; j++) {
|
|
rc = tasdevice_dev_bulk_write(tas_priv, i,
|
|
TASDEVICE_REG(0, page_array[j], rgno_array[j]),
|
|
&(data[4 * j]), 4);
|
|
if (rc < 0)
|
|
dev_err(tas_priv->dev,
|
|
"chn %d calib %d bulk_wr err = %d\n",
|
|
i, j, rc);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Update the calibration data, including speaker impedance, f0, etc, into algo.
|
|
* Calibrate data is done by manufacturer in the factory. These data are used
|
|
* by Algo for calculating the speaker temperature, speaker membrane excursion
|
|
* and f0 in real time during playback.
|
|
*/
|
|
static int tas2781_save_calibration(struct tasdevice_priv *tas_priv)
|
|
{
|
|
efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d,
|
|
0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3);
|
|
static efi_char16_t efi_name[] = L"CALI_DATA";
|
|
struct tm *tm = &tas_priv->tm;
|
|
unsigned int attr, crc;
|
|
unsigned int *tmp_val;
|
|
efi_status_t status;
|
|
|
|
/* Lenovo devices */
|
|
if (tas_priv->catlog_id == LENOVO)
|
|
efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09,
|
|
0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
|
|
|
|
tas_priv->cali_data.total_sz = 0;
|
|
/* Get real size of UEFI variable */
|
|
status = efi.get_variable(efi_name, &efi_guid, &attr,
|
|
&tas_priv->cali_data.total_sz, tas_priv->cali_data.data);
|
|
if (status == EFI_BUFFER_TOO_SMALL) {
|
|
/* Allocate data buffer of data_size bytes */
|
|
tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev,
|
|
tas_priv->cali_data.total_sz, GFP_KERNEL);
|
|
if (!tas_priv->cali_data.data)
|
|
return -ENOMEM;
|
|
/* Get variable contents into buffer */
|
|
status = efi.get_variable(efi_name, &efi_guid, &attr,
|
|
&tas_priv->cali_data.total_sz,
|
|
tas_priv->cali_data.data);
|
|
}
|
|
if (status != EFI_SUCCESS)
|
|
return -EINVAL;
|
|
|
|
tmp_val = (unsigned int *)tas_priv->cali_data.data;
|
|
|
|
crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0;
|
|
dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n",
|
|
crc, tmp_val[21]);
|
|
|
|
if (crc == tmp_val[21]) {
|
|
time64_to_tm(tmp_val[20], 0, tm);
|
|
dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
|
|
tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
tasdevice_apply_calibration(tas_priv);
|
|
} else
|
|
tas_priv->cali_data.total_sz = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda)
|
|
{
|
|
struct hda_codec *codec = tas_hda->priv->codec;
|
|
|
|
if (tas_hda->dsp_prog_ctl)
|
|
snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl);
|
|
|
|
if (tas_hda->dsp_conf_ctl)
|
|
snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl);
|
|
|
|
for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--)
|
|
if (tas_hda->snd_ctls[i])
|
|
snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]);
|
|
|
|
if (tas_hda->prof_ctl)
|
|
snd_ctl_remove(codec->card, tas_hda->prof_ctl);
|
|
}
|
|
|
|
static void tasdev_fw_ready(const struct firmware *fmw, void *context)
|
|
{
|
|
struct tasdevice_priv *tas_priv = context;
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev);
|
|
struct hda_codec *codec = tas_priv->codec;
|
|
int i, ret;
|
|
|
|
pm_runtime_get_sync(tas_priv->dev);
|
|
mutex_lock(&tas_priv->codec_lock);
|
|
|
|
ret = tasdevice_rca_parser(tas_priv, fmw);
|
|
if (ret)
|
|
goto out;
|
|
|
|
tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl, tas_priv);
|
|
ret = snd_ctl_add(codec->card, tas_hda->prof_ctl);
|
|
if (ret) {
|
|
dev_err(tas_priv->dev,
|
|
"Failed to add KControl %s = %d\n",
|
|
tas2781_prof_ctrl.name, ret);
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tas2781_snd_controls); i++) {
|
|
tas_hda->snd_ctls[i] = snd_ctl_new1(&tas2781_snd_controls[i],
|
|
tas_priv);
|
|
ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]);
|
|
if (ret) {
|
|
dev_err(tas_priv->dev,
|
|
"Failed to add KControl %s = %d\n",
|
|
tas2781_snd_controls[i].name, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
tasdevice_dsp_remove(tas_priv);
|
|
|
|
tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
|
|
scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%04X.bin",
|
|
codec->core.subsystem_id & 0xffff);
|
|
ret = tasdevice_dsp_parser(tas_priv);
|
|
if (ret) {
|
|
dev_err(tas_priv->dev, "dspfw load %s error\n",
|
|
tas_priv->coef_binaryname);
|
|
tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
|
|
goto out;
|
|
}
|
|
|
|
tas_hda->dsp_prog_ctl = snd_ctl_new1(&tas2781_dsp_prog_ctrl,
|
|
tas_priv);
|
|
ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl);
|
|
if (ret) {
|
|
dev_err(tas_priv->dev,
|
|
"Failed to add KControl %s = %d\n",
|
|
tas2781_dsp_prog_ctrl.name, ret);
|
|
goto out;
|
|
}
|
|
|
|
tas_hda->dsp_conf_ctl = snd_ctl_new1(&tas2781_dsp_conf_ctrl,
|
|
tas_priv);
|
|
ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl);
|
|
if (ret) {
|
|
dev_err(tas_priv->dev,
|
|
"Failed to add KControl %s = %d\n",
|
|
tas2781_dsp_conf_ctrl.name, ret);
|
|
goto out;
|
|
}
|
|
|
|
tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
|
|
tasdevice_prmg_load(tas_priv, 0);
|
|
if (tas_priv->fmw->nr_programs > 0)
|
|
tas_priv->cur_prog = 0;
|
|
if (tas_priv->fmw->nr_configurations > 0)
|
|
tas_priv->cur_conf = 0;
|
|
|
|
/* If calibrated data occurs error, dsp will still works with default
|
|
* calibrated data inside algo.
|
|
*/
|
|
tasdevice_save_calibration(tas_priv);
|
|
|
|
tasdevice_tuning_switch(tas_hda->priv, 0);
|
|
tas_hda->priv->playback_started = true;
|
|
|
|
out:
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
if (fmw)
|
|
release_firmware(fmw);
|
|
pm_runtime_mark_last_busy(tas_hda->dev);
|
|
pm_runtime_put_autosuspend(tas_hda->dev);
|
|
}
|
|
|
|
static int tas2781_hda_bind(struct device *dev, struct device *master,
|
|
void *master_data)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
struct hda_component *comps = master_data;
|
|
struct hda_codec *codec;
|
|
unsigned int subid;
|
|
int ret;
|
|
|
|
if (!comps || tas_hda->priv->index < 0 ||
|
|
tas_hda->priv->index >= HDA_MAX_COMPONENTS)
|
|
return -EINVAL;
|
|
|
|
comps = &comps[tas_hda->priv->index];
|
|
if (comps->dev)
|
|
return -EBUSY;
|
|
|
|
codec = comps->codec;
|
|
subid = codec->core.subsystem_id >> 16;
|
|
|
|
switch (subid) {
|
|
case 0x17aa:
|
|
tas_hda->priv->catlog_id = LENOVO;
|
|
break;
|
|
default:
|
|
tas_hda->priv->catlog_id = OTHERS;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_get_sync(dev);
|
|
|
|
comps->dev = dev;
|
|
|
|
strscpy(comps->name, dev_name(dev), sizeof(comps->name));
|
|
|
|
ret = tascodec_init(tas_hda->priv, codec, THIS_MODULE, tasdev_fw_ready);
|
|
if (!ret)
|
|
comps->playback_hook = tas2781_hda_playback_hook;
|
|
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tas2781_hda_unbind(struct device *dev,
|
|
struct device *master, void *master_data)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
struct hda_component *comps = master_data;
|
|
comps = &comps[tas_hda->priv->index];
|
|
|
|
if (comps->dev == dev) {
|
|
comps->dev = NULL;
|
|
memset(comps->name, 0, sizeof(comps->name));
|
|
comps->playback_hook = NULL;
|
|
}
|
|
|
|
tas2781_hda_remove_controls(tas_hda);
|
|
|
|
tasdevice_config_info_remove(tas_hda->priv);
|
|
tasdevice_dsp_remove(tas_hda->priv);
|
|
|
|
tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING;
|
|
}
|
|
|
|
static const struct component_ops tas2781_hda_comp_ops = {
|
|
.bind = tas2781_hda_bind,
|
|
.unbind = tas2781_hda_unbind,
|
|
};
|
|
|
|
static void tas2781_hda_remove(struct device *dev)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
|
|
pm_runtime_get_sync(tas_hda->dev);
|
|
pm_runtime_disable(tas_hda->dev);
|
|
|
|
component_del(tas_hda->dev, &tas2781_hda_comp_ops);
|
|
|
|
pm_runtime_put_noidle(tas_hda->dev);
|
|
|
|
tasdevice_remove(tas_hda->priv);
|
|
}
|
|
|
|
static int tas2781_hda_i2c_probe(struct i2c_client *clt)
|
|
{
|
|
struct tas2781_hda *tas_hda;
|
|
const char *device_name;
|
|
int ret;
|
|
|
|
|
|
tas_hda = devm_kzalloc(&clt->dev, sizeof(*tas_hda), GFP_KERNEL);
|
|
if (!tas_hda)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&clt->dev, tas_hda);
|
|
tas_hda->dev = &clt->dev;
|
|
|
|
tas_hda->priv = tasdevice_kzalloc(clt);
|
|
if (!tas_hda->priv)
|
|
return -ENOMEM;
|
|
|
|
if (strstr(dev_name(&clt->dev), "TIAS2781")) {
|
|
device_name = "TIAS2781";
|
|
tas_hda->priv->save_calibration = tas2781_save_calibration;
|
|
tas_hda->priv->apply_calibration = tas2781_apply_calib;
|
|
tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR;
|
|
} else if (strstr(dev_name(&clt->dev), "INT8866")) {
|
|
device_name = "INT8866";
|
|
tas_hda->priv->save_calibration = tas2563_save_calibration;
|
|
tas_hda->priv->apply_calibration = tas2563_apply_calib;
|
|
tas_hda->priv->global_addr = TAS2563_GLOBAL_ADDR;
|
|
} else
|
|
return -ENODEV;
|
|
|
|
tas_hda->priv->irq_info.irq = clt->irq;
|
|
ret = tas2781_read_acpi(tas_hda->priv, device_name);
|
|
if (ret)
|
|
return dev_err_probe(tas_hda->dev, ret,
|
|
"Platform not supported\n");
|
|
|
|
ret = tasdevice_init(tas_hda->priv);
|
|
if (ret)
|
|
goto err;
|
|
|
|
pm_runtime_set_autosuspend_delay(tas_hda->dev, 3000);
|
|
pm_runtime_use_autosuspend(tas_hda->dev);
|
|
pm_runtime_mark_last_busy(tas_hda->dev);
|
|
pm_runtime_set_active(tas_hda->dev);
|
|
pm_runtime_get_noresume(tas_hda->dev);
|
|
pm_runtime_enable(tas_hda->dev);
|
|
|
|
pm_runtime_put_autosuspend(tas_hda->dev);
|
|
|
|
tas2781_reset(tas_hda->priv);
|
|
|
|
ret = component_add(tas_hda->dev, &tas2781_hda_comp_ops);
|
|
if (ret) {
|
|
dev_err(tas_hda->dev, "Register component failed: %d\n", ret);
|
|
pm_runtime_disable(tas_hda->dev);
|
|
}
|
|
|
|
err:
|
|
if (ret)
|
|
tas2781_hda_remove(&clt->dev);
|
|
return ret;
|
|
}
|
|
|
|
static void tas2781_hda_i2c_remove(struct i2c_client *clt)
|
|
{
|
|
tas2781_hda_remove(&clt->dev);
|
|
}
|
|
|
|
static int tas2781_runtime_suspend(struct device *dev)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(tas_hda->dev, "Runtime Suspend\n");
|
|
|
|
mutex_lock(&tas_hda->priv->codec_lock);
|
|
|
|
/* The driver powers up the amplifiers at module load time.
|
|
* Stop the playback if it's unused.
|
|
*/
|
|
if (tas_hda->priv->playback_started) {
|
|
tasdevice_tuning_switch(tas_hda->priv, 1);
|
|
tas_hda->priv->playback_started = false;
|
|
}
|
|
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2781_runtime_resume(struct device *dev)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(tas_hda->dev, "Runtime Resume\n");
|
|
|
|
mutex_lock(&tas_hda->priv->codec_lock);
|
|
|
|
tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog);
|
|
|
|
/* If calibrated data occurs error, dsp will still works with default
|
|
* calibrated data inside algo.
|
|
*/
|
|
tasdevice_apply_calibration(tas_hda->priv);
|
|
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2781_system_suspend(struct device *dev)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(tas_hda->priv->dev, "System Suspend\n");
|
|
|
|
mutex_lock(&tas_hda->priv->codec_lock);
|
|
|
|
/* Shutdown chip before system suspend */
|
|
if (tas_hda->priv->playback_started)
|
|
tasdevice_tuning_switch(tas_hda->priv, 1);
|
|
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
|
|
/*
|
|
* Reset GPIO may be shared, so cannot reset here.
|
|
* However beyond this point, amps may be powered down.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int tas2781_system_resume(struct device *dev)
|
|
{
|
|
struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
|
|
int i;
|
|
|
|
dev_dbg(tas_hda->priv->dev, "System Resume\n");
|
|
|
|
mutex_lock(&tas_hda->priv->codec_lock);
|
|
|
|
for (i = 0; i < tas_hda->priv->ndev; i++) {
|
|
tas_hda->priv->tasdevice[i].cur_book = -1;
|
|
tas_hda->priv->tasdevice[i].cur_prog = -1;
|
|
tas_hda->priv->tasdevice[i].cur_conf = -1;
|
|
}
|
|
tas2781_reset(tas_hda->priv);
|
|
tasdevice_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog);
|
|
|
|
/* If calibrated data occurs error, dsp will still work with default
|
|
* calibrated data inside algo.
|
|
*/
|
|
tasdevice_apply_calibration(tas_hda->priv);
|
|
|
|
if (tas_hda->priv->playback_started)
|
|
tasdevice_tuning_switch(tas_hda->priv, 0);
|
|
|
|
mutex_unlock(&tas_hda->priv->codec_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops tas2781_hda_pm_ops = {
|
|
RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL)
|
|
SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume)
|
|
};
|
|
|
|
static const struct i2c_device_id tas2781_hda_i2c_id[] = {
|
|
{ "tas2781-hda", 0 },
|
|
{}
|
|
};
|
|
|
|
static const struct acpi_device_id tas2781_acpi_hda_match[] = {
|
|
{"TIAS2781", 0 },
|
|
{"INT8866", 0 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match);
|
|
|
|
static struct i2c_driver tas2781_hda_i2c_driver = {
|
|
.driver = {
|
|
.name = "tas2781-hda",
|
|
.acpi_match_table = tas2781_acpi_hda_match,
|
|
.pm = &tas2781_hda_pm_ops,
|
|
},
|
|
.id_table = tas2781_hda_i2c_id,
|
|
.probe = tas2781_hda_i2c_probe,
|
|
.remove = tas2781_hda_i2c_remove,
|
|
};
|
|
module_i2c_driver(tas2781_hda_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("TAS2781 HDA Driver");
|
|
MODULE_AUTHOR("Shenghao Ding, TI, <shenghao-ding@ti.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB);
|