349 lines
9.6 KiB
C
349 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Marvell GTI Watchdog driver
|
|
*
|
|
* Copyright (C) 2023 Marvell.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
/*
|
|
* Hardware supports following mode of operation:
|
|
* 1) Interrupt Only:
|
|
* This will generate the interrupt to arm core whenever timeout happens.
|
|
*
|
|
* 2) Interrupt + del3t (Interrupt to firmware (SCP processor)).
|
|
* This will generate interrupt to arm core on 1st timeout happens
|
|
* This will generate interrupt to SCP processor on 2nd timeout happens
|
|
*
|
|
* 3) Interrupt + Interrupt to SCP processor (called delt3t) + reboot.
|
|
* This will generate interrupt to arm core on 1st timeout happens
|
|
* Will generate interrupt to SCP processor on 2nd timeout happens,
|
|
* if interrupt is configured.
|
|
* Reboot on 3rd timeout.
|
|
*
|
|
* Driver will use hardware in mode-3 above so that system can reboot in case
|
|
* a hardware hang. Also h/w is configured not to generate SCP interrupt, so
|
|
* effectively 2nd timeout is ignored within hardware.
|
|
*
|
|
* First timeout is effectively watchdog pretimeout.
|
|
*/
|
|
|
|
/* GTI CWD Watchdog (GTI_CWD_WDOG) Register */
|
|
#define GTI_CWD_WDOG(reg_offset) (0x8 * (reg_offset))
|
|
#define GTI_CWD_WDOG_MODE_INT_DEL3T_RST 0x3
|
|
#define GTI_CWD_WDOG_MODE_MASK GENMASK_ULL(1, 0)
|
|
#define GTI_CWD_WDOG_LEN_SHIFT 4
|
|
#define GTI_CWD_WDOG_LEN_MASK GENMASK_ULL(19, 4)
|
|
#define GTI_CWD_WDOG_CNT_SHIFT 20
|
|
#define GTI_CWD_WDOG_CNT_MASK GENMASK_ULL(43, 20)
|
|
|
|
/* GTI CWD Watchdog Interrupt (GTI_CWD_INT) Register */
|
|
#define GTI_CWD_INT 0x200
|
|
#define GTI_CWD_INT_PENDING_STATUS(bit) BIT_ULL(bit)
|
|
|
|
/* GTI CWD Watchdog Interrupt Enable Clear (GTI_CWD_INT_ENA_CLR) Register */
|
|
#define GTI_CWD_INT_ENA_CLR 0x210
|
|
#define GTI_CWD_INT_ENA_CLR_VAL(bit) BIT_ULL(bit)
|
|
|
|
/* GTI CWD Watchdog Interrupt Enable Set (GTI_CWD_INT_ENA_SET) Register */
|
|
#define GTI_CWD_INT_ENA_SET 0x218
|
|
#define GTI_CWD_INT_ENA_SET_VAL(bit) BIT_ULL(bit)
|
|
|
|
/* GTI CWD Watchdog Poke (GTI_CWD_POKE) Registers */
|
|
#define GTI_CWD_POKE(reg_offset) (0x10000 + 0x8 * (reg_offset))
|
|
#define GTI_CWD_POKE_VAL 1
|
|
|
|
struct gti_match_data {
|
|
u32 gti_num_timers;
|
|
};
|
|
|
|
static const struct gti_match_data match_data_octeontx2 = {
|
|
.gti_num_timers = 54,
|
|
};
|
|
|
|
static const struct gti_match_data match_data_cn10k = {
|
|
.gti_num_timers = 64,
|
|
};
|
|
|
|
struct gti_wdt_priv {
|
|
struct watchdog_device wdev;
|
|
void __iomem *base;
|
|
u32 clock_freq;
|
|
struct clk *sclk;
|
|
/* wdt_timer_idx used for timer to be used for system watchdog */
|
|
u32 wdt_timer_idx;
|
|
const struct gti_match_data *data;
|
|
};
|
|
|
|
static irqreturn_t gti_wdt_interrupt(int irq, void *data)
|
|
{
|
|
struct watchdog_device *wdev = data;
|
|
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
|
|
/* Clear Interrupt Pending Status */
|
|
writeq(GTI_CWD_INT_PENDING_STATUS(priv->wdt_timer_idx),
|
|
priv->base + GTI_CWD_INT);
|
|
|
|
watchdog_notify_pretimeout(wdev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int gti_wdt_ping(struct watchdog_device *wdev)
|
|
{
|
|
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
|
|
writeq(GTI_CWD_POKE_VAL,
|
|
priv->base + GTI_CWD_POKE(priv->wdt_timer_idx));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gti_wdt_start(struct watchdog_device *wdev)
|
|
{
|
|
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
u64 regval;
|
|
|
|
if (!wdev->pretimeout)
|
|
return -EINVAL;
|
|
|
|
set_bit(WDOG_HW_RUNNING, &wdev->status);
|
|
|
|
/* Clear any pending interrupt */
|
|
writeq(GTI_CWD_INT_PENDING_STATUS(priv->wdt_timer_idx),
|
|
priv->base + GTI_CWD_INT);
|
|
|
|
/* Enable Interrupt */
|
|
writeq(GTI_CWD_INT_ENA_SET_VAL(priv->wdt_timer_idx),
|
|
priv->base + GTI_CWD_INT_ENA_SET);
|
|
|
|
/* Set (Interrupt + SCP interrupt (DEL3T) + core domain reset) Mode */
|
|
regval = readq(priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
|
|
regval |= GTI_CWD_WDOG_MODE_INT_DEL3T_RST;
|
|
writeq(regval, priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gti_wdt_stop(struct watchdog_device *wdev)
|
|
{
|
|
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
u64 regval;
|
|
|
|
/* Disable Interrupt */
|
|
writeq(GTI_CWD_INT_ENA_CLR_VAL(priv->wdt_timer_idx),
|
|
priv->base + GTI_CWD_INT_ENA_CLR);
|
|
|
|
/* Set GTI_CWD_WDOG.Mode = 0 to stop the timer */
|
|
regval = readq(priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
|
|
regval &= ~GTI_CWD_WDOG_MODE_MASK;
|
|
writeq(regval, priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gti_wdt_settimeout(struct watchdog_device *wdev,
|
|
unsigned int timeout)
|
|
{
|
|
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
u64 timeout_wdog, regval;
|
|
|
|
/* Update new timeout */
|
|
wdev->timeout = timeout;
|
|
|
|
/* Pretimeout is 1/3 of timeout */
|
|
wdev->pretimeout = timeout / 3;
|
|
|
|
/* Get clock cycles from pretimeout */
|
|
timeout_wdog = (u64)priv->clock_freq * wdev->pretimeout;
|
|
|
|
/* Watchdog counts in 1024 cycle steps */
|
|
timeout_wdog = timeout_wdog >> 10;
|
|
|
|
/* GTI_CWD_WDOG.CNT: reload counter is 16-bit */
|
|
timeout_wdog = (timeout_wdog + 0xff) >> 8;
|
|
if (timeout_wdog >= 0x10000)
|
|
timeout_wdog = 0xffff;
|
|
|
|
/*
|
|
* GTI_CWD_WDOG.LEN is 24bit, lower 8-bits should be zero and
|
|
* upper 16-bits are same as GTI_CWD_WDOG.CNT
|
|
*/
|
|
regval = readq(priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
|
|
regval &= GTI_CWD_WDOG_MODE_MASK;
|
|
regval |= (timeout_wdog << (GTI_CWD_WDOG_CNT_SHIFT + 8)) |
|
|
(timeout_wdog << GTI_CWD_WDOG_LEN_SHIFT);
|
|
writeq(regval, priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gti_wdt_set_pretimeout(struct watchdog_device *wdev,
|
|
unsigned int timeout)
|
|
{
|
|
struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
struct watchdog_device *wdog_dev = &priv->wdev;
|
|
|
|
if (!timeout) {
|
|
/* Disable Interrupt */
|
|
writeq(GTI_CWD_INT_ENA_CLR_VAL(priv->wdt_timer_idx),
|
|
priv->base + GTI_CWD_INT_ENA_CLR);
|
|
return 0;
|
|
}
|
|
|
|
/* pretimeout should 1/3 of max_timeout */
|
|
if (timeout * 3 <= wdog_dev->max_timeout)
|
|
return gti_wdt_settimeout(wdev, timeout * 3);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void gti_clk_disable_unprepare(void *data)
|
|
{
|
|
clk_disable_unprepare(data);
|
|
}
|
|
|
|
static int gti_wdt_get_cntfrq(struct platform_device *pdev,
|
|
struct gti_wdt_priv *priv)
|
|
{
|
|
int err;
|
|
|
|
priv->sclk = devm_clk_get_enabled(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->sclk))
|
|
return PTR_ERR(priv->sclk);
|
|
|
|
err = devm_add_action_or_reset(&pdev->dev,
|
|
gti_clk_disable_unprepare, priv->sclk);
|
|
if (err)
|
|
return err;
|
|
|
|
priv->clock_freq = clk_get_rate(priv->sclk);
|
|
if (!priv->clock_freq)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info gti_wdt_ident = {
|
|
.identity = "Marvell GTI watchdog",
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_PRETIMEOUT | WDIOF_KEEPALIVEPING |
|
|
WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
|
|
};
|
|
|
|
static const struct watchdog_ops gti_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = gti_wdt_start,
|
|
.stop = gti_wdt_stop,
|
|
.ping = gti_wdt_ping,
|
|
.set_timeout = gti_wdt_settimeout,
|
|
.set_pretimeout = gti_wdt_set_pretimeout,
|
|
};
|
|
|
|
static int gti_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct gti_wdt_priv *priv;
|
|
struct device *dev = &pdev->dev;
|
|
struct watchdog_device *wdog_dev;
|
|
u64 max_pretimeout;
|
|
u32 wdt_idx;
|
|
int irq;
|
|
int err;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->base))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(priv->base),
|
|
"reg property not valid/found\n");
|
|
|
|
err = gti_wdt_get_cntfrq(pdev, priv);
|
|
if (err)
|
|
return dev_err_probe(&pdev->dev, err,
|
|
"GTI clock frequency not valid/found");
|
|
|
|
priv->data = of_device_get_match_data(dev);
|
|
|
|
/* default use last timer for watchdog */
|
|
priv->wdt_timer_idx = priv->data->gti_num_timers - 1;
|
|
|
|
err = of_property_read_u32(dev->of_node, "marvell,wdt-timer-index",
|
|
&wdt_idx);
|
|
if (!err) {
|
|
if (wdt_idx >= priv->data->gti_num_timers)
|
|
return dev_err_probe(&pdev->dev, -EINVAL,
|
|
"GTI wdog timer index not valid");
|
|
|
|
priv->wdt_timer_idx = wdt_idx;
|
|
}
|
|
|
|
wdog_dev = &priv->wdev;
|
|
wdog_dev->info = >i_wdt_ident,
|
|
wdog_dev->ops = >i_wdt_ops,
|
|
wdog_dev->parent = dev;
|
|
/*
|
|
* Watchdog counter is 24 bit where lower 8 bits are zeros
|
|
* This counter decrements every 1024 clock cycles.
|
|
*/
|
|
max_pretimeout = (GTI_CWD_WDOG_CNT_MASK >> GTI_CWD_WDOG_CNT_SHIFT);
|
|
max_pretimeout &= ~0xFFUL;
|
|
max_pretimeout = (max_pretimeout * 1024) / priv->clock_freq;
|
|
wdog_dev->pretimeout = max_pretimeout;
|
|
|
|
/* Maximum timeout is 3 times the pretimeout */
|
|
wdog_dev->max_timeout = max_pretimeout * 3;
|
|
wdog_dev->max_hw_heartbeat_ms = max_pretimeout * 1000;
|
|
/* Minimum first timeout (pretimeout) is 1, so min_timeout as 3 */
|
|
wdog_dev->min_timeout = 3;
|
|
wdog_dev->timeout = wdog_dev->pretimeout;
|
|
|
|
watchdog_set_drvdata(wdog_dev, priv);
|
|
platform_set_drvdata(pdev, priv);
|
|
gti_wdt_settimeout(wdog_dev, wdog_dev->timeout);
|
|
watchdog_stop_on_reboot(wdog_dev);
|
|
watchdog_stop_on_unregister(wdog_dev);
|
|
|
|
err = devm_watchdog_register_device(dev, wdog_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
err = devm_request_irq(dev, irq, gti_wdt_interrupt, 0,
|
|
pdev->name, &priv->wdev);
|
|
if (err)
|
|
return dev_err_probe(dev, err, "Failed to register interrupt handler\n");
|
|
|
|
dev_info(dev, "Watchdog enabled (timeout=%d sec)\n", wdog_dev->timeout);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id gti_wdt_of_match[] = {
|
|
{ .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
|
|
{ .compatible = "marvell,cn10624-wdt", .data = &match_data_cn10k},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gti_wdt_of_match);
|
|
|
|
static struct platform_driver gti_wdt_driver = {
|
|
.driver = {
|
|
.name = "gti-wdt",
|
|
.of_match_table = gti_wdt_of_match,
|
|
},
|
|
.probe = gti_wdt_probe,
|
|
};
|
|
module_platform_driver(gti_wdt_driver);
|
|
|
|
MODULE_AUTHOR("Bharat Bhushan <bbhushan2@marvell.com>");
|
|
MODULE_DESCRIPTION("Marvell GTI watchdog driver");
|
|
MODULE_LICENSE("GPL");
|