1189 lines
36 KiB
C
1189 lines
36 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* CS42L43 core driver
|
|
*
|
|
* Copyright (C) 2022-2023 Cirrus Logic, Inc. and
|
|
* Cirrus Logic International Semiconductor Ltd.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/build_bug.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/cs42l43-regs.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/soundwire/sdw.h>
|
|
|
|
#include "cs42l43.h"
|
|
|
|
#define CS42L43_RESET_DELAY 20
|
|
|
|
#define CS42L43_SDW_ATTACH_TIMEOUT 500
|
|
#define CS42L43_SDW_DETACH_TIMEOUT 100
|
|
|
|
#define CS42L43_MCU_BOOT_STAGE1 1
|
|
#define CS42L43_MCU_BOOT_STAGE2 2
|
|
#define CS42L43_MCU_BOOT_STAGE3 3
|
|
#define CS42L43_MCU_BOOT_STAGE4 4
|
|
#define CS42L43_MCU_POLL 5000
|
|
#define CS42L43_MCU_CMD_TIMEOUT 20000
|
|
#define CS42L43_MCU_UPDATE_FORMAT 3
|
|
#define CS42L43_MCU_UPDATE_OFFSET 0x100000
|
|
#define CS42L43_MCU_UPDATE_TIMEOUT 500000
|
|
#define CS42L43_MCU_UPDATE_RETRIES 5
|
|
|
|
#define CS42L43_MCU_SUPPORTED_REV 0x2105
|
|
#define CS42L43_MCU_SHADOW_REGS_REQUIRED_REV 0x2200
|
|
#define CS42L43_MCU_SUPPORTED_BIOS_REV 0x0001
|
|
|
|
#define CS42L43_VDDP_DELAY 50
|
|
#define CS42L43_VDDD_DELAY 1000
|
|
|
|
#define CS42L43_AUTOSUSPEND_TIME 250
|
|
|
|
struct cs42l43_patch_header {
|
|
__le16 version;
|
|
__le16 size;
|
|
u8 reserved;
|
|
u8 secure;
|
|
__le16 bss_size;
|
|
__le32 apply_addr;
|
|
__le32 checksum;
|
|
__le32 sha;
|
|
__le16 swrev;
|
|
__le16 patchid;
|
|
__le16 ipxid;
|
|
__le16 romver;
|
|
__le32 load_addr;
|
|
} __packed;
|
|
|
|
static const struct reg_sequence cs42l43_reva_patch[] = {
|
|
{ 0x4000, 0x00000055 },
|
|
{ 0x4000, 0x000000AA },
|
|
{ 0x10084, 0x00000000 },
|
|
{ 0x1741C, 0x00CD2000 },
|
|
{ 0x1718C, 0x00000003 },
|
|
{ 0x4000, 0x00000000 },
|
|
{ CS42L43_CCM_BLK_CLK_CONTROL, 0x00000002 },
|
|
{ CS42L43_HPPATHVOL, 0x011B011B },
|
|
{ CS42L43_OSC_DIV_SEL, 0x00000001 },
|
|
{ CS42L43_DACCNFG2, 0x00000005 },
|
|
{ CS42L43_MIC_DETECT_CONTROL_ANDROID, 0x80790079 },
|
|
{ CS42L43_RELID, 0x0000000F },
|
|
};
|
|
|
|
const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = {
|
|
{ CS42L43_DRV_CTRL1, 0x000186C0 },
|
|
{ CS42L43_DRV_CTRL3, 0x286DB018 },
|
|
{ CS42L43_DRV_CTRL4, 0x000006D8 },
|
|
{ CS42L43_DRV_CTRL_5, 0x136C00C0 },
|
|
{ CS42L43_GPIO_CTRL1, 0x00000707 },
|
|
{ CS42L43_GPIO_CTRL2, 0x00000000 },
|
|
{ CS42L43_GPIO_FN_SEL, 0x00000004 },
|
|
{ CS42L43_MCLK_SRC_SEL, 0x00000000 },
|
|
{ CS42L43_SAMPLE_RATE1, 0x00000003 },
|
|
{ CS42L43_SAMPLE_RATE2, 0x00000003 },
|
|
{ CS42L43_SAMPLE_RATE3, 0x00000003 },
|
|
{ CS42L43_SAMPLE_RATE4, 0x00000003 },
|
|
{ CS42L43_PLL_CONTROL, 0x00000000 },
|
|
{ CS42L43_FS_SELECT1, 0x00000000 },
|
|
{ CS42L43_FS_SELECT2, 0x00000000 },
|
|
{ CS42L43_FS_SELECT3, 0x00000000 },
|
|
{ CS42L43_FS_SELECT4, 0x00000000 },
|
|
{ CS42L43_PDM_CONTROL, 0x00000000 },
|
|
{ CS42L43_ASP_CLK_CONFIG1, 0x00010001 },
|
|
{ CS42L43_ASP_CLK_CONFIG2, 0x00000000 },
|
|
{ CS42L43_OSC_DIV_SEL, 0x00000001 },
|
|
{ CS42L43_ADC_B_CTRL1, 0x00000000 },
|
|
{ CS42L43_ADC_B_CTRL2, 0x00000000 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL1, 0x00000001 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL2, 0x00000001 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL3, 0x00000001 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL4, 0x00000001 },
|
|
{ CS42L43_DMIC_PDM_CTRL, 0x00000000 },
|
|
{ CS42L43_DECIM_VOL_CTRL_CH1_CH2, 0x20122012 },
|
|
{ CS42L43_DECIM_VOL_CTRL_CH3_CH4, 0x20122012 },
|
|
{ CS42L43_INTP_VOLUME_CTRL1, 0x00000180 },
|
|
{ CS42L43_INTP_VOLUME_CTRL2, 0x00000180 },
|
|
{ CS42L43_AMP1_2_VOL_RAMP, 0x00000022 },
|
|
{ CS42L43_ASP_CTRL, 0x00000004 },
|
|
{ CS42L43_ASP_FSYNC_CTRL1, 0x000000FA },
|
|
{ CS42L43_ASP_FSYNC_CTRL2, 0x00000001 },
|
|
{ CS42L43_ASP_FSYNC_CTRL3, 0x00000000 },
|
|
{ CS42L43_ASP_FSYNC_CTRL4, 0x000001F4 },
|
|
{ CS42L43_ASP_DATA_CTRL, 0x0000003A },
|
|
{ CS42L43_ASP_RX_EN, 0x00000000 },
|
|
{ CS42L43_ASP_TX_EN, 0x00000000 },
|
|
{ CS42L43_ASP_RX_CH1_CTRL, 0x00170001 },
|
|
{ CS42L43_ASP_RX_CH2_CTRL, 0x00170031 },
|
|
{ CS42L43_ASP_RX_CH3_CTRL, 0x00170061 },
|
|
{ CS42L43_ASP_RX_CH4_CTRL, 0x00170091 },
|
|
{ CS42L43_ASP_RX_CH5_CTRL, 0x001700C1 },
|
|
{ CS42L43_ASP_RX_CH6_CTRL, 0x001700F1 },
|
|
{ CS42L43_ASP_TX_CH1_CTRL, 0x00170001 },
|
|
{ CS42L43_ASP_TX_CH2_CTRL, 0x00170031 },
|
|
{ CS42L43_ASP_TX_CH3_CTRL, 0x00170061 },
|
|
{ CS42L43_ASP_TX_CH4_CTRL, 0x00170091 },
|
|
{ CS42L43_ASP_TX_CH5_CTRL, 0x001700C1 },
|
|
{ CS42L43_ASP_TX_CH6_CTRL, 0x001700F1 },
|
|
{ CS42L43_ASPTX1_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX2_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX3_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX4_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX5_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX6_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH3_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH4_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP2_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP2_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP3_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP3_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP4_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP4_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_ASRC_INT1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_INT2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_INT3_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_INT4_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC3_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC4_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1INT1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1INT2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1DEC1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1DEC2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2INT1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2INT2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2DEC1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2DEC2_INPUT1, 0x00000000 },
|
|
{ CS42L43_EQ1MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_EQ1MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_EQ1MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_EQ1MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_SPDIF1_INPUT1, 0x00000000 },
|
|
{ CS42L43_SPDIF2_INPUT1, 0x00000000 },
|
|
{ CS42L43_AMP1MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP1MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP1MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP1MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_ASRC_INT_ENABLES, 0x00000100 },
|
|
{ CS42L43_ASRC_DEC_ENABLES, 0x00000100 },
|
|
{ CS42L43_PDNCNTL, 0x00000000 },
|
|
{ CS42L43_RINGSENSE_DEB_CTRL, 0x0000001B },
|
|
{ CS42L43_TIPSENSE_DEB_CTRL, 0x0000001B },
|
|
{ CS42L43_HS2, 0x050106F3 },
|
|
{ CS42L43_STEREO_MIC_CTRL, 0x00000000 },
|
|
{ CS42L43_STEREO_MIC_CLAMP_CTRL, 0x00000001 },
|
|
{ CS42L43_BLOCK_EN2, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN3, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN4, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN5, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN6, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN7, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN8, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN9, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN10, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN11, 0x00000000 },
|
|
{ CS42L43_TONE_CH1_CTRL, 0x00000000 },
|
|
{ CS42L43_TONE_CH2_CTRL, 0x00000000 },
|
|
{ CS42L43_MIC_DETECT_CONTROL_1, 0x00000003 },
|
|
{ CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, 0x02000003 },
|
|
{ CS42L43_MIC_DETECT_CONTROL_ANDROID, 0x80790079 },
|
|
{ CS42L43_ISRC1_CTRL, 0x00000000 },
|
|
{ CS42L43_ISRC2_CTRL, 0x00000000 },
|
|
{ CS42L43_CTRL_REG, 0x00000006 },
|
|
{ CS42L43_FDIV_FRAC, 0x40000000 },
|
|
{ CS42L43_CAL_RATIO, 0x00000080 },
|
|
{ CS42L43_SPI_CLK_CONFIG1, 0x00000001 },
|
|
{ CS42L43_SPI_CONFIG1, 0x00000000 },
|
|
{ CS42L43_SPI_CONFIG2, 0x00000000 },
|
|
{ CS42L43_SPI_CONFIG3, 0x00000001 },
|
|
{ CS42L43_SPI_CONFIG4, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG3, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG4, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG5, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG6, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG7, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG8, 0x00000000 },
|
|
{ CS42L43_DACCNFG1, 0x00000008 },
|
|
{ CS42L43_DACCNFG2, 0x00000005 },
|
|
{ CS42L43_HPPATHVOL, 0x011B011B },
|
|
{ CS42L43_PGAVOL, 0x00003470 },
|
|
{ CS42L43_LOADDETENA, 0x00000000 },
|
|
{ CS42L43_CTRL, 0x00000037 },
|
|
{ CS42L43_COEFF_DATA_IN0, 0x00000000 },
|
|
{ CS42L43_COEFF_RD_WR0, 0x00000000 },
|
|
{ CS42L43_START_EQZ0, 0x00000000 },
|
|
{ CS42L43_MUTE_EQ_IN0, 0x00000000 },
|
|
{ CS42L43_DECIM_MASK, 0x0000000F },
|
|
{ CS42L43_EQ_MIX_MASK, 0x0000000F },
|
|
{ CS42L43_ASP_MASK, 0x000000FF },
|
|
{ CS42L43_PLL_MASK, 0x00000003 },
|
|
{ CS42L43_SOFT_MASK, 0x0000FFFF },
|
|
{ CS42L43_SWIRE_MASK, 0x00007FFF },
|
|
{ CS42L43_MSM_MASK, 0x00000FFF },
|
|
{ CS42L43_ACC_DET_MASK, 0x00000FFF },
|
|
{ CS42L43_I2C_TGT_MASK, 0x00000003 },
|
|
{ CS42L43_SPI_MSTR_MASK, 0x00000007 },
|
|
{ CS42L43_SW_TO_SPI_BRIDGE_MASK, 0x00000001 },
|
|
{ CS42L43_OTP_MASK, 0x00000007 },
|
|
{ CS42L43_CLASS_D_AMP_MASK, 0x00003FFF },
|
|
{ CS42L43_GPIO_INT_MASK, 0x0000003F },
|
|
{ CS42L43_ASRC_MASK, 0x0000000F },
|
|
{ CS42L43_HPOUT_MASK, 0x00000003 },
|
|
};
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_reg_default, MFD_CS42L43);
|
|
|
|
bool cs42l43_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case CS42L43_DEVID:
|
|
case CS42L43_REVID:
|
|
case CS42L43_RELID:
|
|
case CS42L43_SFT_RESET:
|
|
case CS42L43_DRV_CTRL1:
|
|
case CS42L43_DRV_CTRL3:
|
|
case CS42L43_DRV_CTRL4:
|
|
case CS42L43_DRV_CTRL_5:
|
|
case CS42L43_GPIO_CTRL1:
|
|
case CS42L43_GPIO_CTRL2:
|
|
case CS42L43_GPIO_STS:
|
|
case CS42L43_GPIO_FN_SEL:
|
|
case CS42L43_MCLK_SRC_SEL:
|
|
case CS42L43_SAMPLE_RATE1 ... CS42L43_SAMPLE_RATE4:
|
|
case CS42L43_PLL_CONTROL:
|
|
case CS42L43_FS_SELECT1 ... CS42L43_FS_SELECT4:
|
|
case CS42L43_PDM_CONTROL:
|
|
case CS42L43_ASP_CLK_CONFIG1 ... CS42L43_ASP_CLK_CONFIG2:
|
|
case CS42L43_OSC_DIV_SEL:
|
|
case CS42L43_ADC_B_CTRL1 ... CS42L43_ADC_B_CTRL2:
|
|
case CS42L43_DECIM_HPF_WNF_CTRL1 ... CS42L43_DECIM_HPF_WNF_CTRL4:
|
|
case CS42L43_DMIC_PDM_CTRL:
|
|
case CS42L43_DECIM_VOL_CTRL_CH1_CH2 ... CS42L43_DECIM_VOL_CTRL_CH3_CH4:
|
|
case CS42L43_INTP_VOLUME_CTRL1 ... CS42L43_INTP_VOLUME_CTRL2:
|
|
case CS42L43_AMP1_2_VOL_RAMP:
|
|
case CS42L43_ASP_CTRL:
|
|
case CS42L43_ASP_FSYNC_CTRL1 ... CS42L43_ASP_FSYNC_CTRL4:
|
|
case CS42L43_ASP_DATA_CTRL:
|
|
case CS42L43_ASP_RX_EN ... CS42L43_ASP_TX_EN:
|
|
case CS42L43_ASP_RX_CH1_CTRL ... CS42L43_ASP_RX_CH6_CTRL:
|
|
case CS42L43_ASP_TX_CH1_CTRL ... CS42L43_ASP_TX_CH6_CTRL:
|
|
case CS42L43_OTP_REVISION_ID:
|
|
case CS42L43_ASPTX1_INPUT:
|
|
case CS42L43_ASPTX2_INPUT:
|
|
case CS42L43_ASPTX3_INPUT:
|
|
case CS42L43_ASPTX4_INPUT:
|
|
case CS42L43_ASPTX5_INPUT:
|
|
case CS42L43_ASPTX6_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH2_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH3_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH4_INPUT:
|
|
case CS42L43_SWIRE_DP2_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP2_CH2_INPUT:
|
|
case CS42L43_SWIRE_DP3_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP3_CH2_INPUT:
|
|
case CS42L43_SWIRE_DP4_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP4_CH2_INPUT:
|
|
case CS42L43_ASRC_INT1_INPUT1:
|
|
case CS42L43_ASRC_INT2_INPUT1:
|
|
case CS42L43_ASRC_INT3_INPUT1:
|
|
case CS42L43_ASRC_INT4_INPUT1:
|
|
case CS42L43_ASRC_DEC1_INPUT1:
|
|
case CS42L43_ASRC_DEC2_INPUT1:
|
|
case CS42L43_ASRC_DEC3_INPUT1:
|
|
case CS42L43_ASRC_DEC4_INPUT1:
|
|
case CS42L43_ISRC1INT1_INPUT1:
|
|
case CS42L43_ISRC1INT2_INPUT1:
|
|
case CS42L43_ISRC1DEC1_INPUT1:
|
|
case CS42L43_ISRC1DEC2_INPUT1:
|
|
case CS42L43_ISRC2INT1_INPUT1:
|
|
case CS42L43_ISRC2INT2_INPUT1:
|
|
case CS42L43_ISRC2DEC1_INPUT1:
|
|
case CS42L43_ISRC2DEC2_INPUT1:
|
|
case CS42L43_EQ1MIX_INPUT1 ... CS42L43_EQ1MIX_INPUT4:
|
|
case CS42L43_EQ2MIX_INPUT1 ... CS42L43_EQ2MIX_INPUT4:
|
|
case CS42L43_SPDIF1_INPUT1:
|
|
case CS42L43_SPDIF2_INPUT1:
|
|
case CS42L43_AMP1MIX_INPUT1 ... CS42L43_AMP1MIX_INPUT4:
|
|
case CS42L43_AMP2MIX_INPUT1 ... CS42L43_AMP2MIX_INPUT4:
|
|
case CS42L43_AMP3MIX_INPUT1 ... CS42L43_AMP3MIX_INPUT4:
|
|
case CS42L43_AMP4MIX_INPUT1 ... CS42L43_AMP4MIX_INPUT4:
|
|
case CS42L43_ASRC_INT_ENABLES ... CS42L43_ASRC_DEC_ENABLES:
|
|
case CS42L43_PDNCNTL:
|
|
case CS42L43_RINGSENSE_DEB_CTRL:
|
|
case CS42L43_TIPSENSE_DEB_CTRL:
|
|
case CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS:
|
|
case CS42L43_HS2:
|
|
case CS42L43_HS_STAT:
|
|
case CS42L43_MCU_SW_INTERRUPT:
|
|
case CS42L43_STEREO_MIC_CTRL:
|
|
case CS42L43_STEREO_MIC_CLAMP_CTRL:
|
|
case CS42L43_BLOCK_EN2 ... CS42L43_BLOCK_EN11:
|
|
case CS42L43_TONE_CH1_CTRL ... CS42L43_TONE_CH2_CTRL:
|
|
case CS42L43_MIC_DETECT_CONTROL_1:
|
|
case CS42L43_DETECT_STATUS_1:
|
|
case CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL:
|
|
case CS42L43_MIC_DETECT_CONTROL_ANDROID:
|
|
case CS42L43_ISRC1_CTRL:
|
|
case CS42L43_ISRC2_CTRL:
|
|
case CS42L43_CTRL_REG:
|
|
case CS42L43_FDIV_FRAC:
|
|
case CS42L43_CAL_RATIO:
|
|
case CS42L43_SPI_CLK_CONFIG1:
|
|
case CS42L43_SPI_CONFIG1 ... CS42L43_SPI_CONFIG4:
|
|
case CS42L43_SPI_STATUS1 ... CS42L43_SPI_STATUS2:
|
|
case CS42L43_TRAN_CONFIG1 ... CS42L43_TRAN_CONFIG8:
|
|
case CS42L43_TRAN_STATUS1 ... CS42L43_TRAN_STATUS3:
|
|
case CS42L43_TX_DATA:
|
|
case CS42L43_RX_DATA:
|
|
case CS42L43_DACCNFG1 ... CS42L43_DACCNFG2:
|
|
case CS42L43_HPPATHVOL:
|
|
case CS42L43_PGAVOL:
|
|
case CS42L43_LOADDETRESULTS:
|
|
case CS42L43_LOADDETENA:
|
|
case CS42L43_CTRL:
|
|
case CS42L43_COEFF_DATA_IN0:
|
|
case CS42L43_COEFF_RD_WR0:
|
|
case CS42L43_INIT_DONE0:
|
|
case CS42L43_START_EQZ0:
|
|
case CS42L43_MUTE_EQ_IN0:
|
|
case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT:
|
|
case CS42L43_DECIM_MASK ... CS42L43_HPOUT_MASK:
|
|
case CS42L43_DECIM_INT_SHADOW ... CS42L43_HP_OUT_SHADOW:
|
|
case CS42L43_BOOT_CONTROL:
|
|
case CS42L43_BLOCK_EN:
|
|
case CS42L43_SHUTTER_CONTROL:
|
|
case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_readable_register, MFD_CS42L43);
|
|
|
|
bool cs42l43_precious_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case CS42L43_SFT_RESET:
|
|
case CS42L43_TX_DATA:
|
|
case CS42L43_RX_DATA:
|
|
case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT:
|
|
case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_precious_register, MFD_CS42L43);
|
|
|
|
bool cs42l43_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case CS42L43_DEVID:
|
|
case CS42L43_REVID:
|
|
case CS42L43_RELID:
|
|
case CS42L43_GPIO_STS:
|
|
case CS42L43_OTP_REVISION_ID:
|
|
case CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS:
|
|
case CS42L43_HS_STAT:
|
|
case CS42L43_MCU_SW_INTERRUPT:
|
|
case CS42L43_DETECT_STATUS_1:
|
|
case CS42L43_SPI_STATUS1 ... CS42L43_SPI_STATUS2:
|
|
case CS42L43_TRAN_CONFIG1 ... CS42L43_TRAN_CONFIG2:
|
|
case CS42L43_TRAN_CONFIG8:
|
|
case CS42L43_TRAN_STATUS1 ... CS42L43_TRAN_STATUS3:
|
|
case CS42L43_LOADDETRESULTS:
|
|
case CS42L43_INIT_DONE0:
|
|
case CS42L43_DECIM_INT_SHADOW ... CS42L43_HP_OUT_SHADOW:
|
|
case CS42L43_BOOT_CONTROL:
|
|
case CS42L43_BLOCK_EN:
|
|
return true;
|
|
default:
|
|
return cs42l43_precious_register(dev, reg);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_volatile_register, MFD_CS42L43);
|
|
|
|
#define CS42L43_IRQ_OFFSET(reg) ((CS42L43_##reg##_INT) - CS42L43_DECIM_INT)
|
|
|
|
#define CS42L43_IRQ_REG(name, reg) REGMAP_IRQ_REG(CS42L43_##name, \
|
|
CS42L43_IRQ_OFFSET(reg), \
|
|
CS42L43_##name##_INT_MASK)
|
|
|
|
static const struct regmap_irq cs42l43_regmap_irqs[] = {
|
|
CS42L43_IRQ_REG(PLL_LOST_LOCK, PLL),
|
|
CS42L43_IRQ_REG(PLL_READY, PLL),
|
|
|
|
CS42L43_IRQ_REG(HP_STARTUP_DONE, MSM),
|
|
CS42L43_IRQ_REG(HP_SHUTDOWN_DONE, MSM),
|
|
CS42L43_IRQ_REG(HSDET_DONE, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_UNPLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_PLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_UNPLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_PLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_UNPLUG_PDET, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_PLUG_PDET, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_UNPLUG_PDET, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_PLUG_PDET, MSM),
|
|
|
|
CS42L43_IRQ_REG(HS2_BIAS_SENSE, ACC_DET),
|
|
CS42L43_IRQ_REG(HS1_BIAS_SENSE, ACC_DET),
|
|
CS42L43_IRQ_REG(DC_DETECT1_FALSE, ACC_DET),
|
|
CS42L43_IRQ_REG(DC_DETECT1_TRUE, ACC_DET),
|
|
CS42L43_IRQ_REG(HSBIAS_CLAMPED, ACC_DET),
|
|
CS42L43_IRQ_REG(HS3_4_BIAS_SENSE, ACC_DET),
|
|
|
|
CS42L43_IRQ_REG(AMP2_CLK_STOP_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_CLK_STOP_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_VDDSPK_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_VDDSPK_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_SHUTDOWN_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_SHUTDOWN_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_STARTUP_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_STARTUP_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_THERM_SHDN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_THERM_SHDN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_THERM_WARN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_THERM_WARN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_SCDET, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_SCDET, CLASS_D_AMP),
|
|
|
|
CS42L43_IRQ_REG(GPIO3_FALL, GPIO),
|
|
CS42L43_IRQ_REG(GPIO3_RISE, GPIO),
|
|
CS42L43_IRQ_REG(GPIO2_FALL, GPIO),
|
|
CS42L43_IRQ_REG(GPIO2_RISE, GPIO),
|
|
CS42L43_IRQ_REG(GPIO1_FALL, GPIO),
|
|
CS42L43_IRQ_REG(GPIO1_RISE, GPIO),
|
|
|
|
CS42L43_IRQ_REG(HP_ILIMIT, HPOUT),
|
|
CS42L43_IRQ_REG(HP_LOADDET_DONE, HPOUT),
|
|
};
|
|
|
|
static const struct regmap_irq_chip cs42l43_irq_chip = {
|
|
.name = "cs42l43",
|
|
|
|
.status_base = CS42L43_DECIM_INT,
|
|
.mask_base = CS42L43_DECIM_MASK,
|
|
.num_regs = 16,
|
|
|
|
.irqs = cs42l43_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(cs42l43_regmap_irqs),
|
|
|
|
.runtime_pm = true,
|
|
};
|
|
|
|
static const char * const cs42l43_core_supplies[] = {
|
|
"vdd-a", "vdd-io", "vdd-cp",
|
|
};
|
|
|
|
static const char * const cs42l43_parent_supplies[] = { "vdd-amp" };
|
|
|
|
static const struct mfd_cell cs42l43_devs[] = {
|
|
{ .name = "cs42l43-pinctrl", },
|
|
{ .name = "cs42l43-spi", },
|
|
{
|
|
.name = "cs42l43-codec",
|
|
.parent_supplies = cs42l43_parent_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(cs42l43_parent_supplies),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* If the device is connected over Soundwire, as well as soft resetting the
|
|
* device, this function will also way for the device to detach from the bus
|
|
* before returning.
|
|
*/
|
|
static int cs42l43_soft_reset(struct cs42l43 *cs42l43)
|
|
{
|
|
static const struct reg_sequence reset[] = {
|
|
{ CS42L43_SFT_RESET, CS42L43_SFT_RESET_VAL },
|
|
};
|
|
|
|
reinit_completion(&cs42l43->device_detach);
|
|
|
|
/*
|
|
* Apply cache only because the soft reset will cause the device to
|
|
* detach from the soundwire bus.
|
|
*/
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
regmap_multi_reg_write_bypassed(cs42l43->regmap, reset, ARRAY_SIZE(reset));
|
|
|
|
msleep(CS42L43_RESET_DELAY);
|
|
|
|
if (cs42l43->sdw) {
|
|
unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_DETACH_TIMEOUT);
|
|
unsigned long time;
|
|
|
|
time = wait_for_completion_timeout(&cs42l43->device_detach, timeout);
|
|
if (!time) {
|
|
dev_err(cs42l43->dev, "Timed out waiting for device detach\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* This function is essentially a no-op on I2C, but will wait for the device to
|
|
* attach when the device is used on a SoundWire bus.
|
|
*/
|
|
static int cs42l43_wait_for_attach(struct cs42l43 *cs42l43)
|
|
{
|
|
if (!cs42l43->attached) {
|
|
unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_ATTACH_TIMEOUT);
|
|
unsigned long time;
|
|
|
|
time = wait_for_completion_timeout(&cs42l43->device_attach, timeout);
|
|
if (!time) {
|
|
dev_err(cs42l43->dev, "Timed out waiting for device re-attach\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
regcache_cache_only(cs42l43->regmap, false);
|
|
|
|
/* The hardware requires enabling OSC_DIV before doing any SoundWire reads. */
|
|
if (cs42l43->sdw)
|
|
regmap_write(cs42l43->regmap, CS42L43_OSC_DIV_SEL,
|
|
CS42L43_OSC_DIV2_EN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function will advance the firmware into boot stage 3 from boot stage 2.
|
|
* Boot stage 3 is required to send commands to the firmware. This is achieved
|
|
* by setting the firmware NEED configuration register to zero, this indicates
|
|
* no configuration is required forcing the firmware to advance to boot stage 3.
|
|
*
|
|
* Later revisions of the firmware require the use of an alternative register
|
|
* for this purpose, which is indicated through the shadow flag.
|
|
*/
|
|
static int cs42l43_mcu_stage_2_3(struct cs42l43 *cs42l43, bool shadow)
|
|
{
|
|
unsigned int need_reg = CS42L43_NEED_CONFIGS;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (shadow)
|
|
need_reg = CS42L43_FW_SH_BOOT_CFG_NEED_CONFIGS;
|
|
|
|
regmap_write(cs42l43->regmap, need_reg, 0);
|
|
|
|
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_BOOT_STATUS,
|
|
val, (val == CS42L43_MCU_BOOT_STAGE3),
|
|
CS42L43_MCU_POLL, CS42L43_MCU_CMD_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to move to stage 3: %d, 0x%x\n", ret, val);
|
|
return ret;
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* This function will return the firmware to boot stage 2 from boot stage 3.
|
|
* Boot stage 2 is required to apply updates to the firmware. This is achieved
|
|
* by setting the firmware NEED configuration register to FW_PATCH_NEED_CFG,
|
|
* setting the HAVE configuration register to 0, and soft resetting. The
|
|
* firmware will see it is missing a patch configuration and will pause in boot
|
|
* stage 2.
|
|
*
|
|
* Note: Unlike cs42l43_mcu_stage_2_3 there is no need to consider the shadow
|
|
* register here as the driver will only return to boot stage 2 if the firmware
|
|
* requires update which means the revision does not include shadow register
|
|
* support.
|
|
*/
|
|
static int cs42l43_mcu_stage_3_2(struct cs42l43 *cs42l43)
|
|
{
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_NEED_CONFIGS,
|
|
CS42L43_FW_PATCH_NEED_CFG_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_HAVE_CONFIGS, 0);
|
|
|
|
return cs42l43_soft_reset(cs42l43);
|
|
}
|
|
|
|
/*
|
|
* Disable the firmware running on the device such that the driver can access
|
|
* the registers without fear of the MCU changing them under it.
|
|
*/
|
|
static int cs42l43_mcu_disable(struct cs42l43 *cs42l43)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_REG,
|
|
CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_DISABLE_VAL);
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_MM_CTRL_SELECTION,
|
|
CS42L43_FW_MM_CTRL_MCU_SEL_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_CONTROL_IND_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0);
|
|
|
|
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
|
|
(val & CS42L43_CONTROL_APPLIED_INT_MASK),
|
|
CS42L43_MCU_POLL, CS42L43_MCU_CMD_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable firmware: %d, 0x%x\n", ret, val);
|
|
return ret;
|
|
}
|
|
|
|
/* Soft reset to clear any register state the firmware left behind. */
|
|
return cs42l43_soft_reset(cs42l43);
|
|
}
|
|
|
|
/*
|
|
* Callback to load firmware updates.
|
|
*/
|
|
static void cs42l43_mcu_load_firmware(const struct firmware *firmware, void *context)
|
|
{
|
|
struct cs42l43 *cs42l43 = context;
|
|
const struct cs42l43_patch_header *hdr;
|
|
unsigned int loadaddr, val;
|
|
int ret;
|
|
|
|
if (!firmware) {
|
|
dev_err(cs42l43->dev, "Failed to load firmware\n");
|
|
cs42l43->firmware_error = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
hdr = (const struct cs42l43_patch_header *)&firmware->data[0];
|
|
loadaddr = le32_to_cpu(hdr->load_addr);
|
|
|
|
if (le16_to_cpu(hdr->version) != CS42L43_MCU_UPDATE_FORMAT) {
|
|
dev_err(cs42l43->dev, "Bad firmware file format: %d\n", hdr->version);
|
|
cs42l43->firmware_error = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
|
|
regmap_write(cs42l43->regmap, CS42L43_PATCH_START_ADDR, loadaddr);
|
|
regmap_bulk_write(cs42l43->regmap, loadaddr + CS42L43_MCU_UPDATE_OFFSET,
|
|
&firmware->data[0], firmware->size / sizeof(u32));
|
|
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_PATCH_IND_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0);
|
|
|
|
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
|
|
(val & CS42L43_PATCH_APPLIED_INT_MASK),
|
|
CS42L43_MCU_POLL, CS42L43_MCU_UPDATE_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to update firmware: %d, 0x%x\n", ret, val);
|
|
cs42l43->firmware_error = ret;
|
|
goto err_release;
|
|
}
|
|
|
|
err_release:
|
|
release_firmware(firmware);
|
|
err:
|
|
complete(&cs42l43->firmware_download);
|
|
}
|
|
|
|
/*
|
|
* The process of updating the firmware is split into a series of steps, at the
|
|
* end of each step a soft reset of the device might be required which will
|
|
* require the driver to wait for the device to re-attach on the SoundWire bus,
|
|
* if that control bus is being used.
|
|
*/
|
|
static int cs42l43_mcu_update_step(struct cs42l43 *cs42l43)
|
|
{
|
|
unsigned int mcu_rev, bios_rev, boot_status, secure_cfg;
|
|
bool patched, shadow;
|
|
int ret;
|
|
|
|
/* Clear any stale software interrupt bits. */
|
|
regmap_read(cs42l43->regmap, CS42L43_SOFT_INT, &mcu_rev);
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_STATUS, &boot_status);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read boot status: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_MCU_SW_REV, &mcu_rev);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read firmware revision: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
bios_rev = (((mcu_rev & CS42L43_BIOS_MAJOR_REV_MASK) << 12) |
|
|
((mcu_rev & CS42L43_BIOS_MINOR_REV_MASK) << 4) |
|
|
((mcu_rev & CS42L43_BIOS_SUBMINOR_REV_MASK) >> 8)) >>
|
|
CS42L43_BIOS_MAJOR_REV_SHIFT;
|
|
mcu_rev = ((mcu_rev & CS42L43_FW_MAJOR_REV_MASK) << 12) |
|
|
((mcu_rev & CS42L43_FW_MINOR_REV_MASK) << 4) |
|
|
((mcu_rev & CS42L43_FW_SUBMINOR_REV_MASK) >> 8);
|
|
|
|
/*
|
|
* The firmware has two revision numbers bringing either of them up to a
|
|
* supported version will provide the features the driver requires.
|
|
*/
|
|
patched = mcu_rev >= CS42L43_MCU_SUPPORTED_REV ||
|
|
bios_rev >= CS42L43_MCU_SUPPORTED_BIOS_REV;
|
|
/*
|
|
* Later versions of the firmwware require the driver to access some
|
|
* features through a set of shadow registers.
|
|
*/
|
|
shadow = mcu_rev >= CS42L43_MCU_SHADOW_REGS_REQUIRED_REV;
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_CONTROL, &secure_cfg);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read security settings: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
cs42l43->hw_lock = secure_cfg & CS42L43_LOCK_HW_STS_MASK;
|
|
|
|
if (!patched && cs42l43->hw_lock) {
|
|
dev_err(cs42l43->dev, "Unpatched secure device\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
dev_dbg(cs42l43->dev, "Firmware(0x%x, 0x%x) in boot stage %d\n",
|
|
mcu_rev, bios_rev, boot_status);
|
|
|
|
switch (boot_status) {
|
|
case CS42L43_MCU_BOOT_STAGE2:
|
|
if (!patched) {
|
|
ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
|
|
"cs42l43.bin", cs42l43->dev,
|
|
GFP_KERNEL, cs42l43,
|
|
cs42l43_mcu_load_firmware);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to request firmware: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
wait_for_completion(&cs42l43->firmware_download);
|
|
|
|
if (cs42l43->firmware_error)
|
|
return cs42l43->firmware_error;
|
|
|
|
return -EAGAIN;
|
|
} else {
|
|
return cs42l43_mcu_stage_2_3(cs42l43, shadow);
|
|
}
|
|
case CS42L43_MCU_BOOT_STAGE3:
|
|
if (patched)
|
|
return cs42l43_mcu_disable(cs42l43);
|
|
else
|
|
return cs42l43_mcu_stage_3_2(cs42l43);
|
|
case CS42L43_MCU_BOOT_STAGE4:
|
|
return 0;
|
|
default:
|
|
dev_err(cs42l43->dev, "Invalid boot status: %d\n", boot_status);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Update the firmware running on the device.
|
|
*/
|
|
static int cs42l43_mcu_update(struct cs42l43 *cs42l43)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < CS42L43_MCU_UPDATE_RETRIES; i++) {
|
|
ret = cs42l43_mcu_update_step(cs42l43);
|
|
if (ret != -EAGAIN)
|
|
return ret;
|
|
|
|
ret = cs42l43_wait_for_attach(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
dev_err(cs42l43->dev, "Failed retrying update\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int cs42l43_irq_config(struct cs42l43 *cs42l43)
|
|
{
|
|
struct irq_data *irq_data;
|
|
unsigned long irq_flags;
|
|
int ret;
|
|
|
|
if (cs42l43->sdw)
|
|
cs42l43->irq = cs42l43->sdw->irq;
|
|
|
|
cs42l43->irq_chip = cs42l43_irq_chip;
|
|
cs42l43->irq_chip.irq_drv_data = cs42l43;
|
|
|
|
irq_data = irq_get_irq_data(cs42l43->irq);
|
|
if (!irq_data) {
|
|
dev_err(cs42l43->dev, "Invalid IRQ: %d\n", cs42l43->irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq_flags = irqd_get_trigger_type(irq_data);
|
|
switch (irq_flags) {
|
|
case IRQF_TRIGGER_LOW:
|
|
case IRQF_TRIGGER_HIGH:
|
|
case IRQF_TRIGGER_RISING:
|
|
case IRQF_TRIGGER_FALLING:
|
|
break;
|
|
case IRQ_TYPE_NONE:
|
|
default:
|
|
irq_flags = IRQF_TRIGGER_LOW;
|
|
break;
|
|
}
|
|
|
|
irq_flags |= IRQF_ONESHOT;
|
|
|
|
ret = devm_regmap_add_irq_chip(cs42l43->dev, cs42l43->regmap,
|
|
cs42l43->irq, irq_flags, 0,
|
|
&cs42l43->irq_chip, &cs42l43->irq_data);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to add IRQ chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(cs42l43->dev, "Configured IRQ %d with flags 0x%lx\n",
|
|
cs42l43->irq, irq_flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cs42l43_boot_work(struct work_struct *work)
|
|
{
|
|
struct cs42l43 *cs42l43 = container_of(work, struct cs42l43, boot_work);
|
|
unsigned int devid, revid, otp;
|
|
int ret;
|
|
|
|
ret = cs42l43_wait_for_attach(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_DEVID, &devid);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read devid: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
switch (devid) {
|
|
case CS42L43_DEVID_VAL:
|
|
break;
|
|
default:
|
|
dev_err(cs42l43->dev, "Unrecognised devid: 0x%06x\n", devid);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_REVID, &revid);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read rev: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_OTP_REVISION_ID, &otp);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read otp rev: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(cs42l43->dev,
|
|
"devid: 0x%06x, rev: 0x%02x, otp: 0x%02x\n", devid, revid, otp);
|
|
|
|
ret = cs42l43_mcu_update(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
|
|
ARRAY_SIZE(cs42l43_reva_patch));
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = cs42l43_irq_config(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
|
|
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),
|
|
NULL, 0, NULL);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to add subdevices: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(cs42l43->dev);
|
|
pm_runtime_put_autosuspend(cs42l43->dev);
|
|
|
|
return;
|
|
|
|
err:
|
|
pm_runtime_put_sync(cs42l43->dev);
|
|
cs42l43_dev_remove(cs42l43);
|
|
}
|
|
|
|
static int cs42l43_power_up(struct cs42l43 *cs42l43)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_enable(cs42l43->vdd_p);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to enable vdd-p: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* vdd-p must be on for 50uS before any other supply */
|
|
usleep_range(CS42L43_VDDP_DELAY, 2 * CS42L43_VDDP_DELAY);
|
|
|
|
gpiod_set_value_cansleep(cs42l43->reset, 1);
|
|
|
|
ret = regulator_bulk_enable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to enable core supplies: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
ret = regulator_enable(cs42l43->vdd_d);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to enable vdd-d: %d\n", ret);
|
|
goto err_core_supplies;
|
|
}
|
|
|
|
usleep_range(CS42L43_VDDD_DELAY, 2 * CS42L43_VDDD_DELAY);
|
|
|
|
return 0;
|
|
|
|
err_core_supplies:
|
|
regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
|
|
err_reset:
|
|
gpiod_set_value_cansleep(cs42l43->reset, 0);
|
|
regulator_disable(cs42l43->vdd_p);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cs42l43_power_down(struct cs42l43 *cs42l43)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_disable(cs42l43->vdd_d);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable vdd-d: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable core supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(cs42l43->reset, 0);
|
|
|
|
ret = regulator_disable(cs42l43->vdd_p);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable vdd-p: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cs42l43_dev_probe(struct cs42l43 *cs42l43)
|
|
{
|
|
int i, ret;
|
|
|
|
dev_set_drvdata(cs42l43->dev, cs42l43);
|
|
|
|
mutex_init(&cs42l43->pll_lock);
|
|
init_completion(&cs42l43->device_attach);
|
|
init_completion(&cs42l43->device_detach);
|
|
init_completion(&cs42l43->firmware_download);
|
|
INIT_WORK(&cs42l43->boot_work, cs42l43_boot_work);
|
|
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
|
|
cs42l43->reset = devm_gpiod_get_optional(cs42l43->dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(cs42l43->reset))
|
|
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->reset),
|
|
"Failed to get reset\n");
|
|
|
|
cs42l43->vdd_p = devm_regulator_get(cs42l43->dev, "vdd-p");
|
|
if (IS_ERR(cs42l43->vdd_p))
|
|
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->vdd_p),
|
|
"Failed to get vdd-p\n");
|
|
|
|
cs42l43->vdd_d = devm_regulator_get(cs42l43->dev, "vdd-d");
|
|
if (IS_ERR(cs42l43->vdd_d))
|
|
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->vdd_d),
|
|
"Failed to get vdd-d\n");
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(cs42l43_core_supplies) != CS42L43_N_SUPPLIES);
|
|
|
|
for (i = 0; i < CS42L43_N_SUPPLIES; i++)
|
|
cs42l43->core_supplies[i].supply = cs42l43_core_supplies[i];
|
|
|
|
ret = devm_regulator_bulk_get(cs42l43->dev, CS42L43_N_SUPPLIES,
|
|
cs42l43->core_supplies);
|
|
if (ret)
|
|
return dev_err_probe(cs42l43->dev, ret,
|
|
"Failed to get core supplies\n");
|
|
|
|
ret = cs42l43_power_up(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_set_autosuspend_delay(cs42l43->dev, CS42L43_AUTOSUSPEND_TIME);
|
|
pm_runtime_use_autosuspend(cs42l43->dev);
|
|
pm_runtime_set_active(cs42l43->dev);
|
|
/*
|
|
* The device is already powered up, but keep it from suspending until
|
|
* the boot work runs.
|
|
*/
|
|
pm_runtime_get_noresume(cs42l43->dev);
|
|
devm_pm_runtime_enable(cs42l43->dev);
|
|
|
|
queue_work(system_long_wq, &cs42l43->boot_work);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_dev_probe, MFD_CS42L43);
|
|
|
|
void cs42l43_dev_remove(struct cs42l43 *cs42l43)
|
|
{
|
|
cs42l43_power_down(cs42l43);
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_dev_remove, MFD_CS42L43);
|
|
|
|
static int cs42l43_suspend(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/*
|
|
* Don't care about being resumed here, but the driver does want
|
|
* force_resume to always trigger an actual resume, so that register
|
|
* state for the MCU/GPIOs is returned as soon as possible after system
|
|
* resume. force_resume will resume if the reference count is resumed on
|
|
* suspend hence the get_noresume.
|
|
*/
|
|
pm_runtime_get_noresume(dev);
|
|
|
|
ret = pm_runtime_force_suspend(dev);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to force suspend: %d\n", ret);
|
|
pm_runtime_put_noidle(dev);
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_put_noidle(dev);
|
|
|
|
ret = cs42l43_power_down(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs42l43_resume(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = cs42l43_power_up(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pm_runtime_force_resume(dev);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to force resume: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs42l43_runtime_suspend(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
|
|
/*
|
|
* Whilst the driver doesn't power the chip down here, going into runtime
|
|
* suspend lets the SoundWire bus power down, which means the driver
|
|
* can't communicate with the device any more.
|
|
*/
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs42l43_runtime_resume(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
unsigned int reset_canary;
|
|
int ret;
|
|
|
|
ret = cs42l43_wait_for_attach(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_RELID, &reset_canary);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to check reset canary: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
if (!reset_canary) {
|
|
/*
|
|
* If the canary has cleared the chip has reset, re-handle the
|
|
* MCU and mark the cache as dirty to indicate the chip reset.
|
|
*/
|
|
ret = cs42l43_mcu_update(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
regcache_mark_dirty(cs42l43->regmap);
|
|
}
|
|
|
|
ret = regcache_sync(cs42l43->regmap);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to restore register cache: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_NS_GPL_DEV_PM_OPS(cs42l43_pm_ops, MFD_CS42L43) = {
|
|
SYSTEM_SLEEP_PM_OPS(cs42l43_suspend, cs42l43_resume)
|
|
RUNTIME_PM_OPS(cs42l43_runtime_suspend, cs42l43_runtime_resume, NULL)
|
|
};
|
|
|
|
MODULE_DESCRIPTION("CS42L43 Core Driver");
|
|
MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE("cs42l43.bin");
|