691 lines
16 KiB
C
691 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Support for the FTS Systemmonitoring Chip "Teutates"
|
|
*
|
|
* Copyright (C) 2016 Fujitsu Technology Solutions GmbH,
|
|
* Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/math.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define FTS_DEVICE_ID_REG 0x0000
|
|
#define FTS_DEVICE_REVISION_REG 0x0001
|
|
#define FTS_DEVICE_STATUS_REG 0x0004
|
|
#define FTS_SATELLITE_STATUS_REG 0x0005
|
|
#define FTS_EVENT_STATUS_REG 0x0006
|
|
#define FTS_GLOBAL_CONTROL_REG 0x0007
|
|
|
|
#define FTS_DEVICE_DETECT_REG_1 0x0C
|
|
#define FTS_DEVICE_DETECT_REG_2 0x0D
|
|
#define FTS_DEVICE_DETECT_REG_3 0x0E
|
|
|
|
#define FTS_SENSOR_EVENT_REG 0x0010
|
|
|
|
#define FTS_FAN_EVENT_REG 0x0014
|
|
#define FTS_FAN_PRESENT_REG 0x0015
|
|
|
|
#define FTS_POWER_ON_TIME_COUNTER_A 0x007A
|
|
#define FTS_POWER_ON_TIME_COUNTER_B 0x007B
|
|
#define FTS_POWER_ON_TIME_COUNTER_C 0x007C
|
|
|
|
#define FTS_PAGE_SELECT_REG 0x007F
|
|
|
|
#define FTS_WATCHDOG_TIME_PRESET 0x000B
|
|
#define FTS_WATCHDOG_CONTROL 0x5081
|
|
|
|
#define FTS_NO_FAN_SENSORS 0x08
|
|
#define FTS_NO_TEMP_SENSORS 0x10
|
|
#define FTS_NO_VOLT_SENSORS 0x04
|
|
|
|
#define FTS_FAN_SOURCE_INVALID 0xff
|
|
|
|
static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
|
|
|
|
static const struct i2c_device_id fts_id[] = {
|
|
{ "ftsteutates", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, fts_id);
|
|
|
|
enum WATCHDOG_RESOLUTION {
|
|
seconds = 1,
|
|
minutes = 60
|
|
};
|
|
|
|
struct fts_data {
|
|
struct i2c_client *client;
|
|
/* update sensor data lock */
|
|
struct mutex update_lock;
|
|
/* read/write register lock */
|
|
struct mutex access_lock;
|
|
unsigned long last_updated; /* in jiffies */
|
|
struct watchdog_device wdd;
|
|
enum WATCHDOG_RESOLUTION resolution;
|
|
bool valid; /* false until following fields are valid */
|
|
|
|
u8 volt[FTS_NO_VOLT_SENSORS];
|
|
|
|
u8 temp_input[FTS_NO_TEMP_SENSORS];
|
|
u8 temp_alarm;
|
|
|
|
u8 fan_present;
|
|
u8 fan_input[FTS_NO_FAN_SENSORS]; /* in rps */
|
|
u8 fan_source[FTS_NO_FAN_SENSORS];
|
|
u8 fan_alarm;
|
|
};
|
|
|
|
#define FTS_REG_FAN_INPUT(idx) ((idx) + 0x20)
|
|
#define FTS_REG_FAN_SOURCE(idx) ((idx) + 0x30)
|
|
#define FTS_REG_FAN_CONTROL(idx) (((idx) << 16) + 0x4881)
|
|
|
|
#define FTS_REG_TEMP_INPUT(idx) ((idx) + 0x40)
|
|
#define FTS_REG_TEMP_CONTROL(idx) (((idx) << 16) + 0x0681)
|
|
|
|
#define FTS_REG_VOLT(idx) ((idx) + 0x18)
|
|
|
|
/*****************************************************************************/
|
|
/* I2C Helper functions */
|
|
/*****************************************************************************/
|
|
static int fts_read_byte(struct i2c_client *client, unsigned short reg)
|
|
{
|
|
int ret;
|
|
unsigned char page = reg >> 8;
|
|
struct fts_data *data = dev_get_drvdata(&client->dev);
|
|
|
|
mutex_lock(&data->access_lock);
|
|
|
|
dev_dbg(&client->dev, "page select - page: 0x%.02x\n", page);
|
|
ret = i2c_smbus_write_byte_data(client, FTS_PAGE_SELECT_REG, page);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
reg &= 0xFF;
|
|
ret = i2c_smbus_read_byte_data(client, reg);
|
|
dev_dbg(&client->dev, "read - reg: 0x%.02x: val: 0x%.02x\n", reg, ret);
|
|
|
|
error:
|
|
mutex_unlock(&data->access_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int fts_write_byte(struct i2c_client *client, unsigned short reg,
|
|
unsigned char value)
|
|
{
|
|
int ret;
|
|
unsigned char page = reg >> 8;
|
|
struct fts_data *data = dev_get_drvdata(&client->dev);
|
|
|
|
mutex_lock(&data->access_lock);
|
|
|
|
dev_dbg(&client->dev, "page select - page: 0x%.02x\n", page);
|
|
ret = i2c_smbus_write_byte_data(client, FTS_PAGE_SELECT_REG, page);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
reg &= 0xFF;
|
|
dev_dbg(&client->dev,
|
|
"write - reg: 0x%.02x: val: 0x%.02x\n", reg, value);
|
|
ret = i2c_smbus_write_byte_data(client, reg, value);
|
|
|
|
error:
|
|
mutex_unlock(&data->access_lock);
|
|
return ret;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* Data Updater Helper function */
|
|
/*****************************************************************************/
|
|
static int fts_update_device(struct fts_data *data)
|
|
{
|
|
int i;
|
|
int err = 0;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
if (!time_after(jiffies, data->last_updated + 2 * HZ) && data->valid)
|
|
goto exit;
|
|
|
|
err = fts_read_byte(data->client, FTS_DEVICE_STATUS_REG);
|
|
if (err < 0)
|
|
goto exit;
|
|
|
|
data->valid = !!(err & 0x02); /* Data not ready yet */
|
|
if (unlikely(!data->valid)) {
|
|
err = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
|
|
err = fts_read_byte(data->client, FTS_FAN_PRESENT_REG);
|
|
if (err < 0)
|
|
goto exit;
|
|
data->fan_present = err;
|
|
|
|
err = fts_read_byte(data->client, FTS_FAN_EVENT_REG);
|
|
if (err < 0)
|
|
goto exit;
|
|
data->fan_alarm = err;
|
|
|
|
for (i = 0; i < FTS_NO_FAN_SENSORS; i++) {
|
|
if (data->fan_present & BIT(i)) {
|
|
err = fts_read_byte(data->client, FTS_REG_FAN_INPUT(i));
|
|
if (err < 0)
|
|
goto exit;
|
|
data->fan_input[i] = err;
|
|
|
|
err = fts_read_byte(data->client,
|
|
FTS_REG_FAN_SOURCE(i));
|
|
if (err < 0)
|
|
goto exit;
|
|
data->fan_source[i] = err;
|
|
} else {
|
|
data->fan_input[i] = 0;
|
|
data->fan_source[i] = FTS_FAN_SOURCE_INVALID;
|
|
}
|
|
}
|
|
|
|
err = fts_read_byte(data->client, FTS_SENSOR_EVENT_REG);
|
|
if (err < 0)
|
|
goto exit;
|
|
data->temp_alarm = err;
|
|
|
|
for (i = 0; i < FTS_NO_TEMP_SENSORS; i++) {
|
|
err = fts_read_byte(data->client, FTS_REG_TEMP_INPUT(i));
|
|
if (err < 0)
|
|
goto exit;
|
|
data->temp_input[i] = err;
|
|
}
|
|
|
|
for (i = 0; i < FTS_NO_VOLT_SENSORS; i++) {
|
|
err = fts_read_byte(data->client, FTS_REG_VOLT(i));
|
|
if (err < 0)
|
|
goto exit;
|
|
data->volt[i] = err;
|
|
}
|
|
data->last_updated = jiffies;
|
|
err = 0;
|
|
exit:
|
|
mutex_unlock(&data->update_lock);
|
|
return err;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* Watchdog functions */
|
|
/*****************************************************************************/
|
|
static int fts_wd_set_resolution(struct fts_data *data,
|
|
enum WATCHDOG_RESOLUTION resolution)
|
|
{
|
|
int ret;
|
|
|
|
if (data->resolution == resolution)
|
|
return 0;
|
|
|
|
ret = fts_read_byte(data->client, FTS_WATCHDOG_CONTROL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((resolution == seconds && ret & BIT(1)) ||
|
|
(resolution == minutes && (ret & BIT(1)) == 0)) {
|
|
data->resolution = resolution;
|
|
return 0;
|
|
}
|
|
|
|
if (resolution == seconds)
|
|
ret |= BIT(1);
|
|
else
|
|
ret &= ~BIT(1);
|
|
|
|
ret = fts_write_byte(data->client, FTS_WATCHDOG_CONTROL, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->resolution = resolution;
|
|
return ret;
|
|
}
|
|
|
|
static int fts_wd_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
|
|
{
|
|
struct fts_data *data;
|
|
enum WATCHDOG_RESOLUTION resolution = seconds;
|
|
int ret;
|
|
|
|
data = watchdog_get_drvdata(wdd);
|
|
/* switch watchdog resolution to minutes if timeout does not fit
|
|
* into a byte
|
|
*/
|
|
if (timeout > 0xFF) {
|
|
timeout = DIV_ROUND_UP(timeout, 60) * 60;
|
|
resolution = minutes;
|
|
}
|
|
|
|
ret = fts_wd_set_resolution(data, resolution);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
wdd->timeout = timeout;
|
|
return 0;
|
|
}
|
|
|
|
static int fts_wd_start(struct watchdog_device *wdd)
|
|
{
|
|
struct fts_data *data = watchdog_get_drvdata(wdd);
|
|
|
|
return fts_write_byte(data->client, FTS_WATCHDOG_TIME_PRESET,
|
|
wdd->timeout / (u8)data->resolution);
|
|
}
|
|
|
|
static int fts_wd_stop(struct watchdog_device *wdd)
|
|
{
|
|
struct fts_data *data;
|
|
|
|
data = watchdog_get_drvdata(wdd);
|
|
return fts_write_byte(data->client, FTS_WATCHDOG_TIME_PRESET, 0);
|
|
}
|
|
|
|
static const struct watchdog_info fts_wd_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
|
.identity = "FTS Teutates Hardware Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops fts_wd_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = fts_wd_start,
|
|
.stop = fts_wd_stop,
|
|
.set_timeout = fts_wd_set_timeout,
|
|
};
|
|
|
|
static int fts_watchdog_init(struct fts_data *data)
|
|
{
|
|
int timeout, ret;
|
|
|
|
watchdog_set_drvdata(&data->wdd, data);
|
|
|
|
timeout = fts_read_byte(data->client, FTS_WATCHDOG_TIME_PRESET);
|
|
if (timeout < 0)
|
|
return timeout;
|
|
|
|
/* watchdog not running, set timeout to a default of 60 sec. */
|
|
if (timeout == 0) {
|
|
ret = fts_wd_set_resolution(data, seconds);
|
|
if (ret < 0)
|
|
return ret;
|
|
data->wdd.timeout = 60;
|
|
} else {
|
|
ret = fts_read_byte(data->client, FTS_WATCHDOG_CONTROL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->resolution = ret & BIT(1) ? seconds : minutes;
|
|
data->wdd.timeout = timeout * (u8)data->resolution;
|
|
set_bit(WDOG_HW_RUNNING, &data->wdd.status);
|
|
}
|
|
|
|
/* Register our watchdog part */
|
|
data->wdd.info = &fts_wd_info;
|
|
data->wdd.ops = &fts_wd_ops;
|
|
data->wdd.parent = &data->client->dev;
|
|
data->wdd.min_timeout = 1;
|
|
|
|
/* max timeout 255 minutes. */
|
|
data->wdd.max_hw_heartbeat_ms = 0xFF * 60 * MSEC_PER_SEC;
|
|
|
|
return devm_watchdog_register_device(&data->client->dev, &data->wdd);
|
|
}
|
|
|
|
static umode_t fts_is_visible(const void *devdata, enum hwmon_sensor_types type, u32 attr,
|
|
int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_fault:
|
|
return 0444;
|
|
case hwmon_temp_alarm:
|
|
return 0644;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_fan:
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
case hwmon_fan_fault:
|
|
return 0444;
|
|
case hwmon_fan_alarm:
|
|
return 0644;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_pwm:
|
|
case hwmon_in:
|
|
return 0444;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fts_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
struct fts_data *data = dev_get_drvdata(dev);
|
|
int ret = fts_update_device(data);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
*val = (data->temp_input[channel] - 64) * 1000;
|
|
|
|
return 0;
|
|
case hwmon_temp_alarm:
|
|
*val = !!(data->temp_alarm & BIT(channel));
|
|
|
|
return 0;
|
|
case hwmon_temp_fault:
|
|
/* 00h Temperature = Sensor Error */;
|
|
*val = (data->temp_input[channel] == 0);
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_fan:
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
*val = data->fan_input[channel] * 60;
|
|
|
|
return 0;
|
|
case hwmon_fan_alarm:
|
|
*val = !!(data->fan_alarm & BIT(channel));
|
|
|
|
return 0;
|
|
case hwmon_fan_fault:
|
|
*val = !(data->fan_present & BIT(channel));
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_pwm:
|
|
switch (attr) {
|
|
case hwmon_pwm_auto_channels_temp:
|
|
if (data->fan_source[channel] == FTS_FAN_SOURCE_INVALID)
|
|
*val = 0;
|
|
else
|
|
*val = BIT(data->fan_source[channel]);
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_in:
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
*val = DIV_ROUND_CLOSEST(data->volt[channel] * 3300, 255);
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int fts_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
|
|
long val)
|
|
{
|
|
struct fts_data *data = dev_get_drvdata(dev);
|
|
int ret = fts_update_device(data);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_alarm:
|
|
if (val)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
ret = fts_read_byte(data->client, FTS_REG_TEMP_CONTROL(channel));
|
|
if (ret >= 0)
|
|
ret = fts_write_byte(data->client, FTS_REG_TEMP_CONTROL(channel),
|
|
ret | 0x1);
|
|
if (ret >= 0)
|
|
data->valid = false;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_fan:
|
|
switch (attr) {
|
|
case hwmon_fan_alarm:
|
|
if (val)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
ret = fts_read_byte(data->client, FTS_REG_FAN_CONTROL(channel));
|
|
if (ret >= 0)
|
|
ret = fts_write_byte(data->client, FTS_REG_FAN_CONTROL(channel),
|
|
ret | 0x1);
|
|
if (ret >= 0)
|
|
data->valid = false;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static const struct hwmon_ops fts_ops = {
|
|
.is_visible = fts_is_visible,
|
|
.read = fts_read,
|
|
.write = fts_write,
|
|
};
|
|
|
|
static const struct hwmon_channel_info * const fts_info[] = {
|
|
HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_FAULT
|
|
),
|
|
HWMON_CHANNEL_INFO(fan,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_ALARM | HWMON_F_FAULT
|
|
),
|
|
HWMON_CHANNEL_INFO(pwm,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP,
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP
|
|
),
|
|
HWMON_CHANNEL_INFO(in,
|
|
HWMON_I_INPUT,
|
|
HWMON_I_INPUT,
|
|
HWMON_I_INPUT,
|
|
HWMON_I_INPUT
|
|
),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_chip_info fts_chip_info = {
|
|
.ops = &fts_ops,
|
|
.info = fts_info,
|
|
};
|
|
|
|
/*****************************************************************************/
|
|
/* Module initialization / remove functions */
|
|
/*****************************************************************************/
|
|
static int fts_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
int val;
|
|
|
|
/* detection works with revision greater or equal to 0x2b */
|
|
val = i2c_smbus_read_byte_data(client, FTS_DEVICE_REVISION_REG);
|
|
if (val < 0x2b)
|
|
return -ENODEV;
|
|
|
|
/* Device Detect Regs must have 0x17 0x34 and 0x54 */
|
|
val = i2c_smbus_read_byte_data(client, FTS_DEVICE_DETECT_REG_1);
|
|
if (val != 0x17)
|
|
return -ENODEV;
|
|
|
|
val = i2c_smbus_read_byte_data(client, FTS_DEVICE_DETECT_REG_2);
|
|
if (val != 0x34)
|
|
return -ENODEV;
|
|
|
|
val = i2c_smbus_read_byte_data(client, FTS_DEVICE_DETECT_REG_3);
|
|
if (val != 0x54)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* 0x10 == Baseboard Management Controller, 0x01 == Teutates
|
|
* Device ID Reg needs to be 0x11
|
|
*/
|
|
val = i2c_smbus_read_byte_data(client, FTS_DEVICE_ID_REG);
|
|
if (val != 0x11)
|
|
return -ENODEV;
|
|
|
|
strscpy(info->type, fts_id[0].name, I2C_NAME_SIZE);
|
|
info->flags = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int fts_probe(struct i2c_client *client)
|
|
{
|
|
u8 revision;
|
|
struct fts_data *data;
|
|
int err;
|
|
s8 deviceid;
|
|
struct device *hwmon_dev;
|
|
|
|
if (client->addr != 0x73)
|
|
return -ENODEV;
|
|
|
|
/* Baseboard Management Controller check */
|
|
deviceid = i2c_smbus_read_byte_data(client, FTS_DEVICE_ID_REG);
|
|
if (deviceid > 0 && (deviceid & 0xF0) == 0x10) {
|
|
switch (deviceid & 0x0F) {
|
|
case 0x01:
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev,
|
|
"No Baseboard Management Controller\n");
|
|
return -ENODEV;
|
|
}
|
|
} else {
|
|
dev_dbg(&client->dev, "No fujitsu board\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct fts_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&data->update_lock);
|
|
mutex_init(&data->access_lock);
|
|
data->client = client;
|
|
dev_set_drvdata(&client->dev, data);
|
|
|
|
err = i2c_smbus_read_byte_data(client, FTS_DEVICE_REVISION_REG);
|
|
if (err < 0)
|
|
return err;
|
|
revision = err;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, "ftsteutates", data,
|
|
&fts_chip_info, NULL);
|
|
if (IS_ERR(hwmon_dev))
|
|
return PTR_ERR(hwmon_dev);
|
|
|
|
err = fts_watchdog_init(data);
|
|
if (err)
|
|
return err;
|
|
|
|
dev_info(&client->dev, "Detected FTS Teutates chip, revision: %d.%d\n",
|
|
(revision & 0xF0) >> 4, revision & 0x0F);
|
|
return 0;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* Module Details */
|
|
/*****************************************************************************/
|
|
static struct i2c_driver fts_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "ftsteutates",
|
|
},
|
|
.id_table = fts_id,
|
|
.probe = fts_probe,
|
|
.detect = fts_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(fts_driver);
|
|
|
|
MODULE_AUTHOR("Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>");
|
|
MODULE_DESCRIPTION("FTS Teutates driver");
|
|
MODULE_LICENSE("GPL");
|