mirror_ubuntu-kernels/arch/x86/include/asm/iosf_mbi.h

254 lines
7.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Intel OnChip System Fabric MailBox access support
*/
#ifndef IOSF_MBI_SYMS_H
#define IOSF_MBI_SYMS_H
#include <linux/notifier.h>
#define MBI_MCR_OFFSET 0xD0
#define MBI_MDR_OFFSET 0xD4
#define MBI_MCRX_OFFSET 0xD8
#define MBI_RD_MASK 0xFEFFFFFF
#define MBI_WR_MASK 0X01000000
#define MBI_MASK_HI 0xFFFFFF00
#define MBI_MASK_LO 0x000000FF
#define MBI_ENABLE 0xF0
/* IOSF SB read/write opcodes */
#define MBI_MMIO_READ 0x00
#define MBI_MMIO_WRITE 0x01
#define MBI_CFG_READ 0x04
#define MBI_CFG_WRITE 0x05
#define MBI_CR_READ 0x06
#define MBI_CR_WRITE 0x07
#define MBI_REG_READ 0x10
#define MBI_REG_WRITE 0x11
#define MBI_ESRAM_READ 0x12
#define MBI_ESRAM_WRITE 0x13
/* Baytrail available units */
#define BT_MBI_UNIT_AUNIT 0x00
#define BT_MBI_UNIT_SMC 0x01
#define BT_MBI_UNIT_CPU 0x02
#define BT_MBI_UNIT_BUNIT 0x03
#define BT_MBI_UNIT_PMC 0x04
#define BT_MBI_UNIT_GFX 0x06
#define BT_MBI_UNIT_SMI 0x0C
#define BT_MBI_UNIT_CCK 0x14
#define BT_MBI_UNIT_USB 0x43
#define BT_MBI_UNIT_SATA 0xA3
#define BT_MBI_UNIT_PCIE 0xA6
/* Quark available units */
#define QRK_MBI_UNIT_HBA 0x00
#define QRK_MBI_UNIT_HB 0x03
#define QRK_MBI_UNIT_RMU 0x04
#define QRK_MBI_UNIT_MM 0x05
#define QRK_MBI_UNIT_SOC 0x31
/* Action values for the pmic_bus_access_notifier functions */
#define MBI_PMIC_BUS_ACCESS_BEGIN 1
#define MBI_PMIC_BUS_ACCESS_END 2
#if IS_ENABLED(CONFIG_IOSF_MBI)
bool iosf_mbi_available(void);
/**
* iosf_mbi_read() - MailBox Interface read command
* @port: port indicating subunit being accessed
* @opcode: port specific read or write opcode
* @offset: register address offset
* @mdr: register data to be read
*
* Locking is handled by spinlock - cannot sleep.
* Return: Nonzero on error
*/
int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
/**
* iosf_mbi_write() - MailBox unmasked write command
* @port: port indicating subunit being accessed
* @opcode: port specific read or write opcode
* @offset: register address offset
* @mdr: register data to be written
*
* Locking is handled by spinlock - cannot sleep.
* Return: Nonzero on error
*/
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
/**
* iosf_mbi_modify() - MailBox masked write command
* @port: port indicating subunit being accessed
* @opcode: port specific read or write opcode
* @offset: register address offset
* @mdr: register data being modified
* @mask: mask indicating bits in mdr to be modified
*
* Locking is handled by spinlock - cannot sleep.
* Return: Nonzero on error
*/
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
/**
* iosf_mbi_punit_acquire() - Acquire access to the P-Unit
*
* One some systems the P-Unit accesses the PMIC to change various voltages
* through the same bus as other kernel drivers use for e.g. battery monitoring.
*
* If a driver sends requests to the P-Unit which require the P-Unit to access
* the PMIC bus while another driver is also accessing the PMIC bus various bad
* things happen.
*
* Call this function before sending requests to the P-Unit which may make it
* access the PMIC, be it through iosf_mbi* functions or through other means.
* This function will block all kernel access to the PMIC I2C bus, so that the
* P-Unit can safely access the PMIC over the shared I2C bus.
*
* Note on these systems the i2c-bus driver will request a semaphore from the
* P-Unit for exclusive access to the PMIC bus when i2c drivers are accessing
* it, but this does not appear to be sufficient, we still need to avoid making
* certain P-Unit requests during the access window to avoid problems.
*
* This function locks a mutex, as such it may sleep.
*/
void iosf_mbi_punit_acquire(void);
/**
* iosf_mbi_punit_release() - Release access to the P-Unit
*/
void iosf_mbi_punit_release(void);
/**
* iosf_mbi_block_punit_i2c_access() - Block P-Unit accesses to the PMIC bus
*
* Call this function to block P-Unit access to the PMIC I2C bus, so that the
* kernel can safely access the PMIC over the shared I2C bus.
*
* This function acquires the P-Unit bus semaphore and notifies
* pmic_bus_access_notifier listeners that they may no longer access the
* P-Unit in a way which may cause it to access the shared I2C bus.
*
* Note this function may be called multiple times and the bus will not
* be released until iosf_mbi_unblock_punit_i2c_access() has been called the
* same amount of times.
*
* Return: Nonzero on error
*/
int iosf_mbi_block_punit_i2c_access(void);
/*
* iosf_mbi_unblock_punit_i2c_access() - Release PMIC I2C bus block
*
* Release i2c access block gotten through iosf_mbi_block_punit_i2c_access().
*/
void iosf_mbi_unblock_punit_i2c_access(void);
/**
* iosf_mbi_register_pmic_bus_access_notifier - Register PMIC bus notifier
*
* This function can be used by drivers which may need to acquire P-Unit
* managed resources from interrupt context, where iosf_mbi_punit_acquire()
* can not be used.
*
* This function allows a driver to register a notifier to get notified (in a
* process context) before other drivers start accessing the PMIC bus.
*
* This allows the driver to acquire any resources, which it may need during
* the window the other driver is accessing the PMIC, before hand.
*
* @nb: notifier_block to register
*/
int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb);
/**
* iosf_mbi_register_pmic_bus_access_notifier - Unregister PMIC bus notifier
*
* @nb: notifier_block to unregister
*/
int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb);
/**
* iosf_mbi_unregister_pmic_bus_access_notifier_unlocked - Unregister PMIC bus
* notifier, unlocked
*
* Like iosf_mbi_unregister_pmic_bus_access_notifier(), but for use when the
* caller has already called iosf_mbi_punit_acquire() itself.
*
* @nb: notifier_block to unregister
*/
int iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(
struct notifier_block *nb);
/**
* iosf_mbi_assert_punit_acquired - Assert that the P-Unit has been acquired.
*/
void iosf_mbi_assert_punit_acquired(void);
#else /* CONFIG_IOSF_MBI is not enabled */
static inline
bool iosf_mbi_available(void)
{
return false;
}
static inline
int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
{
WARN(1, "IOSF_MBI driver not available");
return -EPERM;
}
static inline
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
{
WARN(1, "IOSF_MBI driver not available");
return -EPERM;
}
static inline
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
{
WARN(1, "IOSF_MBI driver not available");
return -EPERM;
}
static inline void iosf_mbi_punit_acquire(void) {}
static inline void iosf_mbi_punit_release(void) {}
static inline
int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
{
return 0;
}
static inline
int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
{
return 0;
}
static inline int
iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(struct notifier_block *nb)
{
return 0;
}
static inline
int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v)
{
return 0;
}
static inline void iosf_mbi_assert_punit_acquired(void) {}
#endif /* CONFIG_IOSF_MBI */
#endif /* IOSF_MBI_SYMS_H */