241 lines
6.2 KiB
C
241 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright 2011-2013 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "cpuidle.h"
|
|
#include "hardware.h"
|
|
|
|
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
|
|
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
|
|
{
|
|
if (IS_BUILTIN(CONFIG_PHYLIB)) {
|
|
/* min rx data delay */
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
|
|
|
|
/* max rx/tx clock delay, min rx/tx control delay */
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
|
|
* as they are used for slots1-7 PERST#
|
|
*/
|
|
static void ventana_pciesw_early_fixup(struct pci_dev *dev)
|
|
{
|
|
u32 dw;
|
|
|
|
if (!of_machine_is_compatible("gw,ventana"))
|
|
return;
|
|
|
|
if (dev->devfn != 0)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0x62c, &dw);
|
|
dw |= 0xaaa8; // GPIO1-7 outputs
|
|
pci_write_config_dword(dev, 0x62c, dw);
|
|
|
|
pci_read_config_dword(dev, 0x644, &dw);
|
|
dw |= 0xfe; // GPIO1-7 output high
|
|
pci_write_config_dword(dev, 0x644, dw);
|
|
|
|
msleep(100);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
|
|
|
|
static void __init imx6q_enet_phy_init(void)
|
|
{
|
|
if (IS_BUILTIN(CONFIG_PHYLIB)) {
|
|
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
|
|
ksz9021rn_phy_fixup);
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_1588_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct clk *ptp_clk, *fec_enet_ref;
|
|
struct clk *enet_ref;
|
|
struct regmap *gpr;
|
|
u32 clksel;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
|
|
if (!np) {
|
|
pr_warn("%s: failed to find fec node\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If enet_clk_ref configured, we assume DT did it properly and .
|
|
* clk-imx6q.c will do needed configuration.
|
|
*/
|
|
fec_enet_ref = of_clk_get_by_name(np, "enet_clk_ref");
|
|
if (!IS_ERR(fec_enet_ref))
|
|
goto put_node;
|
|
|
|
ptp_clk = of_clk_get(np, 2);
|
|
if (IS_ERR(ptp_clk)) {
|
|
pr_warn("%s: failed to get ptp clock\n", __func__);
|
|
goto put_node;
|
|
}
|
|
|
|
enet_ref = clk_get_sys(NULL, "enet_ref");
|
|
if (IS_ERR(enet_ref)) {
|
|
pr_warn("%s: failed to get enet clock\n", __func__);
|
|
goto put_ptp_clk;
|
|
}
|
|
|
|
/*
|
|
* If enet_ref from ANATOP/CCM is the PTP clock source, we need to
|
|
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
|
|
* (external OSC), and we need to clear the bit.
|
|
*/
|
|
clksel = clk_is_match(ptp_clk, enet_ref) ?
|
|
IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
|
|
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (!IS_ERR(gpr))
|
|
regmap_update_bits(gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_ENET_CLK_SEL_MASK,
|
|
clksel);
|
|
else
|
|
pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
|
|
|
|
clk_put(enet_ref);
|
|
put_ptp_clk:
|
|
clk_put(ptp_clk);
|
|
put_node:
|
|
of_node_put(np);
|
|
}
|
|
|
|
static void __init imx6q_axi_init(void)
|
|
{
|
|
struct regmap *gpr;
|
|
unsigned int mask;
|
|
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (!IS_ERR(gpr)) {
|
|
/*
|
|
* Enable the cacheable attribute of VPU and IPU
|
|
* AXI transactions.
|
|
*/
|
|
mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
|
|
IMX6Q_GPR4_VPU_RD_CACHE_SEL |
|
|
IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
|
|
IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
|
|
IMX6Q_GPR4_IPU_WR_CACHE_CTL |
|
|
IMX6Q_GPR4_IPU_RD_CACHE_CTL;
|
|
regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
|
|
|
|
/* Increase IPU read QoS priority */
|
|
regmap_update_bits(gpr, IOMUXC_GPR6,
|
|
IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
|
|
IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
|
|
(0xf << 16) | (0x7 << 20));
|
|
regmap_update_bits(gpr, IOMUXC_GPR7,
|
|
IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
|
|
IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
|
|
(0xf << 16) | (0x7 << 20));
|
|
} else {
|
|
pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_init_machine(void)
|
|
{
|
|
if (cpu_is_imx6q() && imx_get_soc_revision() >= IMX_CHIP_REVISION_2_0)
|
|
/*
|
|
* SoCs that identify as i.MX6Q >= rev 2.0 are really i.MX6QP.
|
|
* Quirk: i.MX6QP revision = i.MX6Q revision - (1, 0),
|
|
* e.g. i.MX6QP rev 1.1 identifies as i.MX6Q rev 2.1.
|
|
*/
|
|
imx_print_silicon_rev("i.MX6QP", imx_get_soc_revision() - 0x10);
|
|
else
|
|
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
|
|
imx_get_soc_revision());
|
|
|
|
imx6q_enet_phy_init();
|
|
|
|
of_platform_default_populate(NULL, NULL, NULL);
|
|
|
|
imx_anatop_init();
|
|
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
|
|
imx6q_1588_init();
|
|
imx6q_axi_init();
|
|
}
|
|
|
|
static void __init imx6q_init_late(void)
|
|
{
|
|
/*
|
|
* WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
|
|
* there is no point to run cpuidle on them.
|
|
*
|
|
* It does work on imx6 Solo/DualLite starting from 1.1
|
|
*/
|
|
if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) ||
|
|
(cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
|
|
imx6q_cpuidle_init();
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
|
|
platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
|
|
}
|
|
|
|
static void __init imx6q_map_io(void)
|
|
{
|
|
debug_ll_io_init();
|
|
imx_scu_map_io();
|
|
}
|
|
|
|
static void __init imx6q_init_irq(void)
|
|
{
|
|
imx_gpc_check_dt();
|
|
imx_init_revision_from_anatop();
|
|
imx_init_l2cache();
|
|
imx_src_init();
|
|
irqchip_init();
|
|
imx6_pm_ccm_init("fsl,imx6q-ccm");
|
|
}
|
|
|
|
static const char * const imx6q_dt_compat[] __initconst = {
|
|
"fsl,imx6dl",
|
|
"fsl,imx6q",
|
|
"fsl,imx6qp",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
|
|
.l2c_aux_val = 0,
|
|
.l2c_aux_mask = ~0,
|
|
.smp = smp_ops(imx_smp_ops),
|
|
.map_io = imx6q_map_io,
|
|
.init_irq = imx6q_init_irq,
|
|
.init_machine = imx6q_init_machine,
|
|
.init_late = imx6q_init_late,
|
|
.dt_compat = imx6q_dt_compat,
|
|
MACHINE_END
|