91 lines
2.3 KiB
YAML
91 lines
2.3 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/watchdog/realtek,otto-wdt.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Realtek Otto watchdog timer
|
|
|
|
maintainers:
|
|
- Sander Vanheule <sander@svanheule.net>
|
|
|
|
description: |
|
|
The timer has two timeout phases. Both phases have a maximum duration of 32
|
|
prescaled clock ticks, which is ca. 43s with a bus clock of 200MHz. The
|
|
minimum duration of each phase is one tick. Each phase can trigger an
|
|
interrupt, although the phase 2 interrupt will occur with the system reset.
|
|
- Phase 1: During this phase, the WDT can be pinged to reset the timeout.
|
|
- Phase 2: Starts after phase 1 has timed out, and only serves to give the
|
|
system some time to clean up, or notify others that it's going to reset.
|
|
During this phase, pinging the WDT has no effect, and a reset is
|
|
unavoidable, unless the WDT is disabled.
|
|
|
|
allOf:
|
|
- $ref: watchdog.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- realtek,rtl8380-wdt
|
|
- realtek,rtl8390-wdt
|
|
- realtek,rtl9300-wdt
|
|
- realtek,rtl9310-wdt
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
items:
|
|
- description: interrupt specifier for pretimeout
|
|
- description: interrupt specifier for timeout
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: phase1
|
|
- const: phase2
|
|
|
|
realtek,reset-mode:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description: |
|
|
Specify how the system is reset after a timeout. Defaults to "cpu" if
|
|
left unspecified.
|
|
oneOf:
|
|
- description: Reset the entire chip
|
|
const: soc
|
|
- description: |
|
|
Reset the CPU and IPsec engine, but leave other peripherals untouched
|
|
const: cpu
|
|
- description: |
|
|
Reset the execution pointer, but don't actually reset any hardware
|
|
const: software
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- interrupts
|
|
- interrupt-names
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
watchdog: watchdog@3150 {
|
|
compatible = "realtek,rtl8380-wdt";
|
|
reg = <0x3150 0xc>;
|
|
|
|
realtek,reset-mode = "soc";
|
|
|
|
clocks = <&lxbus_clock>;
|
|
timeout-sec = <20>;
|
|
|
|
interrupt-parent = <&rtlintc>;
|
|
interrupt-names = "phase1", "phase2";
|
|
interrupts = <19>, <18>;
|
|
};
|
|
|
|
...
|