111 lines
2.8 KiB
YAML
111 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sound/microchip,sama7g5-i2smcc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Microchip I2S Multi-Channel Controller
|
|
|
|
maintainers:
|
|
- Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
|
|
|
|
description:
|
|
The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
|
|
supports a Time Division Multiplexed (TDM) interface with external
|
|
multi-channel audio codecs. It consists of a receiver, a transmitter and a
|
|
common clock generator that can be enabled separately to provide Adapter,
|
|
Client or Controller modes with receiver and/or transmitter active.
|
|
On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
|
|
multi-channel is supported by using multiple data pins, output and
|
|
input, without TDM.
|
|
|
|
properties:
|
|
"#sound-dai-cells":
|
|
const: 0
|
|
|
|
compatible:
|
|
enum:
|
|
- microchip,sam9x60-i2smcc
|
|
- microchip,sama7g5-i2smcc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: Peripheral Bus Clock
|
|
- description: Generic Clock (Optional). Should be set mostly when Master
|
|
Mode is required.
|
|
minItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: pclk
|
|
- const: gclk
|
|
minItems: 1
|
|
|
|
dmas:
|
|
items:
|
|
- description: TX DMA Channel
|
|
- description: RX DMA Channel
|
|
|
|
dma-names:
|
|
items:
|
|
- const: tx
|
|
- const: rx
|
|
|
|
microchip,tdm-data-pair:
|
|
description:
|
|
Represents the DIN/DOUT pair pins that are used to receive/send
|
|
TDM data. It is optional and it is only needed if the controller
|
|
uses the TDM mode.
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
enum: [0, 1, 2, 3]
|
|
default: 0
|
|
|
|
allOf:
|
|
- $ref: dai-common.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
const: microchip,sam9x60-i2smcc
|
|
then:
|
|
properties:
|
|
microchip,tdm-data-pair: false
|
|
|
|
required:
|
|
- "#sound-dai-cells"
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- dmas
|
|
- dma-names
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/dma/at91.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
i2s@f001c000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "microchip,sam9x60-i2smcc";
|
|
reg = <0xf001c000 0x100>;
|
|
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
|
|
AT91_XDMAC_DT_PERID(36))>,
|
|
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
|
|
AT91_XDMAC_DT_PERID(37))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&i2s_clk>, <&i2s_gclk>;
|
|
clock-names = "pclk", "gclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2s_default>;
|
|
};
|