105 lines
2.5 KiB
YAML
105 lines
2.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: AWINIC AW2013 3-channel LED Driver
|
|
|
|
maintainers:
|
|
- Nikita Travkin <nikitos.tr@gmail.com>
|
|
|
|
description: |
|
|
The AW2013 is a 3-channel LED driver with I2C interface. It can control
|
|
LED brightness with PWM output.
|
|
|
|
properties:
|
|
compatible:
|
|
const: awinic,aw2013
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
description: Open-drain, low active interrupt pin "INTN".
|
|
Used to report completion of operations (power up, LED breath effects).
|
|
|
|
vcc-supply:
|
|
description: Regulator providing power to the "VCC" pin.
|
|
|
|
vio-supply:
|
|
description: Regulator providing power for pull-up of the I/O lines.
|
|
"VIO1" in the typical application circuit example of the datasheet.
|
|
Note that this regulator does not directly connect to AW2013, but is
|
|
needed for the correct operation of the interrupt and I2C lines.
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
patternProperties:
|
|
"^led@[0-2]$":
|
|
type: object
|
|
$ref: common.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
reg:
|
|
description: Index of the LED.
|
|
minimum: 0
|
|
maximum: 2
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led-controller@45 {
|
|
compatible = "awinic,aw2013";
|
|
reg = <0x45>;
|
|
interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vcc-supply = <&pm8916_l17>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
led-max-microamp = <5000>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
led-max-microamp = <5000>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
led-max-microamp = <5000>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
};
|
|
};
|
|
...
|