54 lines
2.1 KiB
YAML
54 lines
2.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/leds/backlight/common.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Common backlight properties
|
|
|
|
maintainers:
|
|
- Lee Jones <lee@kernel.org>
|
|
- Daniel Thompson <daniel.thompson@linaro.org>
|
|
- Jingoo Han <jingoohan1@gmail.com>
|
|
|
|
description:
|
|
Backlight devices provide backlight for different types of graphical
|
|
displays. They are typically but not necessarily implemented using a white
|
|
LED powered by a boost converter.
|
|
|
|
properties:
|
|
default-brightness:
|
|
description:
|
|
The default brightness that should be applied to the LED by the operating
|
|
system on start-up. The brightness should not exceed the brightness the
|
|
LED can provide.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
max-brightness:
|
|
description:
|
|
Normally the maximum brightness is determined by the hardware and this
|
|
property is not required. This property is used to put a software limit
|
|
on the brightness apart from what the driver says, as it could happen
|
|
that a LED can be made so bright that it gets damaged or causes damage
|
|
due to restrictions in a specific system, such as mounting conditions.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
brightness-levels:
|
|
description:
|
|
Array of distinct brightness levels. The levels must be in the range
|
|
accepted by the underlying LED device. Typically these are in the range
|
|
from 0 to 255, but any range starting at 0 will do, as long as they are
|
|
accepted by the LED.
|
|
The 0 value means a 0% of brightness (darkest/off), while the last value
|
|
in the array represents a full 100% brightness (brightest).
|
|
If this array is not provided, the driver default mapping is used.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
|
|
default-brightness-level:
|
|
description:
|
|
The default brightness level (index into the array defined by the
|
|
"brightness-levels" property).
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
additionalProperties: true
|