76 lines
2.1 KiB
Plaintext
76 lines
2.1 KiB
Plaintext
Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
|
|
|
|
The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
|
|
See ../../mfd/atmel-hlcdc.txt for more details.
|
|
|
|
Required properties:
|
|
- compatible: value should be "atmel,hlcdc-display-controller"
|
|
- pinctrl-names: the pin control state names. Should contain "default".
|
|
- pinctrl-0: should contain the default pinctrl states.
|
|
- #address-cells: should be set to 1.
|
|
- #size-cells: should be set to 0.
|
|
|
|
Required children nodes:
|
|
Children nodes are encoding available output ports and their connections
|
|
to external devices using the OF graph representation (see ../graph.txt).
|
|
At least one port node is required.
|
|
|
|
Optional properties in grandchild nodes:
|
|
Any endpoint grandchild node may specify a desired video interface
|
|
according to ../../media/video-interfaces.txt, specifically
|
|
- bus-width: recognized values are <12>, <16>, <18> and <24>, and
|
|
override any output mode selection heuristic, forcing "rgb444",
|
|
"rgb565", "rgb666" and "rgb888" respectively.
|
|
|
|
Example:
|
|
|
|
hlcdc: hlcdc@f0030000 {
|
|
compatible = "atmel,sama5d3-hlcdc";
|
|
reg = <0xf0030000 0x2000>;
|
|
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
|
|
clock-names = "periph_clk","sys_clk", "slow_clk";
|
|
|
|
hlcdc-display-controller {
|
|
compatible = "atmel,hlcdc-display-controller";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
hlcdc_panel_output: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_input>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hlcdc_pwm: hlcdc-pwm {
|
|
compatible = "atmel,hlcdc-pwm";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_pwm>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
};
|
|
|
|
Example 2: With a video interface override to force rgb565; as above
|
|
but with these changes/additions:
|
|
|
|
&hlcdc {
|
|
hlcdc-display-controller {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
|
|
|
|
port@0 {
|
|
hlcdc_panel_output: endpoint@0 {
|
|
bus-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
};
|