90 lines
2.7 KiB
YAML
90 lines
2.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
|
|
|
|
maintainers:
|
|
- Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
|
description: |
|
|
On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
|
|
Standby Mode share the same register block. On RZ/V2M, the functionality is
|
|
similar, but does not have Clock Monitor Registers.
|
|
|
|
They provide the following functionalities:
|
|
- The CPG block generates various core clocks,
|
|
- The Module Standby Mode block provides two functions:
|
|
1. Module Standby, providing a Clock Domain to control the clock supply
|
|
to individual SoC devices,
|
|
2. Reset Control, to perform a software reset of individual SoC devices.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
|
|
- renesas,r9a07g044-cpg # RZ/G2{L,LC}
|
|
- renesas,r9a07g054-cpg # RZ/V2L
|
|
- renesas,r9a08g045-cpg # RZ/G3S
|
|
- renesas,r9a09g011-cpg # RZ/V2M
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
description:
|
|
Clock source to CPG can be either from external clock input (EXCLK) or
|
|
crystal oscillator (XIN/XOUT).
|
|
const: extal
|
|
|
|
'#clock-cells':
|
|
description: |
|
|
- For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
|
|
and a core clock reference, as defined in
|
|
<dt-bindings/clock/r9a0*-cpg.h>,
|
|
- For module clocks, the two clock specifier cells must be "CPG_MOD" and
|
|
a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
|
|
const: 2
|
|
|
|
'#power-domain-cells':
|
|
description:
|
|
SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
|
|
can be power-managed through Module Standby should refer to the CPG device
|
|
node in their "power-domains" property, as documented by the generic PM
|
|
Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
|
|
const: 0
|
|
|
|
'#reset-cells':
|
|
description:
|
|
The single reset specifier cell must be the module number, as defined in
|
|
<dt-bindings/clock/r9a0*-cpg.h>.
|
|
const: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- '#clock-cells'
|
|
- '#power-domain-cells'
|
|
- '#reset-cells'
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
cpg: clock-controller@11010000 {
|
|
compatible = "renesas,r9a07g044-cpg";
|
|
reg = <0x11010000 0x10000>;
|
|
clocks = <&extal_clk>;
|
|
clock-names = "extal";
|
|
#clock-cells = <2>;
|
|
#power-domain-cells = <0>;
|
|
#reset-cells = <1>;
|
|
};
|