104 lines
2.9 KiB
YAML
104 lines
2.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock
|
|
|
|
maintainers:
|
|
- Aisheng Dong <aisheng.dong@nxp.com>
|
|
|
|
description: |
|
|
The Low-Power Clock Gate (LPCG) modules contain a local programming
|
|
model to control the clock gates for the peripherals. An LPCG module
|
|
is used to locally gate the clocks for the associated peripheral.
|
|
|
|
This level of clock gating is provided after the clocks are generated
|
|
by the SCU resources and clock controls. Thus even if the clock is
|
|
enabled by these control bits, it might still not be running based
|
|
on the base resource.
|
|
|
|
The clock consumer should specify the desired clock by having the clock
|
|
ID in its "clocks" phandle cell. See the full list of clock IDs from:
|
|
include/dt-bindings/clock/imx8-lpcg.h
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: fsl,imx8qxp-lpcg
|
|
- items:
|
|
- enum:
|
|
- fsl,imx8qm-lpcg
|
|
- const: fsl,imx8qxp-lpcg
|
|
- enum:
|
|
- fsl,imx8qxp-lpcg-adma
|
|
- fsl,imx8qxp-lpcg-conn
|
|
- fsl,imx8qxp-lpcg-dc
|
|
- fsl,imx8qxp-lpcg-dsp
|
|
- fsl,imx8qxp-lpcg-gpu
|
|
- fsl,imx8qxp-lpcg-hsio
|
|
- fsl,imx8qxp-lpcg-img
|
|
- fsl,imx8qxp-lpcg-lsio
|
|
- fsl,imx8qxp-lpcg-vpu
|
|
deprecated: true
|
|
reg:
|
|
maxItems: 1
|
|
|
|
'#clock-cells':
|
|
const: 1
|
|
|
|
clocks:
|
|
description: |
|
|
Input parent clocks phandle array for each clock
|
|
minItems: 1
|
|
maxItems: 8
|
|
|
|
clock-indices:
|
|
description: |
|
|
An integer array indicating the bit offset for each clock.
|
|
Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the
|
|
supported LPCG clock indices.
|
|
minItems: 1
|
|
maxItems: 8
|
|
|
|
clock-output-names:
|
|
description: |
|
|
Shall be the corresponding names of the outputs.
|
|
NOTE this property must be specified in the same order
|
|
as the clock-indices property.
|
|
minItems: 1
|
|
maxItems: 8
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- '#clock-cells'
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/imx8-lpcg.h>
|
|
#include <dt-bindings/firmware/imx/rsrc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
sdhc0_lpcg: clock-controller@5b200000 {
|
|
compatible = "fsl,imx8qxp-lpcg";
|
|
reg = <0x5b200000 0x10000>;
|
|
#clock-cells = <1>;
|
|
clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>,
|
|
<&conn_ipg_clk>,
|
|
<&conn_axi_clk>;
|
|
clock-indices = <IMX_LPCG_CLK_0>,
|
|
<IMX_LPCG_CLK_4>,
|
|
<IMX_LPCG_CLK_5>;
|
|
clock-output-names = "sdhc0_lpcg_per_clk",
|
|
"sdhc0_lpcg_ipg_clk",
|
|
"sdhc0_lpcg_ahb_clk";
|
|
power-domains = <&pd IMX_SC_R_SDHC_0>;
|
|
};
|