63 lines
1.9 KiB
Plaintext
63 lines
1.9 KiB
Plaintext
What: /sys/class/leds/<led>/ttyname
|
|
Date: Dec 2020
|
|
KernelVersion: 5.10
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Specifies the tty device name of the triggering tty
|
|
|
|
What: /sys/class/leds/<led>/rx
|
|
Date: February 2024
|
|
KernelVersion: 6.8
|
|
Description:
|
|
Signal reception (rx) of data on the named tty device.
|
|
If set to 0, the LED will not blink on reception.
|
|
If set to 1 (default), the LED will blink on reception.
|
|
|
|
What: /sys/class/leds/<led>/tx
|
|
Date: February 2024
|
|
KernelVersion: 6.8
|
|
Description:
|
|
Signal transmission (tx) of data on the named tty device.
|
|
If set to 0, the LED will not blink on transmission.
|
|
If set to 1 (default), the LED will blink on transmission.
|
|
|
|
What: /sys/class/leds/<led>/cts
|
|
Date: February 2024
|
|
KernelVersion: 6.8
|
|
Description:
|
|
CTS = Clear To Send
|
|
DCE is ready to accept data from the DTE.
|
|
If the line state is detected, the LED is switched on.
|
|
If set to 0 (default), the LED will not evaluate CTS.
|
|
If set to 1, the LED will evaluate CTS.
|
|
|
|
What: /sys/class/leds/<led>/dsr
|
|
Date: February 2024
|
|
KernelVersion: 6.8
|
|
Description:
|
|
DSR = Data Set Ready
|
|
DCE is ready to receive and send data.
|
|
If the line state is detected, the LED is switched on.
|
|
If set to 0 (default), the LED will not evaluate DSR.
|
|
If set to 1, the LED will evaluate DSR.
|
|
|
|
What: /sys/class/leds/<led>/dcd
|
|
Date: February 2024
|
|
KernelVersion: 6.8
|
|
Description:
|
|
DCD = Data Carrier Detect
|
|
DTE is receiving a carrier from the DCE.
|
|
If the line state is detected, the LED is switched on.
|
|
If set to 0 (default), the LED will not evaluate CAR (DCD).
|
|
If set to 1, the LED will evaluate CAR (DCD).
|
|
|
|
What: /sys/class/leds/<led>/rng
|
|
Date: February 2024
|
|
KernelVersion: 6.8
|
|
Description:
|
|
RNG = Ring Indicator
|
|
DCE has detected an incoming ring signal on the telephone
|
|
line. If the line state is detected, the LED is switched on.
|
|
If set to 0 (default), the LED will not evaluate RNG.
|
|
If set to 1, the LED will evaluate RNG.
|