78 lines
3.1 KiB
Plaintext
78 lines
3.1 KiB
Plaintext
What: /sys/bus/pci/drivers/xhci_hcd/.../dbc
|
|
Date: June 2017
|
|
Contact: Lu Baolu <baolu.lu@linux.intel.com>
|
|
Description:
|
|
xHCI compatible USB host controllers (i.e. super-speed
|
|
USB3 controllers) are often implemented with the Debug
|
|
Capability (DbC). It can present a debug device which
|
|
is fully compliant with the USB framework and provides
|
|
the equivalent of a very high performance full-duplex
|
|
serial link for debug purpose.
|
|
|
|
The DbC debug device shares a root port with xHCI host.
|
|
When the DbC is enabled, the root port will be assigned
|
|
to the Debug Capability. Otherwise, it will be assigned
|
|
to xHCI.
|
|
|
|
Writing "enable" to this attribute will enable the DbC
|
|
functionality and the shared root port will be assigned
|
|
to the DbC device. Writing "disable" to this attribute
|
|
will disable the DbC functionality and the shared root
|
|
port will roll back to the xHCI.
|
|
|
|
Reading this attribute gives the state of the DbC. It
|
|
can be one of the following states: disabled, enabled,
|
|
initialized, connected, configured and stalled.
|
|
|
|
What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_idVendor
|
|
Date: March 2023
|
|
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
|
|
Description:
|
|
This dbc_idVendor attribute lets us change the idVendor field
|
|
presented in the USB device descriptor by this xhci debug
|
|
device.
|
|
Value can only be changed while debug capability (DbC) is in
|
|
disabled state to prevent USB device descriptor change while
|
|
connected to a USB host.
|
|
The default value is 0x1d6b (Linux Foundation).
|
|
It can be any 16-bit integer.
|
|
|
|
What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_idProduct
|
|
Date: March 2023
|
|
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
|
|
Description:
|
|
This dbc_idProduct attribute lets us change the idProduct field
|
|
presented in the USB device descriptor by this xhci debug
|
|
device.
|
|
Value can only be changed while debug capability (DbC) is in
|
|
disabled state to prevent USB device descriptor change while
|
|
connected to a USB host.
|
|
The default value is 0x0010. It can be any 16-bit integer.
|
|
|
|
What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_bcdDevice
|
|
Date: March 2023
|
|
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
|
|
Description:
|
|
This dbc_bcdDevice attribute lets us change the bcdDevice field
|
|
presented in the USB device descriptor by this xhci debug
|
|
device.
|
|
Value can only be changed while debug capability (DbC) is in
|
|
disabled state to prevent USB device descriptor change while
|
|
connected to a USB host.
|
|
The default value is 0x0010. (device rev 0.10)
|
|
It can be any 16-bit integer.
|
|
|
|
What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_bInterfaceProtocol
|
|
Date: March 2023
|
|
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
|
|
Description:
|
|
This attribute lets us change the bInterfaceProtocol field
|
|
presented in the USB Interface descriptor by the xhci debug
|
|
device.
|
|
Value can only be changed while debug capability (DbC) is in
|
|
disabled state to prevent USB descriptor change while
|
|
connected to a USB host.
|
|
The default value is 1 (GNU Remote Debug command).
|
|
Other permissible value is 0 which is for vendor defined debug
|
|
target.
|