785 lines
28 KiB
Plaintext
785 lines
28 KiB
Plaintext
sysfs interface common for all infiniband devices
|
|
-------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/<device>/node_type
|
|
What: /sys/class/infiniband/<device>/node_guid
|
|
What: /sys/class/infiniband/<device>/sys_image_guid
|
|
Date: Apr, 2005
|
|
KernelVersion: v2.6.12
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ===========================================
|
|
node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP,
|
|
switch or router)
|
|
|
|
node_guid: (RO) Node GUID
|
|
|
|
sys_image_guid: (RO) System image GUID
|
|
=============== ===========================================
|
|
|
|
|
|
What: /sys/class/infiniband/<device>/node_desc
|
|
Date: Feb, 2006
|
|
KernelVersion: v2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
(RW) Update the node description with information such as the
|
|
node's hostname, so that IB network management software can tie
|
|
its view to the real world.
|
|
|
|
|
|
What: /sys/class/infiniband/<device>/fw_ver
|
|
Date: Jun, 2016
|
|
KernelVersion: v4.10
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
(RO) Display firmware version
|
|
|
|
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/lid
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/rate
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/lid_mask_count
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/sm_sl
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/sm_lid
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/state
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/phys_state
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/cap_mask
|
|
Date: Apr, 2005
|
|
KernelVersion: v2.6.12
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
|
|
=============== ===============================================
|
|
lid: (RO) Port LID
|
|
|
|
rate: (RO) Port data rate (active width * active
|
|
speed)
|
|
|
|
lid_mask_count: (RO) Port LID mask count
|
|
|
|
sm_sl: (RO) Subnet manager SL for port's subnet
|
|
|
|
sm_lid: (RO) Subnet manager LID for port's subnet
|
|
|
|
state: (RO) Port state (DOWN, INIT, ARMED, ACTIVE or
|
|
ACTIVE_DEFER)
|
|
|
|
phys_state: (RO) Port physical state (Sleep, Polling,
|
|
LinkUp, etc)
|
|
|
|
cap_mask: (RO) Port capability mask. 2 bits here are
|
|
settable- IsCommunicationManagementSupported
|
|
(set when CM module is loaded) and IsSM (set
|
|
via open of issmN file).
|
|
=============== ===============================================
|
|
|
|
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/link_layer
|
|
Date: Oct, 2010
|
|
KernelVersion: v2.6.37
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
(RO) Link layer type information (Infiniband or Ethernet type)
|
|
|
|
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/symbol_error
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_remote_physical_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_switch_relay_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/link_error_recovery
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_constraint_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_contraint_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/local_link_integrity_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/excessive_buffer_overrun_errors
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_data
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_data
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_packets
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_packets
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_rcv_packets
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_xmit_packets
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_rcv_packets
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_xmit_packets
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/link_downed
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_discards
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/VL15_dropped
|
|
What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_wait
|
|
Date: Apr, 2005
|
|
KernelVersion: v2.6.12
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
**Errors info**:
|
|
|
|
symbol_error: (RO) Total number of minor link errors detected on
|
|
one or more physical lanes.
|
|
|
|
port_rcv_errors : (RO) Total number of packets containing an
|
|
error that were received on the port.
|
|
|
|
port_rcv_remote_physical_errors : (RO) Total number of packets
|
|
marked with the EBP delimiter received on the port.
|
|
|
|
port_rcv_switch_relay_errors : (RO) Total number of packets
|
|
received on the port that were discarded because they could not
|
|
be forwarded by the switch relay.
|
|
|
|
link_error_recovery: (RO) Total number of times the Port
|
|
Training state machine has successfully completed the link error
|
|
recovery process.
|
|
|
|
port_xmit_constraint_errors: (RO) Total number of packets not
|
|
transmitted from the switch physical port due to outbound raw
|
|
filtering or failing outbound partition or IP version check.
|
|
|
|
port_rcv_constraint_errors: (RO) Total number of packets
|
|
received on the switch physical port that are discarded due to
|
|
inbound raw filtering or failing inbound partition or IP version
|
|
check.
|
|
|
|
local_link_integrity_errors: (RO) The number of times that the
|
|
count of local physical errors exceeded the threshold specified
|
|
by LocalPhyErrors
|
|
|
|
excessive_buffer_overrun_errors: (RO) This counter, indicates an
|
|
input buffer overrun. It indicates possible misconfiguration of
|
|
a port, either by the Subnet Manager (SM) or by user
|
|
intervention. It can also indicate hardware issues or extremely
|
|
poor link signal integrity
|
|
|
|
**Data info**:
|
|
|
|
port_xmit_data: (RO) Total number of data octets, divided by 4
|
|
(lanes), transmitted on all VLs. This is 64 bit counter
|
|
|
|
port_rcv_data: (RO) Total number of data octets, divided by 4
|
|
(lanes), received on all VLs. This is 64 bit counter.
|
|
|
|
port_xmit_packets: (RO) Total number of packets transmitted on
|
|
all VLs from this port. This may include packets with errors.
|
|
This is 64 bit counter.
|
|
|
|
port_rcv_packets: (RO) Total number of packets (this may include
|
|
packets containing Errors. This is 64 bit counter.
|
|
|
|
link_downed: (RO) Total number of times the Port Training state
|
|
machine has failed the link error recovery process and downed
|
|
the link.
|
|
|
|
unicast_rcv_packets: (RO) Total number of unicast packets,
|
|
including unicast packets containing errors.
|
|
|
|
unicast_xmit_packets: (RO) Total number of unicast packets
|
|
transmitted on all VLs from the port. This may include unicast
|
|
packets with errors.
|
|
|
|
multicast_rcv_packets: (RO) Total number of multicast packets,
|
|
including multicast packets containing errors.
|
|
|
|
multicast_xmit_packets: (RO) Total number of multicast packets
|
|
transmitted on all VLs from the port. This may include multicast
|
|
packets with errors.
|
|
|
|
**Misc info**:
|
|
|
|
port_xmit_discards: (RO) Total number of outbound packets
|
|
discarded by the port because the port is down or congested.
|
|
|
|
VL15_dropped: (RO) Number of incoming VL15 packets dropped due
|
|
to resource limitations (e.g., lack of buffers) of the port.
|
|
|
|
port_xmit_wait: (RO) The number of ticks during which the port
|
|
had data to transmit but no data was sent during the entire tick
|
|
(either because of insufficient credits or because of lack of
|
|
arbitration).
|
|
|
|
Each of these files contains the corresponding value from the
|
|
port's Performance Management PortCounters attribute, as
|
|
described in the InfiniBand Architecture Specification.
|
|
|
|
|
|
What: /sys/class/infiniband/<device-name>/hw_counters/lifespan
|
|
What: /sys/class/infiniband/<device-name>/ports/<port-num>/hw_counters/lifespan
|
|
Date: May, 2016
|
|
KernelVersion: 4.6
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
The optional "hw_counters" subdirectory can be under either the
|
|
parent device or the port subdirectories or both. If present,
|
|
there are a list of counters provided by the hardware. They may
|
|
match some of the counters in the counters directory, but they
|
|
often include many other counters. In addition to the various
|
|
counters, there will be a file named "lifespan" that configures
|
|
how frequently the core should update the counters when they are
|
|
being accessed (counters are not updated if they are not being
|
|
accessed). The lifespan is in milliseconds and defaults to 10
|
|
unless set to something else by the driver. Users may echo a
|
|
value between 0-10000 to the lifespan file to set the length
|
|
of time between updates in milliseconds.
|
|
|
|
|
|
What: /sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/ndevs/<gid-index>
|
|
Date: November 29, 2015
|
|
KernelVersion: 4.4.0
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: The net-device's name associated with the GID resides
|
|
at index <gid-index>.
|
|
|
|
What: /sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/types/<gid-index>
|
|
Date: November 29, 2015
|
|
KernelVersion: 4.4.0
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: The RoCE type of the associated GID resides at index <gid-index>.
|
|
This could either be "IB/RoCE v1" for IB and RoCE v1 based GIDs
|
|
or "RoCE v2" for RoCE v2 based GIDs.
|
|
|
|
|
|
What: /sys/class/infiniband_mad/umad<N>/ibdev
|
|
What: /sys/class/infiniband_mad/umad<N>/port
|
|
What: /sys/class/infiniband_mad/issm<N>/ibdev
|
|
What: /sys/class/infiniband_mad/issm<N>/port
|
|
Date: Apr, 2005
|
|
KernelVersion: v2.6.12
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
Each port of each InfiniBand device has a "umad" device and an
|
|
"issm" device attached. For example, a two-port HCA will have
|
|
two umad devices and two issm devices, while a switch will have
|
|
one device of each type (for switch port 0).
|
|
|
|
======= =====================================
|
|
ibdev: (RO) Show Infiniband (IB) device name
|
|
|
|
port: (RO) Display port number
|
|
======= =====================================
|
|
|
|
|
|
What: /sys/class/infiniband_mad/abi_version
|
|
Date: Apr, 2005
|
|
KernelVersion: v2.6.12
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
(RO) Value is incremented if any changes are made that break
|
|
userspace ABI compatibility of umad & issm devices.
|
|
|
|
|
|
What: /sys/class/infiniband_verbs/uverbs<N>/ibdev
|
|
What: /sys/class/infiniband_verbs/uverbs<N>/abi_version
|
|
Date: Sept, 2005
|
|
KernelVersion: v2.6.14
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ===========================================
|
|
ibdev: (RO) Display Infiniband (IB) device name
|
|
|
|
abi_version: (RO) Show ABI version of IB device specific
|
|
interfaces.
|
|
=============== ===========================================
|
|
|
|
|
|
What: /sys/class/infiniband_verbs/abi_version
|
|
Date: Sep, 2005
|
|
KernelVersion: v2.6.14
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
(RO) Value is incremented if any changes are made that break
|
|
userspace ABI compatibility of uverbs devices.
|
|
|
|
|
|
sysfs interface for Mellanox IB HCA low-level driver (mthca)
|
|
------------------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/mthcaX/hw_rev
|
|
What: /sys/class/infiniband/mthcaX/hca_type
|
|
What: /sys/class/infiniband/mthcaX/board_id
|
|
Date: Apr, 2005
|
|
KernelVersion: v2.6.12
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ================================================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Host Channel Adapter type: MT23108, MT25208
|
|
(MT23108 compat mode), MT25208 or MT25204
|
|
|
|
board_id: (RO) Manufacturing board ID
|
|
=============== ================================================
|
|
|
|
|
|
sysfs interface for Mellanox ConnectX HCA IB driver (mlx4)
|
|
----------------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/mlx4_X/hw_rev
|
|
What: /sys/class/infiniband/mlx4_X/hca_type
|
|
What: /sys/class/infiniband/mlx4_X/board_id
|
|
Date: Sep, 2007
|
|
KernelVersion: v2.6.24
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ===============================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Host channel adapter type
|
|
|
|
board_id: (RO) Manufacturing board ID
|
|
=============== ===============================
|
|
|
|
|
|
What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n>
|
|
What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/admin_guids/<n>
|
|
What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/pkeys/<n>
|
|
What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/mcgs/
|
|
What: /sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/gid_idx/0
|
|
What: /sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/pkey_idx/<n>
|
|
Date: Aug, 2012
|
|
KernelVersion: v3.6.15
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
The sysfs iov directory is used to manage and examine the port
|
|
P_Key and guid paravirtualization. This directory is added only
|
|
for the master -- slaves do not have it.
|
|
|
|
Under iov/ports, the administrator may examine the gid and P_Key
|
|
tables as they are present in the device (and as are seen in the
|
|
"network view" presented to the SM).
|
|
|
|
The "pkeys" and "gids" subdirectories contain one file for each
|
|
entry in the port's P_Key or GID table respectively. For
|
|
example, ports/1/pkeys/10 contains the value at index 10 in port
|
|
1's P_Key table.
|
|
|
|
======================= ==========================================
|
|
gids/<n>: (RO) The physical port gids n = 0..127
|
|
|
|
admin_guids/<n>: (RW) Allows examining or changing the
|
|
administrative state of a given GUID
|
|
n = 0..127
|
|
|
|
pkeys/<n>: (RO) Displays the contents of the physical
|
|
key table n = 0..126
|
|
|
|
mcgs/: (RO) Multicast group table
|
|
|
|
<m>/gid_idx/0: (RO) Display the GID mapping m = 1..2
|
|
|
|
<m>/pkey_idx/<n>: (RW) Writable except for RoCE pkeys.
|
|
m = 1..2, n = 0..126
|
|
|
|
Under the iov/<pci slot number>
|
|
directories, the admin may map the index
|
|
numbers in the physical tables (as under
|
|
iov/ports) to the paravirtualized index
|
|
numbers that guests see.
|
|
|
|
For example, if the administrator, for
|
|
port 1 on guest 2 maps physical pkey
|
|
index 10 to virtual index 1, then that
|
|
guest, whenever it uses its pkey index
|
|
1, will actually be using the real pkey
|
|
index 10.
|
|
======================= ==========================================
|
|
|
|
|
|
What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled
|
|
What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/enable_smi_admin
|
|
Date: May, 2014
|
|
KernelVersion: v3.15.7
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
Enabling QP0 on VFs for selected VF/port. By default, no VFs are
|
|
enabled for QP0 operation.
|
|
|
|
================= ==== ===========================================
|
|
smi_enabled: (RO) Indicates whether smi is currently enabled
|
|
for the indicated VF/port
|
|
|
|
enable_smi_admin: (RW) Used by the admin to request that smi
|
|
capability be enabled or disabled for the
|
|
indicated VF/port. 0 = disable, 1 = enable.
|
|
================= ==== ===========================================
|
|
|
|
The requested enablement will occur at the next reset of the VF
|
|
(e.g. driver restart on the VM which owns the VF).
|
|
|
|
|
|
sysfs interface for Chelsio T4/T5 RDMA driver (cxgb4)
|
|
-----------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/cxgb4_X/hw_rev
|
|
What: /sys/class/infiniband/cxgb4_X/hca_type
|
|
What: /sys/class/infiniband/cxgb4_X/board_id
|
|
Date: Apr, 2010
|
|
KernelVersion: v2.6.35
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
|
|
=============== =============================================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Driver short name. Should normally match
|
|
the name in its bus driver structure (e.g.
|
|
pci_driver::name)
|
|
|
|
board_id: (RO) Manufacturing board id. (Vendor + device
|
|
information)
|
|
=============== =============================================
|
|
|
|
|
|
sysfs interface for Intel IB driver qib
|
|
---------------------------------------
|
|
|
|
What: /sys/class/infiniband/qibX/version
|
|
What: /sys/class/infiniband/qibX/hw_rev
|
|
What: /sys/class/infiniband/qibX/hca_type
|
|
What: /sys/class/infiniband/qibX/board_id
|
|
What: /sys/class/infiniband/qibX/boardversion
|
|
What: /sys/class/infiniband/qibX/nctxts
|
|
What: /sys/class/infiniband/qibX/localbus_info
|
|
What: /sys/class/infiniband/qibX/tempsense
|
|
What: /sys/class/infiniband/qibX/serial
|
|
What: /sys/class/infiniband/qibX/nfreectxts
|
|
What: /sys/class/infiniband/qibX/chip_reset
|
|
Date: May, 2010
|
|
KernelVersion: v2.6.35
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ======================================================
|
|
version: (RO) Display version information of installed software
|
|
and drivers.
|
|
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Host channel adapter type
|
|
|
|
board_id: (RO) Manufacturing board id
|
|
|
|
boardversion: (RO) Current version of the chip architecture
|
|
|
|
nctxts: (RO) Return the number of user ports (contexts)
|
|
available
|
|
|
|
localbus_info: (RO) Human readable localbus info
|
|
|
|
tempsense: (RO) Display temp sense registers in decimal
|
|
|
|
serial: (RO) Serial number of the HCA
|
|
|
|
nfreectxts: (RO) The number of free user ports (contexts)
|
|
available.
|
|
|
|
chip_reset: (WO) Reset the chip if possible by writing
|
|
"reset" to this file. Only allowed if no user
|
|
contexts are open that use chip resources.
|
|
=============== ======================================================
|
|
|
|
|
|
What: /sys/class/infiniband/qibX/ports/<N>/sl2vl/[0-15]
|
|
Date: May, 2010
|
|
KernelVersion: v2.6.35
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
(RO) The directory contains 16 files numbered 0-15 that specify
|
|
the Service Level (SL). Listing the SL files returns the Virtual
|
|
Lane (VL) as programmed by the SL.
|
|
|
|
What: /sys/class/infiniband/qibX/ports/<N>/CCMgtA/cc_settings_bin
|
|
What: /sys/class/infiniband/qibX/ports/<N>/CCMgtA/cc_table_bin
|
|
Date: May, 2010
|
|
KernelVersion: v2.6.35
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
Per-port congestion control. Both are binary attributes.
|
|
|
|
=============== ================================================
|
|
cc_table_bin (RO) Congestion control table size followed by
|
|
table entries.
|
|
|
|
cc_settings_bin (RO) Congestion settings: port control, control
|
|
map and an array of 16 entries for the
|
|
congestion entries - increase, timer, event log
|
|
trigger threshold and the minimum injection rate
|
|
delay.
|
|
=============== ================================================
|
|
|
|
What: /sys/class/infiniband/qibX/ports/<N>/linkstate/loopback
|
|
What: /sys/class/infiniband/qibX/ports/<N>/linkstate/led_override
|
|
What: /sys/class/infiniband/qibX/ports/<N>/linkstate/hrtbt_enable
|
|
What: /sys/class/infiniband/qibX/ports/<N>/linkstate/status
|
|
What: /sys/class/infiniband/qibX/ports/<N>/linkstate/status_str
|
|
Date: May, 2010
|
|
KernelVersion: v2.6.35
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
[to be documented]
|
|
|
|
=============== ===============================================
|
|
loopback: (WO)
|
|
led_override: (WO)
|
|
hrtbt_enable: (RW)
|
|
status: (RO)
|
|
|
|
status_str: (RO) Displays information about the link state,
|
|
possible cable/switch problems, and hardware
|
|
errors. Possible states are- "Initted",
|
|
"Present", "IB_link_up", "IB_configured" or
|
|
"Fatal_Hardware_Error".
|
|
=============== ===============================================
|
|
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rc_resends
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/seq_naks
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rdma_seq
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rnr_naks
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/other_naks
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rc_timeouts
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/look_pkts
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/pkt_drops
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/dma_wait
|
|
What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/unaligned
|
|
Date: May, 2010
|
|
KernelVersion: v2.6.35
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
[to be documented]
|
|
|
|
|
|
sysfs interface for Mellanox Connect-IB HCA driver mlx5
|
|
-------------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/mlx5_X/hw_rev
|
|
What: /sys/class/infiniband/mlx5_X/hca_type
|
|
What: /sys/class/infiniband/mlx5_X/reg_pages
|
|
What: /sys/class/infiniband/mlx5_X/fw_pages
|
|
Date: Jul, 2013
|
|
KernelVersion: v3.11
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
[to be documented]
|
|
|
|
|
|
sysfs interface for Cisco VIC (usNIC) Verbs Driver
|
|
--------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/usnic_X/board_id
|
|
What: /sys/class/infiniband/usnic_X/config
|
|
What: /sys/class/infiniband/usnic_X/qp_per_vf
|
|
What: /sys/class/infiniband/usnic_X/max_vf
|
|
What: /sys/class/infiniband/usnic_X/cq_per_vf
|
|
What: /sys/class/infiniband/usnic_X/iface
|
|
Date: Sep, 2013
|
|
KernelVersion: v3.14
|
|
Contact: Christian Benvenuti <benve@cisco.com>,
|
|
Dave Goodell <dgoodell@cisco.com>,
|
|
linux-rdma@vger.kernel.org
|
|
Description:
|
|
|
|
=============== ===============================================
|
|
board_id: (RO) Manufacturing board id
|
|
|
|
config: (RO) Report the configuration for this PF
|
|
|
|
qp_per_vf: (RO) Queue pairs per virtual function.
|
|
|
|
max_vf: (RO) Max virtual functions
|
|
|
|
cq_per_vf: (RO) Completion queue per virtual function
|
|
|
|
iface: (RO) Shows which network interface this usNIC
|
|
entry is associated to (visible with ifconfig).
|
|
=============== ===============================================
|
|
|
|
What: /sys/class/infiniband/usnic_X/qpn/summary
|
|
What: /sys/class/infiniband/usnic_X/qpn/context
|
|
Date: Sep, 2013
|
|
KernelVersion: v3.14
|
|
Contact: Christian Benvenuti <benve@cisco.com>,
|
|
Dave Goodell <dgoodell@cisco.com>,
|
|
linux-rdma@vger.kernel.org
|
|
Description:
|
|
[to be documented]
|
|
|
|
|
|
sysfs interface for Emulex RoCE HCA Driver
|
|
------------------------------------------
|
|
|
|
What: /sys/class/infiniband/ocrdmaX/hw_rev
|
|
Date: Feb, 2014
|
|
KernelVersion: v3.14
|
|
Description:
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
What: /sys/class/infiniband/ocrdmaX/hca_type
|
|
Date: Jun, 2014
|
|
KernelVersion: v3.16
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
hca_type: (RO) Display FW version
|
|
|
|
|
|
sysfs interface for Intel Omni-Path driver (HFI1)
|
|
-------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/hfi1_X/hw_rev
|
|
What: /sys/class/infiniband/hfi1_X/board_id
|
|
What: /sys/class/infiniband/hfi1_X/nctxts
|
|
What: /sys/class/infiniband/hfi1_X/serial
|
|
What: /sys/class/infiniband/hfi1_X/chip_reset
|
|
What: /sys/class/infiniband/hfi1_X/boardversion
|
|
What: /sys/class/infiniband/hfi1_X/nfreectxts
|
|
What: /sys/class/infiniband/hfi1_X/tempsense
|
|
Date: May, 2016
|
|
KernelVersion: v4.6
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== =============================================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
board_id: (RO) Manufacturing board id
|
|
|
|
nctxts: (RO) Total contexts available.
|
|
|
|
serial: (RO) Board serial number
|
|
|
|
chip_reset: (WO) Write "reset" to this file to reset the
|
|
chip if possible. Only allowed if no user
|
|
contexts are open that use chip resources.
|
|
|
|
boardversion: (RO) Human readable board info
|
|
|
|
nfreectxts: (RO) The number of free user ports (contexts)
|
|
available.
|
|
|
|
tempsense: (RO) Thermal sense information
|
|
=============== =============================================
|
|
|
|
|
|
What: /sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_settings_bin
|
|
What: /sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_table_bin
|
|
What: /sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_prescan
|
|
Date: May, 2016
|
|
KernelVersion: v4.6
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
Per-port congestion control.
|
|
|
|
=============== ================================================
|
|
cc_table_bin (RO) CCA tables used by PSM2 Congestion control
|
|
table size followed by table entries. Binary
|
|
attribute.
|
|
|
|
cc_settings_bin (RO) Congestion settings: port control, control
|
|
map and an array of 16 entries for the
|
|
congestion entries - increase, timer, event log
|
|
trigger threshold and the minimum injection rate
|
|
delay. Binary attribute.
|
|
|
|
cc_prescan (RW) enable prescanning for faster BECN
|
|
response. Write "on" to enable and "off" to
|
|
disable.
|
|
=============== ================================================
|
|
|
|
What: /sys/class/infiniband/hfi1_X/ports/<N>/sc2vl/[0-31]
|
|
What: /sys/class/infiniband/hfi1_X/ports/<N>/sl2sc/[0-31]
|
|
What: /sys/class/infiniband/hfi1_X/ports/<N>/vl2mtu/[0-15]
|
|
Date: May, 2016
|
|
KernelVersion: v4.6
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ===================================================
|
|
sc2vl/: (RO) 32 files (0 - 31) used to translate sl->vl
|
|
|
|
sl2sc/: (RO) 32 files (0 - 31) used to translate sl->sc
|
|
|
|
vl2mtu/: (RO) 16 files (0 - 15) used to determine MTU for vl
|
|
=============== ===================================================
|
|
|
|
|
|
What: /sys/class/infiniband/hfi1_X/sdma_<N>/cpu_list
|
|
What: /sys/class/infiniband/hfi1_X/sdma_<N>/vl
|
|
Date: Sept, 2016
|
|
KernelVersion: v4.8
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
sdma<N>/ contains one directory per sdma engine (0 - 15)
|
|
|
|
=============== ==============================================
|
|
cpu_list: (RW) List of cpus for user-process to sdma
|
|
engine assignment.
|
|
|
|
vl: (RO) Displays the virtual lane (vl) the sdma
|
|
engine maps to.
|
|
=============== ==============================================
|
|
|
|
This interface gives the user control on the affinity settings
|
|
for the device. As an example, to set an sdma engine irq
|
|
affinity and thread affinity of a user processes to use the
|
|
sdma engine, which is "near" in terms of NUMA configuration, or
|
|
physical cpu location, the user will do::
|
|
|
|
echo "3" > /proc/irq/<N>/smp_affinity_list
|
|
echo "4-7" > /sys/devices/.../sdma3/cpu_list
|
|
cat /sys/devices/.../sdma3/vl
|
|
0
|
|
echo "8" > /proc/irq/<M>/smp_affinity_list
|
|
echo "9-12" > /sys/devices/.../sdma4/cpu_list
|
|
cat /sys/devices/.../sdma4/vl
|
|
1
|
|
|
|
to make sure that when a process runs on cpus 4,5,6, or 7, and
|
|
uses vl=0, then sdma engine 3 is selected by the driver, and
|
|
also the interrupt of the sdma engine 3 is steered to cpu 3.
|
|
Similarly, when a process runs on cpus 9,10,11, or 12 and sets
|
|
vl=1, then engine 4 will be selected and the irq of the sdma
|
|
engine 4 is steered to cpu 8. This assumes that in the above N
|
|
is the irq number of "sdma3", and M is irq number of "sdma4" in
|
|
the /proc/interrupts file.
|
|
|
|
sysfs interface for QLogic qedr NIC Driver
|
|
------------------------------------------
|
|
|
|
What: /sys/class/infiniband/qedrX/hw_rev
|
|
What: /sys/class/infiniband/qedrX/hca_type
|
|
Date: Oct, 2016
|
|
KernelVersion: v4.10
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
|
|
=============== ==== ========================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Display HCA type
|
|
=============== ==== ========================
|
|
|
|
|
|
sysfs interface for VMware Paravirtual RDMA driver
|
|
--------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/vmw_pvrdmaX/hw_rev
|
|
What: /sys/class/infiniband/vmw_pvrdmaX/hca_type
|
|
What: /sys/class/infiniband/vmw_pvrdmaX/board_id
|
|
Date: Oct, 2016
|
|
KernelVersion: v4.10
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
|
|
=============== ==== =====================================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Host channel adapter type
|
|
|
|
board_id: (RO) Display PVRDMA manufacturing board ID
|
|
=============== ==== =====================================
|
|
|
|
|
|
sysfs interface for Broadcom NetXtreme-E RoCE driver
|
|
----------------------------------------------------
|
|
|
|
What: /sys/class/infiniband/bnxt_reX/hw_rev
|
|
What: /sys/class/infiniband/bnxt_reX/hca_type
|
|
Date: Feb, 2017
|
|
KernelVersion: v4.11
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description:
|
|
=============== ==== =========================
|
|
hw_rev: (RO) Hardware revision number
|
|
|
|
hca_type: (RO) Host channel adapter type
|
|
=============== ==== =========================
|