673 lines
19 KiB
C
673 lines
19 KiB
C
|
/* SPDX-License-Identifier: GPL-2.0-only */
|
||
|
|
/*
|
||
|
|
* consumer.h -- SoC Regulator consumer support.
|
||
|
|
*
|
||
|
|
* Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
|
||
|
|
*
|
||
|
|
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
|
||
|
|
*
|
||
|
|
* Regulator Consumer Interface.
|
||
|
|
*
|
||
|
|
* A Power Management Regulator framework for SoC based devices.
|
||
|
|
* Features:-
|
||
|
|
* o Voltage and current level control.
|
||
|
|
* o Operating mode control.
|
||
|
|
* o Regulator status.
|
||
|
|
* o sysfs entries for showing client devices and status
|
||
|
|
*
|
||
|
|
* EXPERIMENTAL FEATURES:
|
||
|
|
* Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
|
||
|
|
* to use most efficient operating mode depending upon voltage and load and
|
||
|
|
* is transparent to client drivers.
|
||
|
|
*
|
||
|
|
* e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
|
||
|
|
* IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
|
||
|
|
* idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
|
||
|
|
* but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
|
||
|
|
* efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
|
||
|
|
* in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __LINUX_REGULATOR_CONSUMER_H_
|
||
|
|
#define __LINUX_REGULATOR_CONSUMER_H_
|
||
|
|
|
||
|
|
#include <linux/err.h>
|
||
|
|
#include <linux/suspend.h>
|
||
|
|
#include <regulator/regulator.h>
|
||
|
|
|
||
|
|
struct device;
|
||
|
|
struct notifier_block;
|
||
|
|
struct regmap;
|
||
|
|
struct regulator_dev;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Regulator operating modes.
|
||
|
|
*
|
||
|
|
* Regulators can run in a variety of different operating modes depending on
|
||
|
|
* output load. This allows further system power savings by selecting the
|
||
|
|
* best (and most efficient) regulator mode for a desired load.
|
||
|
|
*
|
||
|
|
* Most drivers will only care about NORMAL. The modes below are generic and
|
||
|
|
* will probably not match the naming convention of your regulator data sheet
|
||
|
|
* but should match the use cases in the datasheet.
|
||
|
|
*
|
||
|
|
* In order of power efficiency (least efficient at top).
|
||
|
|
*
|
||
|
|
* Mode Description
|
||
|
|
* FAST Regulator can handle fast changes in it's load.
|
||
|
|
* e.g. useful in CPU voltage & frequency scaling where
|
||
|
|
* load can quickly increase with CPU frequency increases.
|
||
|
|
*
|
||
|
|
* NORMAL Normal regulator power supply mode. Most drivers will
|
||
|
|
* use this mode.
|
||
|
|
*
|
||
|
|
* IDLE Regulator runs in a more efficient mode for light
|
||
|
|
* loads. Can be used for devices that have a low power
|
||
|
|
* requirement during periods of inactivity. This mode
|
||
|
|
* may be more noisy than NORMAL and may not be able
|
||
|
|
* to handle fast load switching.
|
||
|
|
*
|
||
|
|
* STANDBY Regulator runs in the most efficient mode for very
|
||
|
|
* light loads. Can be used by devices when they are
|
||
|
|
* in a sleep/standby state. This mode is likely to be
|
||
|
|
* the most noisy and may not be able to handle fast load
|
||
|
|
* switching.
|
||
|
|
*
|
||
|
|
* NOTE: Most regulators will only support a subset of these modes. Some
|
||
|
|
* will only just support NORMAL.
|
||
|
|
*
|
||
|
|
* These modes can be OR'ed together to make up a mask of valid register modes.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define REGULATOR_MODE_INVALID 0x0
|
||
|
|
#define REGULATOR_MODE_FAST 0x1
|
||
|
|
#define REGULATOR_MODE_NORMAL 0x2
|
||
|
|
#define REGULATOR_MODE_IDLE 0x4
|
||
|
|
#define REGULATOR_MODE_STANDBY 0x8
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Regulator errors that can be queried using regulator_get_error_flags
|
||
|
|
*
|
||
|
|
* UNDER_VOLTAGE Regulator output is under voltage.
|
||
|
|
* OVER_CURRENT Regulator output current is too high.
|
||
|
|
* REGULATION_OUT Regulator output is out of regulation.
|
||
|
|
* FAIL Regulator output has failed.
|
||
|
|
* OVER_TEMP Regulator over temp.
|
||
|
|
*
|
||
|
|
* NOTE: These errors can be OR'ed together.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define REGULATOR_ERROR_UNDER_VOLTAGE BIT(1)
|
||
|
|
#define REGULATOR_ERROR_OVER_CURRENT BIT(2)
|
||
|
|
#define REGULATOR_ERROR_REGULATION_OUT BIT(3)
|
||
|
|
#define REGULATOR_ERROR_FAIL BIT(4)
|
||
|
|
#define REGULATOR_ERROR_OVER_TEMP BIT(5)
|
||
|
|
|
||
|
|
#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6)
|
||
|
|
#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7)
|
||
|
|
#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8)
|
||
|
|
#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
|
||
|
|
*
|
||
|
|
* @old_uV: Current voltage before change.
|
||
|
|
* @min_uV: Min voltage we'll change to.
|
||
|
|
* @max_uV: Max voltage we'll change to.
|
||
|
|
*/
|
||
|
|
struct pre_voltage_change_data {
|
||
|
|
unsigned long old_uV;
|
||
|
|
unsigned long min_uV;
|
||
|
|
unsigned long max_uV;
|
||
|
|
};
|
||
|
|
|
||
|
|
struct regulator;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* struct regulator_bulk_data - Data used for bulk regulator operations.
|
||
|
|
*
|
||
|
|
* @supply: The name of the supply. Initialised by the user before
|
||
|
|
* using the bulk regulator APIs.
|
||
|
|
* @init_load_uA: After getting the regulator, regulator_set_load() will be
|
||
|
|
* called with this load. Initialised by the user before
|
||
|
|
* using the bulk regulator APIs.
|
||
|
|
* @consumer: The regulator consumer for the supply. This will be managed
|
||
|
|
* by the bulk API.
|
||
|
|
*
|
||
|
|
* The regulator APIs provide a series of regulator_bulk_() API calls as
|
||
|
|
* a convenience to consumers which require multiple supplies. This
|
||
|
|
* structure is used to manage data for these calls.
|
||
|
|
*/
|
||
|
|
struct regulator_bulk_data {
|
||
|
|
const char *supply;
|
||
|
|
int init_load_uA;
|
||
|
|
struct regulator *consumer;
|
||
|
|
|
||
|
|
/* private: Internal use */
|
||
|
|
int ret;
|
||
|
|
};
|
||
|
|
|
||
|
|
#if defined(CONFIG_REGULATOR)
|
||
|
|
|
||
|
|
/* regulator get and put */
|
||
|
|
struct regulator *__must_check regulator_get(struct device *dev,
|
||
|
|
const char *id);
|
||
|
|
struct regulator *__must_check devm_regulator_get(struct device *dev,
|
||
|
|
const char *id);
|
||
|
|
struct regulator *__must_check regulator_get_exclusive(struct device *dev,
|
||
|
|
const char *id);
|
||
|
|
struct regulator *__must_check devm_regulator_get_exclusive(struct device *dev,
|
||
|
|
const char *id);
|
||
|
|
struct regulator *__must_check regulator_get_optional(struct device *dev,
|
||
|
|
const char *id);
|
||
|
|
struct regulator *__must_check devm_regulator_get_optional(struct device *dev,
|
||
|
|
const char *id);
|
||
|
|
int devm_regulator_get_enable(struct device *dev, const char *id);
|
||
|
|
int devm_regulator_get_enable_optional(struct device *dev, const char *id);
|
||
|
|
void regulator_put(struct regulator *regulator);
|
||
|
|
void devm_regulator_put(struct regulator *regulator);
|
||
|
|
|
||
|
|
int regulator_register_supply_alias(struct device *dev, const char *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *alias_id);
|
||
|
|
void regulator_unregister_supply_alias(struct device *dev, const char *id);
|
||
|
|
|
||
|
|
int regulator_bulk_register_supply_alias(struct device *dev,
|
||
|
|
const char *const *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *const *alias_id,
|
||
|
|
int num_id);
|
||
|
|
void regulator_bulk_unregister_supply_alias(struct device *dev,
|
||
|
|
const char * const *id, int num_id);
|
||
|
|
|
||
|
|
int devm_regulator_register_supply_alias(struct device *dev, const char *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *alias_id);
|
||
|
|
|
||
|
|
int devm_regulator_bulk_register_supply_alias(struct device *dev,
|
||
|
|
const char *const *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *const *alias_id,
|
||
|
|
int num_id);
|
||
|
|
|
||
|
|
/* regulator output control and status */
|
||
|
|
int __must_check regulator_enable(struct regulator *regulator);
|
||
|
|
int regulator_disable(struct regulator *regulator);
|
||
|
|
int regulator_force_disable(struct regulator *regulator);
|
||
|
|
int regulator_is_enabled(struct regulator *regulator);
|
||
|
|
int regulator_disable_deferred(struct regulator *regulator, int ms);
|
||
|
|
|
||
|
|
int __must_check regulator_bulk_get(struct device *dev, int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
int __must_check of_regulator_bulk_get_all(struct device *dev, struct device_node *np,
|
||
|
|
struct regulator_bulk_data **consumers);
|
||
|
|
int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
void devm_regulator_bulk_put(struct regulator_bulk_data *consumers);
|
||
|
|
int __must_check devm_regulator_bulk_get_exclusive(struct device *dev, int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
int __must_check devm_regulator_bulk_get_const(
|
||
|
|
struct device *dev, int num_consumers,
|
||
|
|
const struct regulator_bulk_data *in_consumers,
|
||
|
|
struct regulator_bulk_data **out_consumers);
|
||
|
|
int __must_check regulator_bulk_enable(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
int devm_regulator_bulk_get_enable(struct device *dev, int num_consumers,
|
||
|
|
const char * const *id);
|
||
|
|
int regulator_bulk_disable(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
int regulator_bulk_force_disable(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
void regulator_bulk_free(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers);
|
||
|
|
|
||
|
|
int regulator_count_voltages(struct regulator *regulator);
|
||
|
|
int regulator_list_voltage(struct regulator *regulator, unsigned selector);
|
||
|
|
int regulator_is_supported_voltage(struct regulator *regulator,
|
||
|
|
int min_uV, int max_uV);
|
||
|
|
unsigned int regulator_get_linear_step(struct regulator *regulator);
|
||
|
|
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
|
||
|
|
int regulator_set_voltage_time(struct regulator *regulator,
|
||
|
|
int old_uV, int new_uV);
|
||
|
|
int regulator_get_voltage(struct regulator *regulator);
|
||
|
|
int regulator_sync_voltage(struct regulator *regulator);
|
||
|
|
int regulator_set_current_limit(struct regulator *regulator,
|
||
|
|
int min_uA, int max_uA);
|
||
|
|
int regulator_get_current_limit(struct regulator *regulator);
|
||
|
|
|
||
|
|
int regulator_set_mode(struct regulator *regulator, unsigned int mode);
|
||
|
|
unsigned int regulator_get_mode(struct regulator *regulator);
|
||
|
|
int regulator_get_error_flags(struct regulator *regulator,
|
||
|
|
unsigned int *flags);
|
||
|
|
int regulator_set_load(struct regulator *regulator, int load_uA);
|
||
|
|
|
||
|
|
int regulator_allow_bypass(struct regulator *regulator, bool allow);
|
||
|
|
|
||
|
|
struct regmap *regulator_get_regmap(struct regulator *regulator);
|
||
|
|
int regulator_get_hardware_vsel_register(struct regulator *regulator,
|
||
|
|
unsigned *vsel_reg,
|
||
|
|
unsigned *vsel_mask);
|
||
|
|
int regulator_list_hardware_vsel(struct regulator *regulator,
|
||
|
|
unsigned selector);
|
||
|
|
|
||
|
|
/* regulator notifier block */
|
||
|
|
int regulator_register_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb);
|
||
|
|
int devm_regulator_register_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb);
|
||
|
|
int regulator_unregister_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb);
|
||
|
|
void devm_regulator_unregister_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb);
|
||
|
|
|
||
|
|
/* regulator suspend */
|
||
|
|
int regulator_suspend_enable(struct regulator_dev *rdev,
|
||
|
|
suspend_state_t state);
|
||
|
|
int regulator_suspend_disable(struct regulator_dev *rdev,
|
||
|
|
suspend_state_t state);
|
||
|
|
int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV,
|
||
|
|
int max_uV, suspend_state_t state);
|
||
|
|
|
||
|
|
/* driver data - core doesn't touch */
|
||
|
|
void *regulator_get_drvdata(struct regulator *regulator);
|
||
|
|
void regulator_set_drvdata(struct regulator *regulator, void *data);
|
||
|
|
|
||
|
|
/* misc helpers */
|
||
|
|
|
||
|
|
void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
|
||
|
|
const char *const *supply_names,
|
||
|
|
unsigned int num_supplies);
|
||
|
|
|
||
|
|
bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2);
|
||
|
|
|
||
|
|
#else
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Make sure client drivers will still build on systems with no software
|
||
|
|
* controllable voltage or current regulators.
|
||
|
|
*/
|
||
|
|
static inline struct regulator *__must_check regulator_get(struct device *dev,
|
||
|
|
const char *id)
|
||
|
|
{
|
||
|
|
/* Nothing except the stubbed out regulator API should be
|
||
|
|
* looking at the value except to check if it is an error
|
||
|
|
* value. Drivers are free to handle NULL specifically by
|
||
|
|
* skipping all regulator API calls, but they don't have to.
|
||
|
|
* Drivers which don't, should make sure they properly handle
|
||
|
|
* corner cases of the API, such as regulator_get_voltage()
|
||
|
|
* returning 0.
|
||
|
|
*/
|
||
|
|
return NULL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline struct regulator *__must_check
|
||
|
|
devm_regulator_get(struct device *dev, const char *id)
|
||
|
|
{
|
||
|
|
return NULL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline struct regulator *__must_check
|
||
|
|
regulator_get_exclusive(struct device *dev, const char *id)
|
||
|
|
{
|
||
|
|
return ERR_PTR(-ENODEV);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline struct regulator *__must_check
|
||
|
|
devm_regulator_get_exclusive(struct device *dev, const char *id)
|
||
|
|
{
|
||
|
|
return ERR_PTR(-ENODEV);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_get_enable(struct device *dev, const char *id)
|
||
|
|
{
|
||
|
|
return -ENODEV;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_get_enable_optional(struct device *dev,
|
||
|
|
const char *id)
|
||
|
|
{
|
||
|
|
return -ENODEV;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline struct regulator *__must_check
|
||
|
|
regulator_get_optional(struct device *dev, const char *id)
|
||
|
|
{
|
||
|
|
return ERR_PTR(-ENODEV);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
static inline struct regulator *__must_check
|
||
|
|
devm_regulator_get_optional(struct device *dev, const char *id)
|
||
|
|
{
|
||
|
|
return ERR_PTR(-ENODEV);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void regulator_put(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void devm_regulator_put(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void devm_regulator_bulk_put(struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_register_supply_alias(struct device *dev,
|
||
|
|
const char *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *alias_id)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void regulator_unregister_supply_alias(struct device *dev,
|
||
|
|
const char *id)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_bulk_register_supply_alias(struct device *dev,
|
||
|
|
const char *const *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char * const *alias_id,
|
||
|
|
int num_id)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void regulator_bulk_unregister_supply_alias(struct device *dev,
|
||
|
|
const char * const *id,
|
||
|
|
int num_id)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_register_supply_alias(struct device *dev,
|
||
|
|
const char *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *alias_id)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_bulk_register_supply_alias(struct device *dev,
|
||
|
|
const char *const *id,
|
||
|
|
struct device *alias_dev,
|
||
|
|
const char *const *alias_id,
|
||
|
|
int num_id)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_enable(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_disable(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_force_disable(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_disable_deferred(struct regulator *regulator,
|
||
|
|
int ms)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_is_enabled(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_bulk_get(struct device *dev,
|
||
|
|
int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int of_regulator_bulk_get_all(struct device *dev, struct device_node *np,
|
||
|
|
struct regulator_bulk_data **consumers)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_bulk_enable(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_bulk_get_enable(struct device *dev,
|
||
|
|
int num_consumers,
|
||
|
|
const char * const *id)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_bulk_disable(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_bulk_force_disable(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void regulator_bulk_free(int num_consumers,
|
||
|
|
struct regulator_bulk_data *consumers)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_voltage(struct regulator *regulator,
|
||
|
|
int min_uV, int max_uV)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_voltage_time(struct regulator *regulator,
|
||
|
|
int old_uV, int new_uV)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_get_voltage(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_sync_voltage(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_is_supported_voltage(struct regulator *regulator,
|
||
|
|
int min_uV, int max_uV)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline unsigned int regulator_get_linear_step(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_current_limit(struct regulator *regulator,
|
||
|
|
int min_uA, int max_uA)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_get_current_limit(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_mode(struct regulator *regulator,
|
||
|
|
unsigned int mode)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline unsigned int regulator_get_mode(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return REGULATOR_MODE_NORMAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_get_error_flags(struct regulator *regulator,
|
||
|
|
unsigned int *flags)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_load(struct regulator *regulator, int load_uA)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_allow_bypass(struct regulator *regulator,
|
||
|
|
bool allow)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline struct regmap *regulator_get_regmap(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return ERR_PTR(-EOPNOTSUPP);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_get_hardware_vsel_register(struct regulator *regulator,
|
||
|
|
unsigned *vsel_reg,
|
||
|
|
unsigned *vsel_mask)
|
||
|
|
{
|
||
|
|
return -EOPNOTSUPP;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_list_hardware_vsel(struct regulator *regulator,
|
||
|
|
unsigned selector)
|
||
|
|
{
|
||
|
|
return -EOPNOTSUPP;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_register_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_register_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_unregister_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int devm_regulator_unregister_notifier(struct regulator *regulator,
|
||
|
|
struct notifier_block *nb)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_suspend_enable(struct regulator_dev *rdev,
|
||
|
|
suspend_state_t state)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_suspend_disable(struct regulator_dev *rdev,
|
||
|
|
suspend_state_t state)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_suspend_voltage(struct regulator *regulator,
|
||
|
|
int min_uV, int max_uV,
|
||
|
|
suspend_state_t state)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void *regulator_get_drvdata(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return NULL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void regulator_set_drvdata(struct regulator *regulator,
|
||
|
|
void *data)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_count_voltages(struct regulator *regulator)
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_list_voltage(struct regulator *regulator, unsigned selector)
|
||
|
|
{
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void
|
||
|
|
regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
|
||
|
|
const char *const *supply_names,
|
||
|
|
unsigned int num_supplies)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline bool
|
||
|
|
regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
|
||
|
|
{
|
||
|
|
return false;
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
static inline int regulator_set_voltage_triplet(struct regulator *regulator,
|
||
|
|
int min_uV, int target_uV,
|
||
|
|
int max_uV)
|
||
|
|
{
|
||
|
|
if (regulator_set_voltage(regulator, target_uV, max_uV) == 0)
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
return regulator_set_voltage(regulator, min_uV, max_uV);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_set_voltage_tol(struct regulator *regulator,
|
||
|
|
int new_uV, int tol_uV)
|
||
|
|
{
|
||
|
|
if (regulator_set_voltage(regulator, new_uV, new_uV + tol_uV) == 0)
|
||
|
|
return 0;
|
||
|
|
else
|
||
|
|
return regulator_set_voltage(regulator,
|
||
|
|
new_uV - tol_uV, new_uV + tol_uV);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline int regulator_is_supported_voltage_tol(struct regulator *regulator,
|
||
|
|
int target_uV, int tol_uV)
|
||
|
|
{
|
||
|
|
return regulator_is_supported_voltage(regulator,
|
||
|
|
target_uV - tol_uV,
|
||
|
|
target_uV + tol_uV);
|
||
|
|
}
|
||
|
|
|
||
|
|
#endif
|