mirror_ubuntu-kernels/include/linux/mfd/intel-m10-bmc.h

309 lines
9.8 KiB
C
Raw Normal View History

2024-07-02 00:48:40 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Intel MAX 10 Board Management Controller chip.
*
* Copyright (C) 2018-2020 Intel Corporation, Inc.
*/
#ifndef __MFD_INTEL_M10_BMC_H
#define __MFD_INTEL_M10_BMC_H
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/dev_printk.h>
#include <linux/regmap.h>
#include <linux/rwsem.h>
#define M10BMC_N3000_LEGACY_BUILD_VER 0x300468
#define M10BMC_N3000_SYS_BASE 0x300800
#define M10BMC_N3000_SYS_END 0x300fff
#define M10BMC_N3000_FLASH_BASE 0x10000000
#define M10BMC_N3000_FLASH_END 0x1fffffff
#define M10BMC_N3000_MEM_END M10BMC_N3000_FLASH_END
#define M10BMC_STAGING_BASE 0x18000000
#define M10BMC_STAGING_SIZE 0x3800000
/* Register offset of system registers */
#define NIOS2_N3000_FW_VERSION 0x0
#define M10BMC_N3000_MAC_LOW 0x10
#define M10BMC_N3000_MAC_BYTE4 GENMASK(7, 0)
#define M10BMC_N3000_MAC_BYTE3 GENMASK(15, 8)
#define M10BMC_N3000_MAC_BYTE2 GENMASK(23, 16)
#define M10BMC_N3000_MAC_BYTE1 GENMASK(31, 24)
#define M10BMC_N3000_MAC_HIGH 0x14
#define M10BMC_N3000_MAC_BYTE6 GENMASK(7, 0)
#define M10BMC_N3000_MAC_BYTE5 GENMASK(15, 8)
#define M10BMC_N3000_MAC_COUNT GENMASK(23, 16)
#define M10BMC_N3000_TEST_REG 0x3c
#define M10BMC_N3000_BUILD_VER 0x68
#define M10BMC_N3000_VER_MAJOR_MSK GENMASK(23, 16)
#define M10BMC_N3000_VER_PCB_INFO_MSK GENMASK(31, 24)
#define M10BMC_N3000_VER_LEGACY_INVALID 0xffffffff
/* Telemetry registers */
#define M10BMC_N3000_TELEM_START 0x100
#define M10BMC_N3000_TELEM_END 0x250
#define M10BMC_D5005_TELEM_END 0x300
/* Secure update doorbell register, in system register region */
#define M10BMC_N3000_DOORBELL 0x400
/* Authorization Result register, in system register region */
#define M10BMC_N3000_AUTH_RESULT 0x404
/* Doorbell register fields */
#define DRBL_RSU_REQUEST BIT(0)
#define DRBL_RSU_PROGRESS GENMASK(7, 4)
#define DRBL_HOST_STATUS GENMASK(11, 8)
#define DRBL_RSU_STATUS GENMASK(23, 16)
#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24)
#define DRBL_PKVL1_POLL_EN BIT(25)
#define DRBL_PKVL2_POLL_EN BIT(26)
#define DRBL_CONFIG_SEL BIT(28)
#define DRBL_REBOOT_REQ BIT(29)
#define DRBL_REBOOT_DISABLED BIT(30)
/* Progress states */
#define RSU_PROG_IDLE 0x0
#define RSU_PROG_PREPARE 0x1
#define RSU_PROG_READY 0x3
#define RSU_PROG_AUTHENTICATING 0x4
#define RSU_PROG_COPYING 0x5
#define RSU_PROG_UPDATE_CANCEL 0x6
#define RSU_PROG_PROGRAM_KEY_HASH 0x7
#define RSU_PROG_RSU_DONE 0x8
#define RSU_PROG_PKVL_PROM_DONE 0x9
/* Device and error states */
#define RSU_STAT_NORMAL 0x0
#define RSU_STAT_TIMEOUT 0x1
#define RSU_STAT_AUTH_FAIL 0x2
#define RSU_STAT_COPY_FAIL 0x3
#define RSU_STAT_FATAL 0x4
#define RSU_STAT_PKVL_REJECT 0x5
#define RSU_STAT_NON_INC 0x6
#define RSU_STAT_ERASE_FAIL 0x7
#define RSU_STAT_WEAROUT 0x8
#define RSU_STAT_NIOS_OK 0x80
#define RSU_STAT_USER_OK 0x81
#define RSU_STAT_FACTORY_OK 0x82
#define RSU_STAT_USER_FAIL 0x83
#define RSU_STAT_FACTORY_FAIL 0x84
#define RSU_STAT_NIOS_FLASH_ERR 0x85
#define RSU_STAT_FPGA_FLASH_ERR 0x86
#define HOST_STATUS_IDLE 0x0
#define HOST_STATUS_WRITE_DONE 0x1
#define HOST_STATUS_ABORT_RSU 0x2
#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
/* interval 100ms and timeout 5s */
#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000)
/* RSU PREP Timeout (2 minutes) to erase flash staging area */
#define RSU_PREP_INTERVAL_MS 100
#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000)
/* RSU Complete Timeout (40 minutes) for full flash update */
#define RSU_COMPLETE_INTERVAL_MS 1000
#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
/* Addresses for security related data in FLASH */
#define M10BMC_N3000_BMC_REH_ADDR 0x17ffc004
#define M10BMC_N3000_BMC_PROG_ADDR 0x17ffc000
#define M10BMC_N3000_BMC_PROG_MAGIC 0x5746
#define M10BMC_N3000_SR_REH_ADDR 0x17ffd004
#define M10BMC_N3000_SR_PROG_ADDR 0x17ffd000
#define M10BMC_N3000_SR_PROG_MAGIC 0x5253
#define M10BMC_N3000_PR_REH_ADDR 0x17ffe004
#define M10BMC_N3000_PR_PROG_ADDR 0x17ffe000
#define M10BMC_N3000_PR_PROG_MAGIC 0x5250
/* Address of 4KB inverted bit vector containing staging area FLASH count */
#define M10BMC_N3000_STAGING_FLASH_COUNT 0x17ffb000
#define M10BMC_N6000_INDIRECT_BASE 0x400
#define M10BMC_N6000_SYS_BASE 0x0
#define M10BMC_N6000_SYS_END 0xfff
#define M10BMC_N6000_DOORBELL 0x1c0
#define M10BMC_N6000_AUTH_RESULT 0x1c4
#define AUTH_RESULT_RSU_STATUS GENMASK(23, 16)
#define M10BMC_N6000_BUILD_VER 0x0
#define NIOS2_N6000_FW_VERSION 0x4
#define M10BMC_N6000_MAC_LOW 0x20
#define M10BMC_N6000_MAC_HIGH (M10BMC_N6000_MAC_LOW + 4)
/* Addresses for security related data in FLASH */
#define M10BMC_N6000_BMC_REH_ADDR 0x7ffc004
#define M10BMC_N6000_BMC_PROG_ADDR 0x7ffc000
#define M10BMC_N6000_BMC_PROG_MAGIC 0x5746
#define M10BMC_N6000_SR_REH_ADDR 0x7ffd004
#define M10BMC_N6000_SR_PROG_ADDR 0x7ffd000
#define M10BMC_N6000_SR_PROG_MAGIC 0x5253
#define M10BMC_N6000_PR_REH_ADDR 0x7ffe004
#define M10BMC_N6000_PR_PROG_ADDR 0x7ffe000
#define M10BMC_N6000_PR_PROG_MAGIC 0x5250
#define M10BMC_N6000_STAGING_FLASH_COUNT 0x7ff5000
#define M10BMC_N6000_FLASH_MUX_CTRL 0x1d0
#define M10BMC_N6000_FLASH_MUX_SELECTION GENMASK(2, 0)
#define M10BMC_N6000_FLASH_MUX_IDLE 0
#define M10BMC_N6000_FLASH_MUX_NIOS 1
#define M10BMC_N6000_FLASH_MUX_HOST 2
#define M10BMC_N6000_FLASH_MUX_PFL 4
#define get_flash_mux(mux) FIELD_GET(M10BMC_N6000_FLASH_MUX_SELECTION, mux)
#define M10BMC_N6000_FLASH_NIOS_REQUEST BIT(4)
#define M10BMC_N6000_FLASH_HOST_REQUEST BIT(5)
#define M10BMC_N6000_FLASH_CTRL 0x40
#define M10BMC_N6000_FLASH_WR_MODE BIT(0)
#define M10BMC_N6000_FLASH_RD_MODE BIT(1)
#define M10BMC_N6000_FLASH_BUSY BIT(2)
#define M10BMC_N6000_FLASH_FIFO_SPACE GENMASK(13, 4)
#define M10BMC_N6000_FLASH_READ_COUNT GENMASK(25, 16)
#define M10BMC_N6000_FLASH_ADDR 0x44
#define M10BMC_N6000_FLASH_FIFO 0x800
#define M10BMC_N6000_READ_BLOCK_SIZE 0x800
#define M10BMC_N6000_FIFO_MAX_BYTES 0x800
#define M10BMC_N6000_FIFO_WORD_SIZE 4
#define M10BMC_N6000_FIFO_MAX_WORDS (M10BMC_N6000_FIFO_MAX_BYTES / \
M10BMC_N6000_FIFO_WORD_SIZE)
#define M10BMC_FLASH_INT_US 1
#define M10BMC_FLASH_TIMEOUT_US 10000
/**
* struct m10bmc_csr_map - Intel MAX 10 BMC CSR register map
*/
struct m10bmc_csr_map {
unsigned int base;
unsigned int build_version;
unsigned int fw_version;
unsigned int mac_low;
unsigned int mac_high;
unsigned int doorbell;
unsigned int auth_result;
unsigned int bmc_prog_addr;
unsigned int bmc_reh_addr;
unsigned int bmc_magic;
unsigned int sr_prog_addr;
unsigned int sr_reh_addr;
unsigned int sr_magic;
unsigned int pr_prog_addr;
unsigned int pr_reh_addr;
unsigned int pr_magic;
unsigned int rsu_update_counter;
};
/**
* struct intel_m10bmc_platform_info - Intel MAX 10 BMC platform specific information
* @cells: MFD cells
* @n_cells: MFD cells ARRAY_SIZE()
* @handshake_sys_reg_ranges: array of register ranges for fw handshake regs
* @handshake_sys_reg_nranges: number of register ranges for fw handshake regs
* @csr_map: the mappings for register definition of MAX10 BMC
*/
struct intel_m10bmc_platform_info {
struct mfd_cell *cells;
int n_cells;
const struct regmap_range *handshake_sys_reg_ranges;
unsigned int handshake_sys_reg_nranges;
const struct m10bmc_csr_map *csr_map;
};
struct intel_m10bmc;
/**
* struct intel_m10bmc_flash_bulk_ops - device specific operations for flash R/W
* @read: read a block of data from flash
* @write: write a block of data to flash
* @lock_write: locks flash access for erase+write
* @unlock_write: unlock flash access
*
* Write must be protected with @lock_write and @unlock_write. While the flash
* is locked, @read returns -EBUSY.
*/
struct intel_m10bmc_flash_bulk_ops {
int (*read)(struct intel_m10bmc *m10bmc, u8 *buf, u32 addr, u32 size);
int (*write)(struct intel_m10bmc *m10bmc, const u8 *buf, u32 offset, u32 size);
int (*lock_write)(struct intel_m10bmc *m10bmc);
void (*unlock_write)(struct intel_m10bmc *m10bmc);
};
enum m10bmc_fw_state {
M10BMC_FW_STATE_NORMAL,
M10BMC_FW_STATE_SEC_UPDATE_PREPARE,
M10BMC_FW_STATE_SEC_UPDATE_WRITE,
M10BMC_FW_STATE_SEC_UPDATE_PROGRAM,
};
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
* @regmap: the regmap used to access registers by m10bmc itself
* @info: the platform information for MAX10 BMC
* @flash_bulk_ops: optional device specific operations for flash R/W
* @bmcfw_lock: read/write semaphore to BMC firmware running state
* @bmcfw_state: BMC firmware running state. Available only when
* handshake_sys_reg_nranges > 0.
*/
struct intel_m10bmc {
struct device *dev;
struct regmap *regmap;
const struct intel_m10bmc_platform_info *info;
const struct intel_m10bmc_flash_bulk_ops *flash_bulk_ops;
struct rw_semaphore bmcfw_lock; /* Protects bmcfw_state */
enum m10bmc_fw_state bmcfw_state;
};
/*
* register access helper functions.
*
* m10bmc_raw_read - read m10bmc register per addr
* m10bmc_sys_read - read m10bmc system register per offset
* m10bmc_sys_update_bits - update m10bmc system register per offset
*/
static inline int
m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
unsigned int *val)
{
int ret;
ret = regmap_read(m10bmc->regmap, addr, val);
if (ret)
dev_err(m10bmc->dev, "fail to read raw reg %x: %d\n",
addr, ret);
return ret;
}
int m10bmc_sys_read(struct intel_m10bmc *m10bmc, unsigned int offset, unsigned int *val);
int m10bmc_sys_update_bits(struct intel_m10bmc *m10bmc, unsigned int offset,
unsigned int msk, unsigned int val);
/*
* Track the state of the firmware, as it is not available for register
* handshakes during secure updates on some MAX 10 cards.
*/
void m10bmc_fw_state_set(struct intel_m10bmc *m10bmc, enum m10bmc_fw_state new_state);
/*
* MAX10 BMC Core support
*/
int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info);
extern const struct attribute_group *m10bmc_dev_groups[];
#endif /* __MFD_INTEL_M10_BMC_H */