745 lines
20 KiB
C
745 lines
20 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* Driver for Marvell Xenon SDHC as a platform device
|
||
|
*
|
||
|
* Copyright (C) 2016 Marvell, All Rights Reserved.
|
||
|
*
|
||
|
* Author: Hu Ziji <huziji@marvell.com>
|
||
|
* Date: 2016-8-24
|
||
|
*
|
||
|
* Inspired by Jisheng Zhang <jszhang@marvell.com>
|
||
|
* Special thanks to Video BG4 project team.
|
||
|
*/
|
||
|
|
||
|
#include <linux/acpi.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/ktime.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/pm.h>
|
||
|
#include <linux/pm_runtime.h>
|
||
|
#include <linux/mm.h>
|
||
|
#include <linux/dma-mapping.h>
|
||
|
|
||
|
#include "sdhci-pltfm.h"
|
||
|
#include "sdhci-xenon.h"
|
||
|
|
||
|
static int xenon_enable_internal_clk(struct sdhci_host *host)
|
||
|
{
|
||
|
u32 reg;
|
||
|
ktime_t timeout;
|
||
|
|
||
|
reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
|
||
|
reg |= SDHCI_CLOCK_INT_EN;
|
||
|
sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
|
||
|
/* Wait max 20 ms */
|
||
|
timeout = ktime_add_ms(ktime_get(), 20);
|
||
|
while (1) {
|
||
|
bool timedout = ktime_after(ktime_get(), timeout);
|
||
|
|
||
|
reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
||
|
if (reg & SDHCI_CLOCK_INT_STABLE)
|
||
|
break;
|
||
|
if (timedout) {
|
||
|
dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n");
|
||
|
return -ETIMEDOUT;
|
||
|
}
|
||
|
usleep_range(900, 1100);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Set SDCLK-off-while-idle */
|
||
|
static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
|
||
|
unsigned char sdhc_id, bool enable)
|
||
|
{
|
||
|
u32 reg;
|
||
|
u32 mask;
|
||
|
|
||
|
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
|
||
|
/* Get the bit shift basing on the SDHC index */
|
||
|
mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
|
||
|
if (enable)
|
||
|
reg |= mask;
|
||
|
else
|
||
|
reg &= ~mask;
|
||
|
|
||
|
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
|
||
|
}
|
||
|
|
||
|
/* Enable/Disable the Auto Clock Gating function */
|
||
|
static void xenon_set_acg(struct sdhci_host *host, bool enable)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
|
||
|
if (enable)
|
||
|
reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK;
|
||
|
else
|
||
|
reg |= XENON_AUTO_CLKGATE_DISABLE_MASK;
|
||
|
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
|
||
|
}
|
||
|
|
||
|
/* Enable this SDHC */
|
||
|
static void xenon_enable_sdhc(struct sdhci_host *host,
|
||
|
unsigned char sdhc_id)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
|
||
|
reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
|
||
|
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
|
||
|
|
||
|
host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
|
||
|
/*
|
||
|
* Force to clear BUS_TEST to
|
||
|
* skip bus_test_pre and bus_test_post
|
||
|
*/
|
||
|
host->mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
|
||
|
}
|
||
|
|
||
|
/* Disable this SDHC */
|
||
|
static void xenon_disable_sdhc(struct sdhci_host *host,
|
||
|
unsigned char sdhc_id)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
|
||
|
reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
|
||
|
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
|
||
|
}
|
||
|
|
||
|
/* Enable Parallel Transfer Mode */
|
||
|
static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
|
||
|
unsigned char sdhc_id)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
|
||
|
reg |= BIT(sdhc_id);
|
||
|
sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
|
||
|
}
|
||
|
|
||
|
/* Mask command conflict error */
|
||
|
static void xenon_mask_cmd_conflict_err(struct sdhci_host *host)
|
||
|
{
|
||
|
u32 reg;
|
||
|
|
||
|
reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
|
||
|
reg |= XENON_MASK_CMD_CONFLICT_ERR;
|
||
|
sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
|
||
|
}
|
||
|
|
||
|
static void xenon_retune_setup(struct sdhci_host *host)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
u32 reg;
|
||
|
|
||
|
/* Disable the Re-Tuning Request functionality */
|
||
|
reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL);
|
||
|
reg &= ~XENON_RETUNING_COMPATIBLE;
|
||
|
sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL);
|
||
|
|
||
|
/* Disable the Re-tuning Interrupt */
|
||
|
reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
|
||
|
reg &= ~SDHCI_INT_RETUNE;
|
||
|
sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
|
||
|
reg = sdhci_readl(host, SDHCI_INT_ENABLE);
|
||
|
reg &= ~SDHCI_INT_RETUNE;
|
||
|
sdhci_writel(host, reg, SDHCI_INT_ENABLE);
|
||
|
|
||
|
/* Force to use Tuning Mode 1 */
|
||
|
host->tuning_mode = SDHCI_TUNING_MODE_1;
|
||
|
/* Set re-tuning period */
|
||
|
host->tuning_count = 1 << (priv->tuning_count - 1);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Operations inside struct sdhci_ops
|
||
|
*/
|
||
|
/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
|
||
|
static void xenon_reset_exit(struct sdhci_host *host,
|
||
|
unsigned char sdhc_id, u8 mask)
|
||
|
{
|
||
|
/* Only SOFTWARE RESET ALL will clear the register setting */
|
||
|
if (!(mask & SDHCI_RESET_ALL))
|
||
|
return;
|
||
|
|
||
|
/* Disable tuning request and auto-retuning again */
|
||
|
xenon_retune_setup(host);
|
||
|
|
||
|
/*
|
||
|
* The ACG should be turned off at the early init time, in order
|
||
|
* to solve a possible issues with the 1.8V regulator stabilization.
|
||
|
* The feature is enabled in later stage.
|
||
|
*/
|
||
|
xenon_set_acg(host, false);
|
||
|
|
||
|
xenon_set_sdclk_off_idle(host, sdhc_id, false);
|
||
|
|
||
|
xenon_mask_cmd_conflict_err(host);
|
||
|
}
|
||
|
|
||
|
static void xenon_reset(struct sdhci_host *host, u8 mask)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
sdhci_reset(host, mask);
|
||
|
xenon_reset_exit(host, priv->sdhc_id, mask);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Xenon defines different values for HS200 and HS400
|
||
|
* in Host_Control_2
|
||
|
*/
|
||
|
static void xenon_set_uhs_signaling(struct sdhci_host *host,
|
||
|
unsigned int timing)
|
||
|
{
|
||
|
u16 ctrl_2;
|
||
|
|
||
|
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
||
|
/* Select Bus Speed Mode for host */
|
||
|
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
|
||
|
if (timing == MMC_TIMING_MMC_HS200)
|
||
|
ctrl_2 |= XENON_CTRL_HS200;
|
||
|
else if (timing == MMC_TIMING_UHS_SDR104)
|
||
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
|
||
|
else if (timing == MMC_TIMING_UHS_SDR12)
|
||
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
|
||
|
else if (timing == MMC_TIMING_UHS_SDR25)
|
||
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
|
||
|
else if (timing == MMC_TIMING_UHS_SDR50)
|
||
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
|
||
|
else if ((timing == MMC_TIMING_UHS_DDR50) ||
|
||
|
(timing == MMC_TIMING_MMC_DDR52))
|
||
|
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
|
||
|
else if (timing == MMC_TIMING_MMC_HS400)
|
||
|
ctrl_2 |= XENON_CTRL_HS400;
|
||
|
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
|
||
|
}
|
||
|
|
||
|
static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
|
||
|
unsigned short vdd)
|
||
|
{
|
||
|
struct mmc_host *mmc = host->mmc;
|
||
|
u8 pwr = host->pwr;
|
||
|
|
||
|
sdhci_set_power_noreg(host, mode, vdd);
|
||
|
|
||
|
if (host->pwr == pwr)
|
||
|
return;
|
||
|
|
||
|
if (host->pwr == 0)
|
||
|
vdd = 0;
|
||
|
|
||
|
if (!IS_ERR(mmc->supply.vmmc))
|
||
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
|
||
|
}
|
||
|
|
||
|
static void xenon_voltage_switch(struct sdhci_host *host)
|
||
|
{
|
||
|
/* Wait for 5ms after set 1.8V signal enable bit */
|
||
|
usleep_range(5000, 5500);
|
||
|
}
|
||
|
|
||
|
static unsigned int xenon_get_max_clock(struct sdhci_host *host)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
|
||
|
if (pltfm_host->clk)
|
||
|
return sdhci_pltfm_clk_get_max_clock(host);
|
||
|
else
|
||
|
return pltfm_host->clock;
|
||
|
}
|
||
|
|
||
|
static const struct sdhci_ops sdhci_xenon_ops = {
|
||
|
.voltage_switch = xenon_voltage_switch,
|
||
|
.set_clock = sdhci_set_clock,
|
||
|
.set_power = xenon_set_power,
|
||
|
.set_bus_width = sdhci_set_bus_width,
|
||
|
.reset = xenon_reset,
|
||
|
.set_uhs_signaling = xenon_set_uhs_signaling,
|
||
|
.get_max_clock = xenon_get_max_clock,
|
||
|
};
|
||
|
|
||
|
static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
|
||
|
.ops = &sdhci_xenon_ops,
|
||
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
|
||
|
SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
|
||
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Xenon Specific Operations in mmc_host_ops
|
||
|
*/
|
||
|
static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
||
|
{
|
||
|
struct sdhci_host *host = mmc_priv(mmc);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
u32 reg;
|
||
|
|
||
|
/*
|
||
|
* HS400/HS200/eMMC HS doesn't have Preset Value register.
|
||
|
* However, sdhci_set_ios will read HS400/HS200 Preset register.
|
||
|
* Disable Preset Value register for HS400/HS200.
|
||
|
* eMMC HS with preset_enabled set will trigger a bug in
|
||
|
* get_preset_value().
|
||
|
*/
|
||
|
if ((ios->timing == MMC_TIMING_MMC_HS400) ||
|
||
|
(ios->timing == MMC_TIMING_MMC_HS200) ||
|
||
|
(ios->timing == MMC_TIMING_MMC_HS)) {
|
||
|
host->preset_enabled = false;
|
||
|
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
|
||
|
host->flags &= ~SDHCI_PV_ENABLED;
|
||
|
|
||
|
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
||
|
reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
|
||
|
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
|
||
|
} else {
|
||
|
host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
|
||
|
}
|
||
|
|
||
|
sdhci_set_ios(mmc, ios);
|
||
|
xenon_phy_adj(host, ios);
|
||
|
|
||
|
if (host->clock > XENON_DEFAULT_SDCLK_FREQ)
|
||
|
xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
|
||
|
}
|
||
|
|
||
|
static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
|
||
|
struct mmc_ios *ios)
|
||
|
{
|
||
|
struct sdhci_host *host = mmc_priv(mmc);
|
||
|
|
||
|
/*
|
||
|
* Before SD/SDIO set signal voltage, SD bus clock should be
|
||
|
* disabled. However, sdhci_set_clock will also disable the Internal
|
||
|
* clock in mmc_set_signal_voltage().
|
||
|
* If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
|
||
|
* Thus here manually enable internal clock.
|
||
|
*
|
||
|
* After switch completes, it is unnecessary to disable internal clock,
|
||
|
* since keeping internal clock active obeys SD spec.
|
||
|
*/
|
||
|
xenon_enable_internal_clk(host);
|
||
|
|
||
|
xenon_soc_pad_ctrl(host, ios->signal_voltage);
|
||
|
|
||
|
/*
|
||
|
* If Vqmmc is fixed on platform, vqmmc regulator should be unavailable.
|
||
|
* Thus SDHCI_CTRL_VDD_180 bit might not work then.
|
||
|
* Skip the standard voltage switch to avoid any issue.
|
||
|
*/
|
||
|
if (PTR_ERR(mmc->supply.vqmmc) == -ENODEV)
|
||
|
return 0;
|
||
|
|
||
|
return sdhci_start_signal_voltage_switch(mmc, ios);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Update card type.
|
||
|
* priv->init_card_type will be used in PHY timing adjustment.
|
||
|
*/
|
||
|
static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
|
||
|
{
|
||
|
struct sdhci_host *host = mmc_priv(mmc);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
/* Update card type*/
|
||
|
priv->init_card_type = card->type;
|
||
|
}
|
||
|
|
||
|
static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
|
||
|
{
|
||
|
struct sdhci_host *host = mmc_priv(mmc);
|
||
|
|
||
|
if (host->timing == MMC_TIMING_UHS_DDR50 ||
|
||
|
host->timing == MMC_TIMING_MMC_DDR52)
|
||
|
return 0;
|
||
|
|
||
|
/*
|
||
|
* Currently force Xenon driver back to support mode 1 only,
|
||
|
* even though Xenon might claim to support mode 2 or mode 3.
|
||
|
* It requires more time to test mode 2/mode 3 on more platforms.
|
||
|
*/
|
||
|
if (host->tuning_mode != SDHCI_TUNING_MODE_1)
|
||
|
xenon_retune_setup(host);
|
||
|
|
||
|
return sdhci_execute_tuning(mmc, opcode);
|
||
|
}
|
||
|
|
||
|
static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
||
|
{
|
||
|
struct sdhci_host *host = mmc_priv(mmc);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
u32 reg;
|
||
|
u8 sdhc_id = priv->sdhc_id;
|
||
|
|
||
|
sdhci_enable_sdio_irq(mmc, enable);
|
||
|
|
||
|
if (enable) {
|
||
|
/*
|
||
|
* Set SDIO Card Inserted indication
|
||
|
* to enable detecting SDIO async irq.
|
||
|
*/
|
||
|
reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
|
||
|
reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
|
||
|
sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
|
||
|
} else {
|
||
|
/* Clear SDIO Card Inserted indication */
|
||
|
reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
|
||
|
reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
|
||
|
sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
|
||
|
{
|
||
|
host->mmc_host_ops.set_ios = xenon_set_ios;
|
||
|
host->mmc_host_ops.start_signal_voltage_switch =
|
||
|
xenon_start_signal_voltage_switch;
|
||
|
host->mmc_host_ops.init_card = xenon_init_card;
|
||
|
host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
|
||
|
host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Parse Xenon specific DT properties:
|
||
|
* sdhc-id: the index of current SDHC.
|
||
|
* Refer to XENON_SYS_CFG_INFO register
|
||
|
* tun-count: the interval between re-tuning
|
||
|
*/
|
||
|
static int xenon_probe_params(struct platform_device *pdev)
|
||
|
{
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
||
|
struct mmc_host *mmc = host->mmc;
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
u32 sdhc_id, nr_sdhc;
|
||
|
u32 tuning_count;
|
||
|
struct sysinfo si;
|
||
|
|
||
|
/* Disable HS200 on Armada AP806 */
|
||
|
if (priv->hw_version == XENON_AP806)
|
||
|
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
|
||
|
|
||
|
sdhc_id = 0x0;
|
||
|
if (!device_property_read_u32(dev, "marvell,xenon-sdhc-id", &sdhc_id)) {
|
||
|
nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO);
|
||
|
nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK;
|
||
|
if (unlikely(sdhc_id > nr_sdhc)) {
|
||
|
dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
|
||
|
sdhc_id, nr_sdhc);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
priv->sdhc_id = sdhc_id;
|
||
|
|
||
|
tuning_count = XENON_DEF_TUNING_COUNT;
|
||
|
if (!device_property_read_u32(dev, "marvell,xenon-tun-count",
|
||
|
&tuning_count)) {
|
||
|
if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) {
|
||
|
dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
|
||
|
XENON_DEF_TUNING_COUNT);
|
||
|
tuning_count = XENON_DEF_TUNING_COUNT;
|
||
|
}
|
||
|
}
|
||
|
priv->tuning_count = tuning_count;
|
||
|
|
||
|
/*
|
||
|
* AC5/X/IM HW has only 31-bits passed in the crossbar switch.
|
||
|
* If we have more than 2GB of memory, this means we might pass
|
||
|
* memory pointers which are above 2GB and which cannot be properly
|
||
|
* represented. In this case, disable ADMA, 64-bit DMA and allow only SDMA.
|
||
|
* This effectively will enable bounce buffer quirk in the
|
||
|
* generic SDHCI driver, which will make sure DMA is only done
|
||
|
* from supported memory regions:
|
||
|
*/
|
||
|
if (priv->hw_version == XENON_AC5) {
|
||
|
si_meminfo(&si);
|
||
|
if (si.totalram * si.mem_unit > SZ_2G) {
|
||
|
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
|
||
|
host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return xenon_phy_parse_params(dev, host);
|
||
|
}
|
||
|
|
||
|
static int xenon_sdhc_prepare(struct sdhci_host *host)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
u8 sdhc_id = priv->sdhc_id;
|
||
|
|
||
|
/* Enable SDHC */
|
||
|
xenon_enable_sdhc(host, sdhc_id);
|
||
|
|
||
|
/* Enable ACG */
|
||
|
xenon_set_acg(host, true);
|
||
|
|
||
|
/* Enable Parallel Transfer Mode */
|
||
|
xenon_enable_sdhc_parallel_tran(host, sdhc_id);
|
||
|
|
||
|
/* Disable SDCLK-Off-While-Idle before card init */
|
||
|
xenon_set_sdclk_off_idle(host, sdhc_id, false);
|
||
|
|
||
|
xenon_mask_cmd_conflict_err(host);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void xenon_sdhc_unprepare(struct sdhci_host *host)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
u8 sdhc_id = priv->sdhc_id;
|
||
|
|
||
|
/* disable SDHC */
|
||
|
xenon_disable_sdhc(host, sdhc_id);
|
||
|
}
|
||
|
|
||
|
static int xenon_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct sdhci_host *host;
|
||
|
struct xenon_priv *priv;
|
||
|
int err;
|
||
|
|
||
|
host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
|
||
|
sizeof(struct xenon_priv));
|
||
|
if (IS_ERR(host))
|
||
|
return PTR_ERR(host);
|
||
|
|
||
|
pltfm_host = sdhci_priv(host);
|
||
|
priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
priv->hw_version = (unsigned long)device_get_match_data(&pdev->dev);
|
||
|
|
||
|
/*
|
||
|
* Link Xenon specific mmc_host_ops function,
|
||
|
* to replace standard ones in sdhci_ops.
|
||
|
*/
|
||
|
xenon_replace_mmc_host_ops(host);
|
||
|
|
||
|
if (dev->of_node) {
|
||
|
pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
|
||
|
if (IS_ERR(pltfm_host->clk)) {
|
||
|
err = PTR_ERR(pltfm_host->clk);
|
||
|
dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
|
||
|
goto free_pltfm;
|
||
|
}
|
||
|
err = clk_prepare_enable(pltfm_host->clk);
|
||
|
if (err)
|
||
|
goto free_pltfm;
|
||
|
|
||
|
priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
|
||
|
if (IS_ERR(priv->axi_clk)) {
|
||
|
err = PTR_ERR(priv->axi_clk);
|
||
|
if (err == -EPROBE_DEFER)
|
||
|
goto err_clk;
|
||
|
} else {
|
||
|
err = clk_prepare_enable(priv->axi_clk);
|
||
|
if (err)
|
||
|
goto err_clk;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
err = mmc_of_parse(host->mmc);
|
||
|
if (err)
|
||
|
goto err_clk_axi;
|
||
|
|
||
|
sdhci_get_property(pdev);
|
||
|
|
||
|
xenon_set_acg(host, false);
|
||
|
|
||
|
/* Xenon specific parameters parse */
|
||
|
err = xenon_probe_params(pdev);
|
||
|
if (err)
|
||
|
goto err_clk_axi;
|
||
|
|
||
|
err = xenon_sdhc_prepare(host);
|
||
|
if (err)
|
||
|
goto err_clk_axi;
|
||
|
|
||
|
pm_runtime_get_noresume(&pdev->dev);
|
||
|
pm_runtime_set_active(&pdev->dev);
|
||
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
|
||
|
pm_runtime_use_autosuspend(&pdev->dev);
|
||
|
pm_runtime_enable(&pdev->dev);
|
||
|
pm_suspend_ignore_children(&pdev->dev, 1);
|
||
|
|
||
|
err = sdhci_add_host(host);
|
||
|
if (err)
|
||
|
goto remove_sdhc;
|
||
|
|
||
|
pm_runtime_put_autosuspend(&pdev->dev);
|
||
|
/*
|
||
|
* If we previously detected AC5 with over 2GB of memory,
|
||
|
* then we disable ADMA and 64-bit DMA.
|
||
|
* This means generic SDHCI driver has set the DMA mask to
|
||
|
* 32-bit. Since DDR starts at 0x2_0000_0000, we must use
|
||
|
* 34-bit DMA mask to access this DDR memory:
|
||
|
*/
|
||
|
if (priv->hw_version == XENON_AC5 &&
|
||
|
host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA)
|
||
|
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(34));
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
remove_sdhc:
|
||
|
pm_runtime_disable(&pdev->dev);
|
||
|
pm_runtime_put_noidle(&pdev->dev);
|
||
|
xenon_sdhc_unprepare(host);
|
||
|
err_clk_axi:
|
||
|
clk_disable_unprepare(priv->axi_clk);
|
||
|
err_clk:
|
||
|
clk_disable_unprepare(pltfm_host->clk);
|
||
|
free_pltfm:
|
||
|
sdhci_pltfm_free(pdev);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void xenon_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
pm_runtime_get_sync(&pdev->dev);
|
||
|
pm_runtime_disable(&pdev->dev);
|
||
|
pm_runtime_put_noidle(&pdev->dev);
|
||
|
|
||
|
sdhci_remove_host(host, 0);
|
||
|
|
||
|
xenon_sdhc_unprepare(host);
|
||
|
clk_disable_unprepare(priv->axi_clk);
|
||
|
clk_disable_unprepare(pltfm_host->clk);
|
||
|
|
||
|
sdhci_pltfm_free(pdev);
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_PM_SLEEP
|
||
|
static int xenon_suspend(struct device *dev)
|
||
|
{
|
||
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
int ret;
|
||
|
|
||
|
ret = pm_runtime_force_suspend(dev);
|
||
|
|
||
|
priv->restore_needed = true;
|
||
|
return ret;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#ifdef CONFIG_PM
|
||
|
static int xenon_runtime_suspend(struct device *dev)
|
||
|
{
|
||
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
int ret;
|
||
|
|
||
|
ret = sdhci_runtime_suspend_host(host);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
|
||
|
mmc_retune_needed(host->mmc);
|
||
|
|
||
|
clk_disable_unprepare(pltfm_host->clk);
|
||
|
/*
|
||
|
* Need to update the priv->clock here, or when runtime resume
|
||
|
* back, phy don't aware the clock change and won't adjust phy
|
||
|
* which will cause cmd err
|
||
|
*/
|
||
|
priv->clock = 0;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int xenon_runtime_resume(struct device *dev)
|
||
|
{
|
||
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
||
|
int ret;
|
||
|
|
||
|
ret = clk_prepare_enable(pltfm_host->clk);
|
||
|
if (ret) {
|
||
|
dev_err(dev, "can't enable mainck\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (priv->restore_needed) {
|
||
|
ret = xenon_sdhc_prepare(host);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
priv->restore_needed = false;
|
||
|
}
|
||
|
|
||
|
ret = sdhci_runtime_resume_host(host, 0);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
return 0;
|
||
|
out:
|
||
|
clk_disable_unprepare(pltfm_host->clk);
|
||
|
return ret;
|
||
|
}
|
||
|
#endif /* CONFIG_PM */
|
||
|
|
||
|
static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = {
|
||
|
SET_SYSTEM_SLEEP_PM_OPS(xenon_suspend,
|
||
|
pm_runtime_force_resume)
|
||
|
SET_RUNTIME_PM_OPS(xenon_runtime_suspend,
|
||
|
xenon_runtime_resume,
|
||
|
NULL)
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id sdhci_xenon_dt_ids[] = {
|
||
|
{ .compatible = "marvell,armada-ap806-sdhci", .data = (void *)XENON_AP806},
|
||
|
{ .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
|
||
|
{ .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110},
|
||
|
{ .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700},
|
||
|
{ .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AC5},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
|
||
|
|
||
|
#ifdef CONFIG_ACPI
|
||
|
static const struct acpi_device_id sdhci_xenon_acpi_ids[] = {
|
||
|
{ .id = "MRVL0002", XENON_AP806},
|
||
|
{ .id = "MRVL0003", XENON_AP807},
|
||
|
{ .id = "MRVL0004", XENON_CP110},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(acpi, sdhci_xenon_acpi_ids);
|
||
|
#endif
|
||
|
|
||
|
static struct platform_driver sdhci_xenon_driver = {
|
||
|
.driver = {
|
||
|
.name = "xenon-sdhci",
|
||
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
||
|
.of_match_table = sdhci_xenon_dt_ids,
|
||
|
.acpi_match_table = ACPI_PTR(sdhci_xenon_acpi_ids),
|
||
|
.pm = &sdhci_xenon_dev_pm_ops,
|
||
|
},
|
||
|
.probe = xenon_probe,
|
||
|
.remove_new = xenon_remove,
|
||
|
};
|
||
|
|
||
|
module_platform_driver(sdhci_xenon_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
|
||
|
MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
|
||
|
MODULE_LICENSE("GPL v2");
|