487 lines
12 KiB
C
487 lines
12 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
/*
|
||
|
|
* TI LP8860 4-Channel LED Driver
|
||
|
|
*
|
||
|
|
* Copyright (C) 2014 Texas Instruments
|
||
|
|
*
|
||
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/i2c.h>
|
||
|
|
#include <linux/init.h>
|
||
|
|
#include <linux/leds.h>
|
||
|
|
#include <linux/regmap.h>
|
||
|
|
#include <linux/regulator/consumer.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/mutex.h>
|
||
|
|
#include <linux/of.h>
|
||
|
|
#include <linux/gpio/consumer.h>
|
||
|
|
#include <linux/slab.h>
|
||
|
|
|
||
|
|
#define LP8860_DISP_CL1_BRT_MSB 0x00
|
||
|
|
#define LP8860_DISP_CL1_BRT_LSB 0x01
|
||
|
|
#define LP8860_DISP_CL1_CURR_MSB 0x02
|
||
|
|
#define LP8860_DISP_CL1_CURR_LSB 0x03
|
||
|
|
#define LP8860_CL2_BRT_MSB 0x04
|
||
|
|
#define LP8860_CL2_BRT_LSB 0x05
|
||
|
|
#define LP8860_CL2_CURRENT 0x06
|
||
|
|
#define LP8860_CL3_BRT_MSB 0x07
|
||
|
|
#define LP8860_CL3_BRT_LSB 0x08
|
||
|
|
#define LP8860_CL3_CURRENT 0x09
|
||
|
|
#define LP8860_CL4_BRT_MSB 0x0a
|
||
|
|
#define LP8860_CL4_BRT_LSB 0x0b
|
||
|
|
#define LP8860_CL4_CURRENT 0x0c
|
||
|
|
#define LP8860_CONFIG 0x0d
|
||
|
|
#define LP8860_STATUS 0x0e
|
||
|
|
#define LP8860_FAULT 0x0f
|
||
|
|
#define LP8860_LED_FAULT 0x10
|
||
|
|
#define LP8860_FAULT_CLEAR 0x11
|
||
|
|
#define LP8860_ID 0x12
|
||
|
|
#define LP8860_TEMP_MSB 0x13
|
||
|
|
#define LP8860_TEMP_LSB 0x14
|
||
|
|
#define LP8860_DISP_LED_CURR_MSB 0x15
|
||
|
|
#define LP8860_DISP_LED_CURR_LSB 0x16
|
||
|
|
#define LP8860_DISP_LED_PWM_MSB 0x17
|
||
|
|
#define LP8860_DISP_LED_PWM_LSB 0x18
|
||
|
|
#define LP8860_EEPROM_CNTRL 0x19
|
||
|
|
#define LP8860_EEPROM_UNLOCK 0x1a
|
||
|
|
|
||
|
|
#define LP8860_EEPROM_REG_0 0x60
|
||
|
|
#define LP8860_EEPROM_REG_1 0x61
|
||
|
|
#define LP8860_EEPROM_REG_2 0x62
|
||
|
|
#define LP8860_EEPROM_REG_3 0x63
|
||
|
|
#define LP8860_EEPROM_REG_4 0x64
|
||
|
|
#define LP8860_EEPROM_REG_5 0x65
|
||
|
|
#define LP8860_EEPROM_REG_6 0x66
|
||
|
|
#define LP8860_EEPROM_REG_7 0x67
|
||
|
|
#define LP8860_EEPROM_REG_8 0x68
|
||
|
|
#define LP8860_EEPROM_REG_9 0x69
|
||
|
|
#define LP8860_EEPROM_REG_10 0x6a
|
||
|
|
#define LP8860_EEPROM_REG_11 0x6b
|
||
|
|
#define LP8860_EEPROM_REG_12 0x6c
|
||
|
|
#define LP8860_EEPROM_REG_13 0x6d
|
||
|
|
#define LP8860_EEPROM_REG_14 0x6e
|
||
|
|
#define LP8860_EEPROM_REG_15 0x6f
|
||
|
|
#define LP8860_EEPROM_REG_16 0x70
|
||
|
|
#define LP8860_EEPROM_REG_17 0x71
|
||
|
|
#define LP8860_EEPROM_REG_18 0x72
|
||
|
|
#define LP8860_EEPROM_REG_19 0x73
|
||
|
|
#define LP8860_EEPROM_REG_20 0x74
|
||
|
|
#define LP8860_EEPROM_REG_21 0x75
|
||
|
|
#define LP8860_EEPROM_REG_22 0x76
|
||
|
|
#define LP8860_EEPROM_REG_23 0x77
|
||
|
|
#define LP8860_EEPROM_REG_24 0x78
|
||
|
|
|
||
|
|
#define LP8860_LOCK_EEPROM 0x00
|
||
|
|
#define LP8860_UNLOCK_EEPROM 0x01
|
||
|
|
#define LP8860_PROGRAM_EEPROM 0x02
|
||
|
|
#define LP8860_EEPROM_CODE_1 0x08
|
||
|
|
#define LP8860_EEPROM_CODE_2 0xba
|
||
|
|
#define LP8860_EEPROM_CODE_3 0xef
|
||
|
|
|
||
|
|
#define LP8860_CLEAR_FAULTS 0x01
|
||
|
|
|
||
|
|
#define LP8860_NAME "lp8860"
|
||
|
|
|
||
|
|
/**
|
||
|
|
* struct lp8860_led
|
||
|
|
* @lock: Lock for reading/writing the device
|
||
|
|
* @client: Pointer to the I2C client
|
||
|
|
* @led_dev: led class device pointer
|
||
|
|
* @regmap: Devices register map
|
||
|
|
* @eeprom_regmap: EEPROM register map
|
||
|
|
* @enable_gpio: VDDIO/EN gpio to enable communication interface
|
||
|
|
* @regulator: LED supply regulator pointer
|
||
|
|
*/
|
||
|
|
struct lp8860_led {
|
||
|
|
struct mutex lock;
|
||
|
|
struct i2c_client *client;
|
||
|
|
struct led_classdev led_dev;
|
||
|
|
struct regmap *regmap;
|
||
|
|
struct regmap *eeprom_regmap;
|
||
|
|
struct gpio_desc *enable_gpio;
|
||
|
|
struct regulator *regulator;
|
||
|
|
};
|
||
|
|
|
||
|
|
struct lp8860_eeprom_reg {
|
||
|
|
uint8_t reg;
|
||
|
|
uint8_t value;
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
|
||
|
|
{ LP8860_EEPROM_REG_0, 0xed },
|
||
|
|
{ LP8860_EEPROM_REG_1, 0xdf },
|
||
|
|
{ LP8860_EEPROM_REG_2, 0xdc },
|
||
|
|
{ LP8860_EEPROM_REG_3, 0xf0 },
|
||
|
|
{ LP8860_EEPROM_REG_4, 0xdf },
|
||
|
|
{ LP8860_EEPROM_REG_5, 0xe5 },
|
||
|
|
{ LP8860_EEPROM_REG_6, 0xf2 },
|
||
|
|
{ LP8860_EEPROM_REG_7, 0x77 },
|
||
|
|
{ LP8860_EEPROM_REG_8, 0x77 },
|
||
|
|
{ LP8860_EEPROM_REG_9, 0x71 },
|
||
|
|
{ LP8860_EEPROM_REG_10, 0x3f },
|
||
|
|
{ LP8860_EEPROM_REG_11, 0xb7 },
|
||
|
|
{ LP8860_EEPROM_REG_12, 0x17 },
|
||
|
|
{ LP8860_EEPROM_REG_13, 0xef },
|
||
|
|
{ LP8860_EEPROM_REG_14, 0xb0 },
|
||
|
|
{ LP8860_EEPROM_REG_15, 0x87 },
|
||
|
|
{ LP8860_EEPROM_REG_16, 0xce },
|
||
|
|
{ LP8860_EEPROM_REG_17, 0x72 },
|
||
|
|
{ LP8860_EEPROM_REG_18, 0xe5 },
|
||
|
|
{ LP8860_EEPROM_REG_19, 0xdf },
|
||
|
|
{ LP8860_EEPROM_REG_20, 0x35 },
|
||
|
|
{ LP8860_EEPROM_REG_21, 0x06 },
|
||
|
|
{ LP8860_EEPROM_REG_22, 0xdc },
|
||
|
|
{ LP8860_EEPROM_REG_23, 0x88 },
|
||
|
|
{ LP8860_EEPROM_REG_24, 0x3E },
|
||
|
|
};
|
||
|
|
|
||
|
|
static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
|
||
|
|
{
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
mutex_lock(&led->lock);
|
||
|
|
|
||
|
|
if (lock == LP8860_UNLOCK_EEPROM) {
|
||
|
|
ret = regmap_write(led->regmap,
|
||
|
|
LP8860_EEPROM_UNLOCK,
|
||
|
|
LP8860_EEPROM_CODE_1);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "EEPROM Unlock failed\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = regmap_write(led->regmap,
|
||
|
|
LP8860_EEPROM_UNLOCK,
|
||
|
|
LP8860_EEPROM_CODE_2);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "EEPROM Unlock failed\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
ret = regmap_write(led->regmap,
|
||
|
|
LP8860_EEPROM_UNLOCK,
|
||
|
|
LP8860_EEPROM_CODE_3);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "EEPROM Unlock failed\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
} else {
|
||
|
|
ret = regmap_write(led->regmap,
|
||
|
|
LP8860_EEPROM_UNLOCK,
|
||
|
|
LP8860_LOCK_EEPROM);
|
||
|
|
}
|
||
|
|
|
||
|
|
out:
|
||
|
|
mutex_unlock(&led->lock);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int lp8860_fault_check(struct lp8860_led *led)
|
||
|
|
{
|
||
|
|
int ret, fault;
|
||
|
|
unsigned int read_buf;
|
||
|
|
|
||
|
|
ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
|
||
|
|
if (ret)
|
||
|
|
goto out;
|
||
|
|
|
||
|
|
fault = read_buf;
|
||
|
|
|
||
|
|
ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
|
||
|
|
if (ret)
|
||
|
|
goto out;
|
||
|
|
|
||
|
|
fault |= read_buf;
|
||
|
|
|
||
|
|
/* Attempt to clear any faults */
|
||
|
|
if (fault)
|
||
|
|
ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
|
||
|
|
LP8860_CLEAR_FAULTS);
|
||
|
|
out:
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int lp8860_brightness_set(struct led_classdev *led_cdev,
|
||
|
|
enum led_brightness brt_val)
|
||
|
|
{
|
||
|
|
struct lp8860_led *led =
|
||
|
|
container_of(led_cdev, struct lp8860_led, led_dev);
|
||
|
|
int disp_brightness = brt_val * 255;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
mutex_lock(&led->lock);
|
||
|
|
|
||
|
|
ret = lp8860_fault_check(led);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "Cannot read/clear faults\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
|
||
|
|
(disp_brightness & 0xff00) >> 8);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
|
||
|
|
disp_brightness & 0xff);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
out:
|
||
|
|
mutex_unlock(&led->lock);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int lp8860_init(struct lp8860_led *led)
|
||
|
|
{
|
||
|
|
unsigned int read_buf;
|
||
|
|
int ret, i, reg_count;
|
||
|
|
|
||
|
|
if (led->regulator) {
|
||
|
|
ret = regulator_enable(led->regulator);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev,
|
||
|
|
"Failed to enable regulator\n");
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
gpiod_direction_output(led->enable_gpio, 1);
|
||
|
|
|
||
|
|
ret = lp8860_fault_check(led);
|
||
|
|
if (ret)
|
||
|
|
goto out;
|
||
|
|
|
||
|
|
ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
|
||
|
|
if (ret)
|
||
|
|
goto out;
|
||
|
|
|
||
|
|
ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
|
||
|
|
reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
|
||
|
|
for (i = 0; i < reg_count; i++) {
|
||
|
|
ret = regmap_write(led->eeprom_regmap,
|
||
|
|
lp8860_eeprom_disp_regs[i].reg,
|
||
|
|
lp8860_eeprom_disp_regs[i].value);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "Failed writing EEPROM\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
|
||
|
|
if (ret)
|
||
|
|
goto out;
|
||
|
|
|
||
|
|
ret = regmap_write(led->regmap,
|
||
|
|
LP8860_EEPROM_CNTRL,
|
||
|
|
LP8860_PROGRAM_EEPROM);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&led->client->dev, "Failed programming EEPROM\n");
|
||
|
|
goto out;
|
||
|
|
}
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
out:
|
||
|
|
if (ret)
|
||
|
|
gpiod_direction_output(led->enable_gpio, 0);
|
||
|
|
|
||
|
|
if (led->regulator) {
|
||
|
|
ret = regulator_disable(led->regulator);
|
||
|
|
if (ret)
|
||
|
|
dev_err(&led->client->dev,
|
||
|
|
"Failed to disable regulator\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct reg_default lp8860_reg_defs[] = {
|
||
|
|
{ LP8860_DISP_CL1_BRT_MSB, 0x00},
|
||
|
|
{ LP8860_DISP_CL1_BRT_LSB, 0x00},
|
||
|
|
{ LP8860_DISP_CL1_CURR_MSB, 0x00},
|
||
|
|
{ LP8860_DISP_CL1_CURR_LSB, 0x00},
|
||
|
|
{ LP8860_CL2_BRT_MSB, 0x00},
|
||
|
|
{ LP8860_CL2_BRT_LSB, 0x00},
|
||
|
|
{ LP8860_CL2_CURRENT, 0x00},
|
||
|
|
{ LP8860_CL3_BRT_MSB, 0x00},
|
||
|
|
{ LP8860_CL3_BRT_LSB, 0x00},
|
||
|
|
{ LP8860_CL3_CURRENT, 0x00},
|
||
|
|
{ LP8860_CL4_BRT_MSB, 0x00},
|
||
|
|
{ LP8860_CL4_BRT_LSB, 0x00},
|
||
|
|
{ LP8860_CL4_CURRENT, 0x00},
|
||
|
|
{ LP8860_CONFIG, 0x00},
|
||
|
|
{ LP8860_FAULT_CLEAR, 0x00},
|
||
|
|
{ LP8860_EEPROM_CNTRL, 0x80},
|
||
|
|
{ LP8860_EEPROM_UNLOCK, 0x00},
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct regmap_config lp8860_regmap_config = {
|
||
|
|
.reg_bits = 8,
|
||
|
|
.val_bits = 8,
|
||
|
|
|
||
|
|
.max_register = LP8860_EEPROM_UNLOCK,
|
||
|
|
.reg_defaults = lp8860_reg_defs,
|
||
|
|
.num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
|
||
|
|
.cache_type = REGCACHE_NONE,
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct reg_default lp8860_eeprom_defs[] = {
|
||
|
|
{ LP8860_EEPROM_REG_0, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_1, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_2, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_3, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_4, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_5, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_6, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_7, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_8, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_9, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_10, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_11, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_12, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_13, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_14, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_15, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_16, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_17, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_18, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_19, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_20, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_21, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_22, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_23, 0x00 },
|
||
|
|
{ LP8860_EEPROM_REG_24, 0x00 },
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct regmap_config lp8860_eeprom_regmap_config = {
|
||
|
|
.reg_bits = 8,
|
||
|
|
.val_bits = 8,
|
||
|
|
|
||
|
|
.max_register = LP8860_EEPROM_REG_24,
|
||
|
|
.reg_defaults = lp8860_eeprom_defs,
|
||
|
|
.num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
|
||
|
|
.cache_type = REGCACHE_NONE,
|
||
|
|
};
|
||
|
|
|
||
|
|
static int lp8860_probe(struct i2c_client *client)
|
||
|
|
{
|
||
|
|
int ret;
|
||
|
|
struct lp8860_led *led;
|
||
|
|
struct device_node *np = dev_of_node(&client->dev);
|
||
|
|
struct device_node *child_node;
|
||
|
|
struct led_init_data init_data = {};
|
||
|
|
|
||
|
|
led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
|
||
|
|
if (!led)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
child_node = of_get_next_available_child(np, NULL);
|
||
|
|
if (!child_node)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
led->enable_gpio = devm_gpiod_get_optional(&client->dev,
|
||
|
|
"enable", GPIOD_OUT_LOW);
|
||
|
|
if (IS_ERR(led->enable_gpio)) {
|
||
|
|
ret = PTR_ERR(led->enable_gpio);
|
||
|
|
dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
led->regulator = devm_regulator_get(&client->dev, "vled");
|
||
|
|
if (IS_ERR(led->regulator))
|
||
|
|
led->regulator = NULL;
|
||
|
|
|
||
|
|
led->client = client;
|
||
|
|
led->led_dev.brightness_set_blocking = lp8860_brightness_set;
|
||
|
|
|
||
|
|
mutex_init(&led->lock);
|
||
|
|
|
||
|
|
i2c_set_clientdata(client, led);
|
||
|
|
|
||
|
|
led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
|
||
|
|
if (IS_ERR(led->regmap)) {
|
||
|
|
ret = PTR_ERR(led->regmap);
|
||
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||
|
|
ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
|
||
|
|
if (IS_ERR(led->eeprom_regmap)) {
|
||
|
|
ret = PTR_ERR(led->eeprom_regmap);
|
||
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||
|
|
ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = lp8860_init(led);
|
||
|
|
if (ret)
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
init_data.fwnode = of_fwnode_handle(child_node);
|
||
|
|
init_data.devicename = LP8860_NAME;
|
||
|
|
init_data.default_label = ":display_cluster";
|
||
|
|
|
||
|
|
ret = devm_led_classdev_register_ext(&client->dev, &led->led_dev,
|
||
|
|
&init_data);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(&client->dev, "led register err: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void lp8860_remove(struct i2c_client *client)
|
||
|
|
{
|
||
|
|
struct lp8860_led *led = i2c_get_clientdata(client);
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
gpiod_direction_output(led->enable_gpio, 0);
|
||
|
|
|
||
|
|
if (led->regulator) {
|
||
|
|
ret = regulator_disable(led->regulator);
|
||
|
|
if (ret)
|
||
|
|
dev_err(&led->client->dev,
|
||
|
|
"Failed to disable regulator\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
mutex_destroy(&led->lock);
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct i2c_device_id lp8860_id[] = {
|
||
|
|
{ "lp8860", 0 },
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(i2c, lp8860_id);
|
||
|
|
|
||
|
|
static const struct of_device_id of_lp8860_leds_match[] = {
|
||
|
|
{ .compatible = "ti,lp8860", },
|
||
|
|
{},
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
|
||
|
|
|
||
|
|
static struct i2c_driver lp8860_driver = {
|
||
|
|
.driver = {
|
||
|
|
.name = "lp8860",
|
||
|
|
.of_match_table = of_lp8860_leds_match,
|
||
|
|
},
|
||
|
|
.probe = lp8860_probe,
|
||
|
|
.remove = lp8860_remove,
|
||
|
|
.id_table = lp8860_id,
|
||
|
|
};
|
||
|
|
module_i2c_driver(lp8860_driver);
|
||
|
|
|
||
|
|
MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
|
||
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
|
||
|
|
MODULE_LICENSE("GPL v2");
|