mirror_ubuntu-kernels/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts

// SPDX-License-Identifier: GPL-2.0-only

/dts-v1/;

#include "msm8939-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Huawei Honor 5X / GR5 (2016)";
	compatible = "huawei,kiwi", "qcom,msm8939";
	chassis-type = "handset";

	aliases {
		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
		mmc1 = &sdhc_2; /* SDC2 SD card slot */
		serial0 = &blsp_uart2;
	};

	chosen {
		stdout-path = "serial0";
	};

	reserved-memory {
		qseecom_mem: qseecom@84a00000 {
			reg = <0x0 0x84a00000 0x0 0x1600000>;
			no-map;
		};
	};

	gpio-hall-sensor {
		compatible = "gpio-keys";

		pinctrl-0 = <&gpio_hall_sensor_default>;
		pinctrl-names = "default";

		label = "GPIO Hall Effect Sensor";

		event-hall-sensor {
			label = "Hall Effect Sensor";
			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
			linux,input-type = <EV_SW>;
			linux,code = <SW_LID>;
			linux,can-disable;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&gpio_keys_default>;
		pinctrl-names = "default";

		label = "GPIO Buttons";

		button-volume-up {
			label = "Volume Up";
			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	usb_id: usb-id {
		compatible = "linux,extcon-usb-gpio";
		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&usb_id_default>;
		pinctrl-names = "default";
	};
};

&blsp_i2c2 {
	status = "okay";

	accelerometer@1e {
		compatible = "kionix,kx023-1025";
		reg = <0x1e>;

		vdd-supply = <&pm8916_l17>;
		vddio-supply = <&pm8916_l6>;
		pinctrl-0 = <&accel_int_default>;
		pinctrl-names = "default";
		mount-matrix = "-1", "0", "0",
			       "0", "1", "0",
			       "0", "0", "1";
	};

	proximity@39 {
		compatible = "avago,apds9930";
		reg = <0x39>;

		interrupt-parent = <&tlmm>;
		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;

		vdd-supply = <&pm8916_l17>;
		vddio-supply = <&pm8916_l6>;

		led-max-microamp = <25000>;
		amstaos,proximity-diodes = <0>;

		pinctrl-0 = <&prox_irq_default>;
		pinctrl-names = "default";
	};
};

&blsp_i2c5 {
	status = "okay";

	touchscreen@1c {
		compatible = "cypress,tt21000";

		reg = <0x1c>;
		interrupt-parent = <&tlmm>;
		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;

		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;

		/*
		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
		 * fixed regulator that is automatically enabled by pm8916_l16.
		 */
		vdd-supply = <&pm8916_l16>;
		vddio-supply = <&pm8916_l16>;

		pinctrl-0 = <&touchscreen_default>;
		pinctrl-names = "default";
	};
};

&blsp_uart2 {
	status = "okay";
};

&pm8916_l8 {
	regulator-min-microvolt = <2950000>;
	regulator-max-microvolt = <2950000>;
};

&pm8916_resin {
	linux,code = <KEY_VOLUMEDOWN>;
	status = "okay";
};

&pm8916_rpm_regulators {
	pm8916_l16: l16 {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	pm8916_l17: l17 {
		regulator-min-microvolt = <2850000>;
		regulator-max-microvolt = <2850000>;
	};
};

&pm8916_vib {
	status = "okay";
};

&sdhc_1 {
	status = "okay";
};

&sdhc_2 {
	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
	pinctrl-names = "default", "sleep";

	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;

	status = "okay";
};

&usb {
	extcon = <&usb_id>, <&usb_id>;
	status = "okay";
};

&usb_hs_phy {
	extcon = <&usb_id>;
};

&wcnss {
	status = "okay";
};

&wcnss_iris {
	compatible = "qcom,wcn3620";
};

&wcnss_mem {
	status = "okay";
};

&tlmm {
	accel_int_default: accel-int-default-state {
		pins = "gpio115";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
		pins = "gpio69";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	gpio_keys_default: gpio-keys-default-state {
		pins = "gpio107";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	prox_irq_default: prox-irq-default-state {
		pins = "gpio113";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	sdc2_cd_default: sdc2-cd-default-state {
		pins = "gpio38";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	touchscreen_default: touchscreen-default-state {
		pins = "gpio12", "gpio13";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	usb_id_default: usb-id-default-state {
		pins = "gpio110";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};
};