mirror_ubuntu-kernels/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi

// SPDX-License-Identifier: (GPL-2.0 OR MIT)

#include "imx8mp.dtsi"

#include <dt-bindings/leds/common.h>

/ {
	aliases {
		/* some of this aliases like backlight0, ethernetX and switch0
		 * are needed for the bootloader.
		 */
		backlight0 = &backlight;
		ethernet0 = &eqos;
		ethernet1 = &lan1;
		ethernet2 = &lan2;
		rtc0 = &i2c_rtc;
		rtc1 = &snvs_rtc;
		switch0 = &switch;
	};

	/*
	 * Backlight is present only on some of boards, so it is disabled by
	 * default.
	 */
	backlight: backlight {
		compatible = "pwm-backlight";
		pinctrl-0 = <&pinctrl_backlight>;
		pwms = <&pwm1 0 20000 0>;
		power-supply = <&reg_24v>;
		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
		brightness-levels = <0 255>;
		num-interpolated-steps = <17>;
		default-brightness-level = <8>;
		status = "disabled";
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_led>;

		led-0 {
			label = "D1";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
			function = LED_FUNCTION_STATUS;
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};

		led-1 {
			label = "D2";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		led-2 {
			label = "D3";
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
			default-state = "on";
		};
	};

	reg_1v2: regulator-1v2 {
		compatible = "regulator-fixed";
		vin-supply = <&reg_5v_p>;
		regulator-name = "1V2";
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;
	};

	reg_2v5: regulator-2v5 {
		compatible = "regulator-fixed";
		vin-supply = <&reg_5v_s>;
		regulator-name = "2V5";
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
	};

	reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		vin-supply = <&reg_5v_s>;
		regulator-name = "3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	/*
	 * This regulator will provide power as long as possible even if
	 * undervoltage is detected.
	 */
	reg_5v_p: regulator-5v-p {
		compatible = "regulator-fixed";
		regulator-name = "5V_P";
		vin-supply = <&reg_24v>;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	/*
	 * This regulator will be automatically shutdown if undervoltage is
	 * detected.
	 */
	reg_5v_s: regulator-5v-s {
		compatible = "regulator-fixed";
		regulator-name = "5V_S";
		vin-supply = <&reg_24v>;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_24v: regulator-24v {
		compatible = "regulator-fixed";
		regulator-name = "24V";
		regulator-min-microvolt = <24000000>;
		regulator-max-microvolt = <24000000>;
	};

	reg_can2rs: regulator-can2rs {
		compatible = "regulator-fixed";
		regulator-name = "CAN2RS";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can2rs>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
	};

	reg_canrs: regulator-canrs {
		compatible = "regulator-fixed";
		regulator-name = "CANRS";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_canrs>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
	};

	reg_tft_vcom: regulator-tft-vcom {
		compatible = "pwm-regulator";
		pwms = <&pwm4 0 20000 0>;
		regulator-name = "VCOM";
		vin-supply = <&reg_5v_s>;
		regulator-min-microvolt = <3600000>;
		regulator-max-microvolt = <3600000>;
		regulator-always-on;
		voltage-table = <3600000 26>;
		status = "disabled";
	};

	reg_vsd_3v3: regulator-vsd-3v3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
		vin-supply = <&reg_vdd_3v3>;
		compatible = "regulator-fixed";
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&A53_0 {
	cpu-supply = <&reg_vdd_arm>;
};

&A53_1 {
	cpu-supply = <&reg_vdd_arm>;
};

&A53_2 {
	cpu-supply = <&reg_vdd_arm>;
};

&A53_3 {
	cpu-supply = <&reg_vdd_arm>;
};

&ecspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
	status = "okay";

	adc: adc@0 {
		compatible = "microchip,mcp3002";
		reg = <0>;
		vref-supply = <&reg_vdd_3v3>;
		spi-max-frequency = <1000000>;
		#io-channel-cells = <1>;
	};
};

&eqos {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_eqos>;
	phy-mode = "rgmii-txid";
	status = "okay";

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	xceiver-supply = <&reg_canrs>;
	status = "okay";
};

&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	xceiver-supply = <&reg_can2rs>;
	status = "okay";
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic@25 {
		compatible = "nxp,pca9450c";
		reg = <0x25>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pmic>;
		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;

		regulators {
			reg_vdd_soc: BUCK1 {
				regulator-name = "VDD_SOC";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			reg_vdd_arm: BUCK2 {
				regulator-name = "VDD_ARM";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
				nxp,dvs-run-voltage = <950000>;
				nxp,dvs-standby-voltage = <850000>;
			};

			reg_vdd_3v3: BUCK4 {
				regulator-name = "VDD_3V3";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
			};

			reg_vdd_1v8: BUCK5 {
				regulator-name = "VDD_1V8";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
			};

			reg_nvcc_dram_1v1: BUCK6 {
				regulator-name = "NVCC_DRAM_1V1";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
			};

			reg_nvcc_snvs_1v8: LDO1 {
				regulator-name = "NVCC_SNVS_1V8";
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <3300000>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
			};

			reg_vdda_1v8: LDO3 {
				regulator-name = "VDDA_1V8";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
			};

			reg_nvcc_sd2: LDO5 {
				regulator-name = "NVCC_SD2";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				vin-supply = <&reg_5v_p>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	i2c_rtc: rtc@51 {
		compatible = "nxp,pcf85063tp";
		reg = <0x51>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_rtc>;
		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
		quartz-load-femtofarads = <12500>;
	};
};

&i2c4 {
	clock-frequency = <380000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";

	switch: switch@5f {
		compatible = "microchip,ksz9893";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_switch>;
		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
		reg = <0x5f>;

		ethernet-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			lan1: port@0 {
				reg = <0>;
				phy-mode = "internal";
				label = "lan1";
			};

			lan2: port@1 {
				reg = <1>;
				phy-mode = "internal";
				label = "lan2";
			};

			port@2 {
				reg = <2>;
				label = "cpu";
				ethernet = <&eqos>;
				phy-mode = "rgmii";
				/* 2ns RX delay is implemented on PCB */
				tx-internal-delay-ps = <2000>;
				rx-internal-delay-ps = <0>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};
		};
	};
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	/* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&usb3_0 {
	status = "okay";
};

&usb3_1 {
	status = "okay";
};

&usb3_phy0 {
	vbus-supply = <&reg_3v3>;
	status = "okay";
};

&usb3_phy1 {
	vbus-supply = <&reg_3v3>;
	status = "okay";
};

&usb_dwc3_0 {
	dr_mode = "host";
};

&usb_dwc3_1 {
	dr_mode = "host";
};

/* SD Card */
&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	vmmc-supply = <&reg_vsd_3v3>;
	vqmmc-supply = <&reg_nvcc_sd2>;
	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
	bus-width = <4>;
	status = "okay";
};

/* eMMC */
&usdhc3 {
	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
	assigned-clock-rates = <400000000>;
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
	vmmc-supply = <&reg_vdd_3v3>;
	vqmmc-supply = <&reg_vdd_1v8>;
	bus-width = <8>;
	no-sd;
	no-sdio;
	non-removable;
	status = "okay";
};

&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog>;
	fsl,ext-reset-output;
	status = "okay";
};

&iomuxc {
	pinctrl_backlight: backlightgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
		>;
	};

	pinctrl_can2rs: can2rsgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
		>;
	};

	pinctrl_canrs: canrsgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
		>;
	};

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
		>;
	};

	pinctrl_eqos: eqosgrp {
		fsl,pins = <
			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
		>;
	};

	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <
			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
		>;
	};

	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
		>;
	};

	pinctrl_gpio_led: gpioledgrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
		>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
		>;
	};

	pinctrl_i2c4: i2c4grp {
		fsl,pins = <
			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
		>;
	};

	pinctrl_pmic: pmicirqgrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04			0x41
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
		>;
	};

	pinctrl_pwm4: pwm4grp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
		>;
	};

	pinctrl_reg_vsd_3v3: regvsd3v3grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
		>;
	};

	pinctrl_rtc: rtcgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
		>;
	};

	pinctrl_switch: switchgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
		>;
	};

	pinctrl_touchscreen: touchscreengrp {
		fsl,pins = <
			/* external 10 k pull up */
			/* CTP_INT */
			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
			/* CTP_RST */
			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
		>;
	};

	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
		>;
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
		>;
	};

	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
		fsl,pins = <
			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
		>;
	};

	pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
		>;
	};

	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
		>;
	};

	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
		fsl,pins = <
			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
		>;
	};

	pinctrl_wdog: wdoggrp {
		fsl,pins = <
			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
		>;
	};
};